All of lore.kernel.org
 help / color / mirror / Atom feed
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>
Cc: devicetree@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 26/30 v2] soc: ixp4xx: Add DT bindings for IXP4xx NPE
Date: Thu, 21 Feb 2019 16:44:54 +0100	[thread overview]
Message-ID: <20190221154458.23763-27-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190221154458.23763-1-linus.walleij@linaro.org>

This adds DT bindings for the Intel IXP4xx Network Processing
Engine (NPE). These are three firmware-executing units found in
the IXP4xx SoC. These bindings use YAML.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 ...ntel,ixp4xx-network-processing-engine.yaml | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
new file mode 100644
index 000000000000..8cb136c376fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+  processor that can load a firmware to perform offloading of networking
+  and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+  on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+  consecutive memory locations. They are all included in the same
+  device node since they are not independent of each other.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: intel,ixp4xx-network-processing-engine
+
+  reg:
+    minItems: 3
+    maxItems: 3
+    items:
+      - description: NPE0 register range
+      - description: NPE1 register range
+      - description: NPE2 register range
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };
-- 
2.20.1

WARNING: multiple messages have this Message-ID (diff)
From: Linus Walleij <linus.walleij@linaro.org>
To: linux-arm-kernel@lists.infradead.org,
	Imre Kaloz <kaloz@openwrt.org>,
	Krzysztof Halasa <khalasa@piap.pl>
Cc: devicetree@vger.kernel.org, Linus Walleij <linus.walleij@linaro.org>
Subject: [PATCH 26/30 v2] soc: ixp4xx: Add DT bindings for IXP4xx NPE
Date: Thu, 21 Feb 2019 16:44:54 +0100	[thread overview]
Message-ID: <20190221154458.23763-27-linus.walleij@linaro.org> (raw)
In-Reply-To: <20190221154458.23763-1-linus.walleij@linaro.org>

This adds DT bindings for the Intel IXP4xx Network Processing
Engine (NPE). These are three firmware-executing units found in
the IXP4xx SoC. These bindings use YAML.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 ...ntel,ixp4xx-network-processing-engine.yaml | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml

