All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: "Thierry Reding" <thierry.reding@gmail.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>,
	"Daniel Lezcano" <daniel.lezcano@linaro.org>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Ralf Baechle" <ralf@linux-mips.org>,
	"Paul Burton" <paul.burton@mips.com>,
	"James Hogan" <jhogan@kernel.org>,
	"Jonathan Corbet" <corbet@lwn.net>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Cc: linux-pwm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-mips@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-clk@vger.kernel.org, Paul Cercueil <paul@crapouillou.net>
Subject: [PATCH v9 08/27] watchdog: jz4740: Use regmap provided by TCU driver
Date: Thu, 27 Dec 2018 19:13:00 +0100	[thread overview]
Message-ID: <20181227181319.31095-9-paul@crapouillou.net> (raw)
In-Reply-To: <20181227181319.31095-1-paul@crapouillou.net>

Since we broke the ABI by changing the clock, the driver was also
updated to use the regmap provided by the TCU driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
     v6: New patch
    
     v7: No change

     v8: No change

     v9: No change

 drivers/watchdog/jz4740_wdt.c | 30 ++++++++++++++----------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 1d504ecf45e1..0f54306aee25 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -13,6 +13,7 @@
  *
  */
 
+#include <linux/mfd/ingenic-tcu.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -25,10 +26,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of.h>
-
-#define JZ_REG_WDT_TIMER_DATA     0x0
-#define JZ_REG_WDT_COUNTER_ENABLE 0x4
-#define JZ_REG_WDT_TIMER_COUNTER  0x8
+#include <linux/regmap.h>
 
 #define DEFAULT_HEARTBEAT 5
 #define MAX_HEARTBEAT     2048
@@ -48,7 +46,7 @@ MODULE_PARM_DESC(heartbeat,
 
 struct jz4740_wdt_drvdata {
 	struct watchdog_device wdt;
-	void __iomem *base;
+	struct regmap *map;
 	struct clk *clk;
 	unsigned long clk_rate;
 };
@@ -57,7 +55,7 @@ static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
 	return 0;
 }
 
@@ -67,12 +65,12 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 	u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
 
-	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 
-	writew((u16)timeout_value, drvdata->base + JZ_REG_WDT_TIMER_DATA);
-	writew(0x0, drvdata->base + JZ_REG_WDT_TIMER_COUNTER);
+	regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
 
-	writeb(0x1, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
 
 	wdt_dev->timeout = new_timeout;
 	return 0;
@@ -96,7 +94,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writeb(0x0, drvdata->base + JZ_REG_WDT_COUNTER_ENABLE);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 	clk_disable_unprepare(drvdata->clk);
 
 	return 0;
@@ -138,7 +136,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct jz4740_wdt_drvdata *drvdata;
 	struct watchdog_device *jz4740_wdt;
-	struct resource	*res;
 	long rate;
 	int ret;
 
@@ -174,10 +171,11 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(jz4740_wdt, nowayout);
 	watchdog_set_drvdata(jz4740_wdt, drvdata);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	drvdata->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(drvdata->base))
-		return PTR_ERR(drvdata->base);
+	drvdata->map = dev_get_regmap(dev->parent, NULL);
+	if (!drvdata->map) {
+		dev_err(dev, "regmap not found\n");
+		return -EINVAL;
+	}
 
 	ret = devm_watchdog_register_device(&pdev->dev, &drvdata->wdt);
 	if (ret < 0)
-- 
2.11.0


  parent reply	other threads:[~2018-12-27 18:16 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-27 18:12 [PATCH v9 00/27] Ingenic TCU patchset v9 Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-12-28 21:48   ` Rob Herring
2018-12-28 21:48     ` Rob Herring
2018-12-27 18:12 ` [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-02-25 15:55   ` Daniel Lezcano
2019-02-25 22:59     ` Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-12-27 18:13 ` Paul Cercueil [this message]
2018-12-27 18:13 ` [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver Paul Cercueil
2019-01-05 19:42   ` Uwe Kleine-König
2019-01-05 20:46     ` Paul Cercueil
2019-01-05 21:18       ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 13/27] pwm: jz4740: Use clocks " Paul Cercueil
2019-01-05 19:45   ` Uwe Kleine-König
2019-01-05 20:52     ` Paul Cercueil
2019-01-05 21:19       ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation Paul Cercueil
2019-01-05 19:57   ` Uwe Kleine-König
2019-01-05 21:05     ` Paul Cercueil
2019-01-05 21:27       ` Uwe Kleine-König
2019-01-10 14:04         ` Paul Cercueil
2019-01-29 22:08           ` Stephen Boyd
2019-01-29 22:08             ` Stephen Boyd
2019-02-23  1:17           ` Paul Cercueil
2019-02-28 18:42             ` Stephen Boyd
2019-02-28 18:42               ` Stephen Boyd
2018-12-27 18:13 ` [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 18/27] clk: jz4740: Add TCU clock Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code Paul Cercueil

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20181227181319.31095-9-paul@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=corbet@lwn.net \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jhogan@kernel.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=paul.burton@mips.com \
    --cc=ralf@linux-mips.org \
    --cc=robh+dt@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.