All of lore.kernel.org
 help / color / mirror / Atom feed
From: <Tudor.Ambarus@microchip.com>
To: <broonie@kernel.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<Ludovic.Desroches@microchip.com>, <bbrezillon@kernel.org>,
	<Cyrille.Pitchen@microchip.com>, <bugalski.piotr@gmail.com>
Cc: <linux-spi@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <linux-mtd@lists.infradead.org>,
	<Tudor.Ambarus@microchip.com>
Subject: [PATCH v4 11/13] spi: atmel-quadspi: add support for named peripheral clock
Date: Mon, 4 Feb 2019 10:10:04 +0000	[thread overview]
Message-ID: <20190204100910.26701-12-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190204100910.26701-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Keep supporting unnamed
peripheral clock, to be backward compatible with old DTs.
While here, rename clk to pclk, to indicate that it is a
peripheral clock.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v4: collect R-b
v3: new patch

 drivers/spi/atmel-quadspi.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 19a3980775ad..336501d962e5 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -137,7 +137,7 @@
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
-	struct clk		*clk;
+	struct clk		*pclk;
 	struct platform_device	*pdev;
 	u32			pending;
 	u32			mr;
@@ -341,7 +341,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	src_rate = clk_get_rate(aq->clk);
+	src_rate = clk_get_rate(aq->pclk);
 	if (!src_rate)
 		return -EINVAL;
 
@@ -433,15 +433,18 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	}
 
 	/* Get the peripheral clock */
-	aq->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(aq->clk)) {
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
 		dev_err(&pdev->dev, "missing peripheral clock\n");
-		err = PTR_ERR(aq->clk);
+		err = PTR_ERR(aq->pclk);
 		goto exit;
 	}
 
 	/* Enable the peripheral clock */
-	err = clk_prepare_enable(aq->clk);
+	err = clk_prepare_enable(aq->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 		goto exit;
@@ -452,25 +455,25 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_clk;
+		goto disable_pclk;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(aq->clk);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
 exit:
 	spi_controller_put(ctrl);
 
@@ -484,7 +487,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
@@ -492,7 +495,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 
 	return 0;
 }
@@ -501,7 +504,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_prepare_enable(aq->clk);
+	clk_prepare_enable(aq->pclk);
 
 	return atmel_qspi_init(aq);
 }
-- 
2.9.5


WARNING: multiple messages have this Message-ID (diff)
From: <Tudor.Ambarus@microchip.com>
To: broonie@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
	Nicolas.Ferre@microchip.com, alexandre.belloni@bootlin.com,
	Ludovic.Desroches@microchip.com, bbrezillon@kernel.org,
	Cyrille.Pitchen@microchip.com, bugalski.piotr@gmail.com
Cc: linux-spi@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, linux-mtd@lists.infradead.org,
	Tudor.Ambarus@microchip.com
Subject: [PATCH v4 11/13] spi: atmel-quadspi: add support for named peripheral clock
Date: Mon, 4 Feb 2019 10:10:04 +0000	[thread overview]
Message-ID: <20190204100910.26701-12-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190204100910.26701-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Keep supporting unnamed
peripheral clock, to be backward compatible with old DTs.
While here, rename clk to pclk, to indicate that it is a
peripheral clock.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v4: collect R-b
v3: new patch

 drivers/spi/atmel-quadspi.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 19a3980775ad..336501d962e5 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -137,7 +137,7 @@
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
-	struct clk		*clk;
+	struct clk		*pclk;
 	struct platform_device	*pdev;
 	u32			pending;
 	u32			mr;
@@ -341,7 +341,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	src_rate = clk_get_rate(aq->clk);
+	src_rate = clk_get_rate(aq->pclk);
 	if (!src_rate)
 		return -EINVAL;
 
@@ -433,15 +433,18 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	}
 
 	/* Get the peripheral clock */
-	aq->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(aq->clk)) {
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
 		dev_err(&pdev->dev, "missing peripheral clock\n");
-		err = PTR_ERR(aq->clk);
+		err = PTR_ERR(aq->pclk);
 		goto exit;
 	}
 
 	/* Enable the peripheral clock */
-	err = clk_prepare_enable(aq->clk);
+	err = clk_prepare_enable(aq->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 		goto exit;
@@ -452,25 +455,25 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_clk;
+		goto disable_pclk;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(aq->clk);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
 exit:
 	spi_controller_put(ctrl);
 