diff --git a/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
new file mode 100644
index 000000000000..8cb136c376fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/intel,ixp4xx-network-processing-engine.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/firmware/intel-ixp4xx-network-processing-engine.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel IXP4xx Network Processing Engine
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  On the IXP4xx SoCs, the Network Processing Engine (NPE) is a small
+  processor that can load a firmware to perform offloading of networking
+  and crypto tasks. It also manages the MDIO bus to the ethernet PHYs
+  on the IXP4xx platform. All IXP4xx platforms have three NPEs at
+  consecutive memory locations. They are all included in the same
+  device node since they are not independent of each other.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: intel,ixp4xx-network-processing-engine
+
+  reg:
+    minItems: 3
+    maxItems: 3
+    items:
+      - description: NPE0 register range
+      - description: NPE1 register range
+      - description: NPE2 register range
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    npe@c8006000 {
+         compatible = "intel,ixp4xx-network-processing-engine";
+         reg = <0xc8006000 0x1000>, <0xc8007000 0x1000>, <0xc8008000 0x1000>;
+    };
-- 
2.20.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-02-21 15:44 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-02-21 15:44 [PATCH 00/30 v2] ARM: ixp4xx: Modernize and DT support Linus Walleij
2019-02-21 15:44 ` [PATCH 01/30 v2] ARM: ixp4xx: Convert to MULTI_IRQ_HANDLER Linus Walleij
2019-02-21 15:44 ` [PATCH 02/30 v2] ARM: ixp4xx: Pass IRQ resource to beeper Linus Walleij
2019-02-21 15:44 ` [PATCH 03/30 v2] ARM: ixp4xx: Convert to SPARSE_IRQ Linus Walleij
2019-02-21 15:44 ` [PATCH 04/30 v2] irqchip: Add driver for IXP4xx Linus Walleij
2019-02-22  9:51   ` Marc Zyngier
2019-02-21 15:44 ` [PATCH 05/30 v2] gpio: ixp4xx: Add driver for the IXP4xx GPIO Linus Walleij
2019-02-21 15:44 ` [PATCH 06/30 v2] ARM: ixp4xx: Switch to use new IRQ+GPIO drivers Linus Walleij
2019-02-22  9:51   ` Marc Zyngier
2019-02-21 15:44 ` [PATCH 07/30 v2] clocksource/drivers/ixp4xx: Add driver Linus Walleij
2019-02-21 20:54   ` Daniel Lezcano
2019-03-03  9:35     ` Linus Walleij
2019-02-21 15:44 ` [PATCH 08/30 v2] ARM: ixp4xx: Switch to use new timer driver Linus Walleij
2019-02-22  8:38   ` Daniel Lezcano
2019-02-21 15:44 ` [PATCH 09/30 v2] irqchip: ixp4xx: Add DT bindings Linus Walleij
2019-02-21 15:44   ` Linus Walleij
2019-02-21 21:39   ` Rob Herring
2019-02-21 21:39     ` Rob Herring
2019-02-21 15:44 ` [PATCH 10/30 v2] irqchip: ixp4xx: Add OF initialization support Linus Walleij
2019-02-22  9:53   ` Marc Zyngier
2019-02-21 15:44 ` [PATCH 11/30 v2] clocksource/drivers/ixp4xx: Add DT bindings Linus Walleij
2019-02-21 15:44   ` Linus Walleij
2019-02-21 21:40   ` Rob Herring
2019-02-21 21:40     ` Rob Herring
2019-02-21 15:44 ` [PATCH 12/30 v2] clocksource/drivers/ixp4xx: Add OF initialization support Linus Walleij
2019-02-21 15:44 ` [PATCH 13/30 v2] gpio: ixp4xx: Add DT bindings Linus Walleij
2019-02-21 15:44   ` Linus Walleij
2019-02-21 15:44 ` [PATCH 14/30 v2] gpio: ixp4xx: Add OF probing support Linus Walleij
2019-02-21 15:44 ` [PATCH 15/30 v2] ARM: ixp4xx: Add DT bindings Linus Walleij
2019-02-21 15:44   ` Linus Walleij
2019-02-21 15:44 ` [PATCH 16/30 v2] ARM: ixp4xx: Add device tree boot support Linus Walleij
2019-02-21 15:44 ` [PATCH 17/30 v2] ARM: dts: Add some initial IXP4xx device trees Linus Walleij
2019-02-21 15:44 ` [PATCH 18/30 v2] ARM: ixp4xx: Move NPE and QMGR to drivers/soc Linus Walleij
2019-02-21 15:44 ` [PATCH 19/30 v2] ARM: ixp4xx: Move IXP4xx QMGR and NPE headers Linus Walleij
2019-02-21 15:44 ` [PATCH 20/30 v2] ARM: ixp4xx: Turn the NPE into a platform device Linus Walleij
2019-02-21 15:44 ` [PATCH 21/30 v2] ARM: ixp4xx: Turn the QMGR " Linus Walleij
2019-02-21 15:44 ` [PATCH 22/30 v2] soc: ixp4xx: npe: Pass addresses as resources Linus Walleij
2019-02-21 15:44 ` [PATCH 23/30 v2] soc: ixp4xx: Uninline several functions Linus Walleij
2019-02-21 15:44 ` [PATCH 24/30 v2] soc: ixp4xx: Remove unused functions Linus Walleij
2019-02-21 15:44 ` [PATCH 25/30 v2] soc: ixp4xx: qmgr: Pass resources Linus Walleij
2019-02-21 15:44 ` Linus Walleij [this message]
2019-02-21 15:44   ` [PATCH 26/30 v2] soc: ixp4xx: Add DT bindings for IXP4xx NPE Linus Walleij
2019-02-21 21:48   ` Rob Herring
2019-02-21 21:48     ` Rob Herring
2019-02-22 10:37     ` Linus Walleij
2019-02-22 10:37       ` Linus Walleij
2019-02-21 15:44 ` [PATCH 27/30 v2] soc: ixp4xx: npe: Add DT probe code Linus Walleij
2019-02-21 15:44 ` [PATCH 28/30 v2] soc: ixp4xx: qmgr: Add DT bindings for IXP4xx qmgr Linus Walleij
2019-02-21 15:44   ` Linus Walleij
2019-02-21 22:00   ` Rob Herring
2019-02-21 22:00     ` Rob Herring
2019-02-21 15:44 ` [PATCH 29/30 v2] soc: ixp4xx: qmgr: Add DT probe code Linus Walleij
2019-02-21 15:44 ` [PATCH 30/30 v2] ARM: dts: Add queue manager and NPE to the IXP4xx DTSI Linus Walleij
2019-03-18  7:16 ` [PATCH 00/30 v2] ARM: ixp4xx: Modernize and DT support Krzysztof Hałasa
2019-03-18 22:16   ` Linus Walleij
2019-04-02 12:12     ` Krzysztof Hałasa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190221154458.23763-27-linus.walleij@linaro.org \
    --to=linus.walleij@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kaloz@openwrt.org \
    --cc=khalasa@piap.pl \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.