From: Richard Leitner <richard.leitner@skidata.com> To: <dmitry.torokhov@gmail.com>, <mark.rutland@arm.com> Cc: <robh+dt@kernel.org>, <linux-input@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <richard.leitner@skidata.com> Subject: [RESEND PATCH v2 4/8] Input: sx8654 - add sx8655 and sx8656 to compatibles Date: Tue, 18 Dec 2018 09:36:02 +0100 [thread overview] Message-ID: <20181218083606.25795-5-richard.leitner@skidata.com> (raw) In-Reply-To: <20181218083606.25795-1-richard.leitner@skidata.com> As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- drivers/input/touchscreen/sx8654.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c index 238f56b1581b..afa4da138fe9 100644 --- a/drivers/input/touchscreen/sx8654.c +++ b/drivers/input/touchscreen/sx8654.c @@ -293,6 +293,8 @@ static int sx8654_probe(struct i2c_client *client, #ifdef CONFIG_OF static const struct of_device_id sx8654_of_match[] = { { .compatible = "semtech,sx8654", }, + { .compatible = "semtech,sx8655", }, + { .compatible = "semtech,sx8656", }, { }, }; MODULE_DEVICE_TABLE(of, sx8654_of_match); @@ -300,6 +302,8 @@ MODULE_DEVICE_TABLE(of, sx8654_of_match); static const struct i2c_device_id sx8654_id_table[] = { { "semtech_sx8654", 0 }, + { "semtech_sx8655", 0 }, + { "semtech_sx8656", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, sx8654_id_table); -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Richard Leitner <richard.leitner@skidata.com> To: dmitry.torokhov@gmail.com, mark.rutland@arm.com Cc: robh+dt@kernel.org, linux-input@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, richard.leitner@skidata.com Subject: [RESEND PATCH v2 4/8] Input: sx8654 - add sx8655 and sx8656 to compatibles Date: Tue, 18 Dec 2018 09:36:02 +0100 [thread overview] Message-ID: <20181218083606.25795-5-richard.leitner@skidata.com> (raw) In-Reply-To: <20181218083606.25795-1-richard.leitner@skidata.com> As the sx865[456] share the same datasheet and differ only in the presence of a "capacitive proximity detection circuit" and a "haptics motor driver for LRA/ERM" add them to the compatbiles. As the driver doesn't implement these features it should be no problem. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> --- drivers/input/touchscreen/sx8654.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c index 238f56b1581b..afa4da138fe9 100644 --- a/drivers/input/touchscreen/sx8654.c +++ b/drivers/input/touchscreen/sx8654.c @@ -293,6 +293,8 @@ static int sx8654_probe(struct i2c_client *client, #ifdef CONFIG_OF static const struct of_device_id sx8654_of_match[] = { { .compatible = "semtech,sx8654", }, + { .compatible = "semtech,sx8655", }, + { .compatible = "semtech,sx8656", }, { }, }; MODULE_DEVICE_TABLE(of, sx8654_of_match); @@ -300,6 +302,8 @@ MODULE_DEVICE_TABLE(of, sx8654_of_match); static const struct i2c_device_id sx8654_id_table[] = { { "semtech_sx8654", 0 }, + { "semtech_sx8655", 0 }, + { "semtech_sx8656", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, sx8654_id_table); -- 2.11.0
next prev parent reply other threads:[~2018-12-18 8:37 UTC|newest] Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-12-18 8:35 [RESEND PATCH v2 0/8] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner 2018-12-18 8:35 ` Richard Leitner 2018-12-18 8:35 ` [RESEND PATCH v2 1/8] dt-bindings: input: touchscreen: sx8654: add reset-gpio property Richard Leitner 2018-12-18 8:35 ` Richard Leitner 2018-12-18 8:36 ` [RESEND PATCH v2 2/8] Input: sx8654 - add reset-gpio support Richard Leitner 2018-12-18 8:36 ` Richard Leitner 2019-01-29 0:26 ` Dmitry Torokhov 2018-12-18 8:36 ` [RESEND PATCH v2 3/8] dt-bindings: input: touchscreen: sx8654: add compatible models Richard Leitner 2018-12-18 8:36 ` Richard Leitner 2018-12-18 8:36 ` Richard Leitner [this message] 2018-12-18 8:36 ` [RESEND PATCH v2 4/8] Input: sx8654 - add sx8655 and sx8656 to compatibles Richard Leitner 2019-01-29 0:26 ` Dmitry Torokhov 2018-12-18 8:39 ` [RESEND PATCH v2 5/8] dt-bindings: input: touchscreen: sx8654: add sx8650 to comatibles Richard Leitner 2018-12-18 8:39 ` Richard Leitner 2018-12-18 8:39 ` [RESEND PATCH v2 6/8] Input: sx8654 - add sx8650 support Richard Leitner 2018-12-18 8:39 ` Richard Leitner 2019-01-29 0:12 ` Dmitry Torokhov 2018-12-18 8:39 ` [RESEND PATCH v2 7/8] Input: sx8654 - use common of_touchscreen functions Richard Leitner 2018-12-18 8:39 ` Richard Leitner 2019-01-29 0:25 ` Dmitry Torokhov 2018-12-18 8:40 ` [RESEND PATCH v2 8/8] Input: sx8654 - convert #defined flags to BIT(x) Richard Leitner 2018-12-18 8:40 ` Richard Leitner 2019-01-29 0:25 ` Dmitry Torokhov 2019-01-29 5:40 ` Joe Perches 2019-01-29 11:23 ` Richard Leitner 2019-01-29 11:23 ` Richard Leitner 2019-02-05 7:27 ` Dmitry Torokhov 2019-01-03 10:08 ` [RESEND PATCH v2 0/8] Input: sx8654 - reset-gpio, sx865[056] support, etc Richard Leitner 2019-01-03 10:08 ` Richard Leitner
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181218083606.25795-5-richard.leitner@skidata.com \ --to=richard.leitner@skidata.com \ --cc=devicetree@vger.kernel.org \ --cc=dmitry.torokhov@gmail.com \ --cc=linux-input@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.