@@ -484,7 +487,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
@@ -492,7 +495,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 
 	return 0;
 }
@@ -501,7 +504,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_prepare_enable(aq->clk);
+	clk_prepare_enable(aq->pclk);
 
 	return atmel_qspi_init(aq);
 }
-- 
2.9.5

WARNING: multiple messages have this Message-ID (diff)
From: <Tudor.Ambarus@microchip.com>
To: <broonie@kernel.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<Ludovic.Desroches@microchip.com>, <bbrezillon@kernel.org>,
	<Cyrille.Pitchen@microchip.com>, <bugalski.piotr@gmail.com>
Cc: devicetree@vger.kernel.org, Tudor.Ambarus@microchip.com,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 11/13] spi: atmel-quadspi: add support for named peripheral clock
Date: Mon, 4 Feb 2019 10:10:04 +0000	[thread overview]
Message-ID: <20190204100910.26701-12-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190204100910.26701-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Keep supporting unnamed
peripheral clock, to be backward compatible with old DTs.
While here, rename clk to pclk, to indicate that it is a
peripheral clock.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v4: collect R-b
v3: new patch

 drivers/spi/atmel-quadspi.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 19a3980775ad..336501d962e5 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -137,7 +137,7 @@
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
-	struct clk		*clk;
+	struct clk		*pclk;
 	struct platform_device	*pdev;
 	u32			pending;
 	u32			mr;
@@ -341,7 +341,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	src_rate = clk_get_rate(aq->clk);
+	src_rate = clk_get_rate(aq->pclk);
 	if (!src_rate)
 		return -EINVAL;
 
@@ -433,15 +433,18 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	}
 
 	/* Get the peripheral clock */
-	aq->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(aq->clk)) {
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
 		dev_err(&pdev->dev, "missing peripheral clock\n");
-		err = PTR_ERR(aq->clk);
+		err = PTR_ERR(aq->pclk);
 		goto exit;
 	}
 
 	/* Enable the peripheral clock */
-	err = clk_prepare_enable(aq->clk);
+	err = clk_prepare_enable(aq->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 		goto exit;
@@ -452,25 +455,25 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_clk;
+		goto disable_pclk;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(aq->clk);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
 exit:
 	spi_controller_put(ctrl);
 
@@ -484,7 +487,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
@@ -492,7 +495,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 
 	return 0;
 }
@@ -501,7 +504,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_prepare_enable(aq->clk);
+	clk_prepare_enable(aq->pclk);
 
 	return atmel_qspi_init(aq);
 }
-- 
2.9.5


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

WARNING: multiple messages have this Message-ID (diff)
From: <Tudor.Ambarus@microchip.com>
To: <broonie@kernel.org>, <robh+dt@kernel.org>,
	<mark.rutland@arm.com>, <Nicolas.Ferre@microchip.com>,
	<alexandre.belloni@bootlin.com>,
	<Ludovic.Desroches@microchip.com>, <bbrezillon@kernel.org>,
	<Cyrille.Pitchen@microchip.com>, <bugalski.piotr@gmail.com>
Cc: devicetree@vger.kernel.org, Tudor.Ambarus@microchip.com,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 11/13] spi: atmel-quadspi: add support for named peripheral clock
Date: Mon, 4 Feb 2019 10:10:04 +0000	[thread overview]
Message-ID: <20190204100910.26701-12-tudor.ambarus@microchip.com> (raw)
In-Reply-To: <20190204100910.26701-1-tudor.ambarus@microchip.com>

From: Tudor Ambarus <tudor.ambarus@microchip.com>

Naming clocks is a good practice. Keep supporting unnamed
peripheral clock, to be backward compatible with old DTs.
While here, rename clk to pclk, to indicate that it is a
peripheral clock.

Suggested-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Boris Brezillon <bbrezillon@kernel.org>
---
v4: collect R-b
v3: new patch

 drivers/spi/atmel-quadspi.c | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index 19a3980775ad..336501d962e5 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -137,7 +137,7 @@
 struct atmel_qspi {
 	void __iomem		*regs;
 	void __iomem		*mem;
-	struct clk		*clk;
+	struct clk		*pclk;
 	struct platform_device	*pdev;
 	u32			pending;
 	u32			mr;
@@ -341,7 +341,7 @@ static int atmel_qspi_setup(struct spi_device *spi)
 	if (!spi->max_speed_hz)
 		return -EINVAL;
 
-	src_rate = clk_get_rate(aq->clk);
+	src_rate = clk_get_rate(aq->pclk);
 	if (!src_rate)
 		return -EINVAL;
 
@@ -433,15 +433,18 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	}
 
 	/* Get the peripheral clock */
-	aq->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(aq->clk)) {
+	aq->pclk = devm_clk_get(&pdev->dev, "pclk");
+	if (IS_ERR(aq->pclk))
+		aq->pclk = devm_clk_get(&pdev->dev, NULL);
+
+	if (IS_ERR(aq->pclk)) {
 		dev_err(&pdev->dev, "missing peripheral clock\n");
-		err = PTR_ERR(aq->clk);
+		err = PTR_ERR(aq->pclk);
 		goto exit;
 	}
 
