[PATCH V2 04/21] dt-bindings: cpufreq: tegra124: remove cpu_lp clock from required properties

[Joseph Lo <josephl@nvidia.com>]

The cpu_lp clock property is only needed when the CPUfreq driver
supports CPU cluster switching. But it was not a design for this driver
and it didn't handle that as well. So removing this property.

Cc: devicetree@vger.kernel.org
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
---
*V2:
 - add ack tag
---
 .../devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt   | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
index 031545a29caf..03196d5ea515 100644
--- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra124-cpufreq.txt
@@ -9,7 +9,6 @@ Required properties:
   See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
   - cpu_g: Clock mux for the fast CPU cluster.
-  - cpu_lp: Clock mux for the low-power CPU cluster.
   - pll_x: Fast PLL clocksource.
   - pll_p: Auxiliary PLL used during fast PLL rate changes.
   - dfll: Fast DFLL clocksource that also automatically scales CPU voltage.
@@ -30,11 +29,10 @@ cpus {
 		reg = <0>;
 
 		clocks = <&tegra_car TEGRA124_CLK_CCLK_G>,
-			 <&tegra_car TEGRA124_CLK_CCLK_LP>,
 			 <&tegra_car TEGRA124_CLK_PLL_X>,
 			 <&tegra_car TEGRA124_CLK_PLL_P>,
 			 <&dfll>;
-		clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+		clock-names = "cpu_g", "pll_x", "pll_p", "dfll";
 		clock-latency = <300000>;
 	};
 
-- 
2.19.2