 	/* Enable the peripheral clock */
-	err = clk_prepare_enable(aq->clk);
+	err = clk_prepare_enable(aq->pclk);
 	if (err) {
 		dev_err(&pdev->dev, "failed to enable the peripheral clock\n");
 		goto exit;
@@ -452,25 +455,25 @@ static int atmel_qspi_probe(struct platform_device *pdev)
 	if (irq < 0) {
 		dev_err(&pdev->dev, "missing IRQ\n");
 		err = irq;
-		goto disable_clk;
+		goto disable_pclk;
 	}
 	err = devm_request_irq(&pdev->dev, irq, atmel_qspi_interrupt,
 			       0, dev_name(&pdev->dev), aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = atmel_qspi_init(aq);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	err = spi_register_controller(ctrl);
 	if (err)
-		goto disable_clk;
+		goto disable_pclk;
 
 	return 0;
 
-disable_clk:
-	clk_disable_unprepare(aq->clk);
+disable_pclk:
+	clk_disable_unprepare(aq->pclk);
 exit:
 	spi_controller_put(ctrl);
 
@@ -484,7 +487,7 @@ static int atmel_qspi_remove(struct platform_device *pdev)
 
 	spi_unregister_controller(ctrl);
 	writel_relaxed(QSPI_CR_QSPIDIS, aq->regs + QSPI_CR);
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 	return 0;
 }
 
@@ -492,7 +495,7 @@ static int __maybe_unused atmel_qspi_suspend(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_disable_unprepare(aq->clk);
+	clk_disable_unprepare(aq->pclk);
 
 	return 0;
 }
@@ -501,7 +504,7 @@ static int __maybe_unused atmel_qspi_resume(struct device *dev)
 {
 	struct atmel_qspi *aq = dev_get_drvdata(dev);
 
-	clk_prepare_enable(aq->clk);
+	clk_prepare_enable(aq->pclk);
 
 	return atmel_qspi_init(aq);
 }
-- 
2.9.5


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-04 10:10 UTC|newest]

Thread overview: 77+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-04 10:09 [PATCH v4 00/13] spi: atmel-quadspi: introduce sam9x60 qspi controller Tudor.Ambarus
2019-02-04 10:09 ` Tudor.Ambarus
2019-02-04 10:09 ` Tudor.Ambarus
2019-02-04 10:09 ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 01/13] spi: atmel-quadspi: cache MR value to avoid a write access Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 14:00   ` Boris Brezillon
2019-02-04 14:00     ` Boris Brezillon
2019-02-04 14:00     ` Boris Brezillon
2019-02-04 14:00     ` Boris Brezillon
2019-02-04 10:09 ` [PATCH v4 02/13] spi: atmel-quadspi: order header files inclusion alphabetically Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 03/13] spi: atmel-quadspi: drop wrappers for iomem accesses Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 04/13] spi: atmel-quadspi: fix naming scheme Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 05/13] spi: atmel-quadspi: remove unnecessary cast Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 06/13] spi: atmel-quadspi: return appropriate error code Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 07/13] spi: atmel-quadspi: switch to SPDX license identifiers Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09 ` [PATCH v4 08/13] spi: atmel-quadspi: rework transfer macros Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 14:01   ` Boris Brezillon
2019-02-04 14:01     ` Boris Brezillon
2019-02-04 14:01     ` Boris Brezillon
2019-02-04 14:01     ` Boris Brezillon
2019-02-04 10:09 ` [PATCH v4 09/13] dt-bindings: spi: atmel-quadspi: update example to new clock binding Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:09   ` Tudor.Ambarus
2019-02-04 10:10 ` [PATCH v4 10/13] dt-bindings: spi: atmel-quadspi: make "pclk" mandatory Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10 ` Tudor.Ambarus [this message]
2019-02-04 10:10   ` [PATCH v4 11/13] spi: atmel-quadspi: add support for named peripheral clock Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10 ` [PATCH v4 12/13] dt-bindings: spi: atmel-quadspi: QuadSPI driver for Microchip SAM9X60 Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10 ` [PATCH v4 13/13] spi: atmel-quadspi: add support for sam9x60 qspi controller Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 10:10   ` Tudor.Ambarus
2019-02-04 14:16   ` Boris Brezillon
2019-02-04 14:16     ` Boris Brezillon
2019-02-04 14:16     ` Boris Brezillon
2019-02-04 14:16     ` Boris Brezillon
2019-02-04 14:16     ` Boris Brezillon
2019-02-04 14:28     ` Tudor.Ambarus
2019-02-04 14:28       ` Tudor.Ambarus
2019-02-04 14:28       ` Tudor.Ambarus
2019-02-04 14:28       ` Tudor.Ambarus
2019-02-04 14:37       ` Boris Brezillon
2019-02-04 14:37         ` Boris Brezillon
2019-02-04 14:37         ` Boris Brezillon
2019-02-04 14:37         ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190204100910.26701-12-tudor.ambarus@microchip.com \
    --to=tudor.ambarus@microchip.com \
    --cc=Cyrille.Pitchen@microchip.com \
    --cc=Ludovic.Desroches@microchip.com \
    --cc=Nicolas.Ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bbrezillon@kernel.org \
    --cc=broonie@kernel.org \
    --cc=bugalski.piotr@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.