From: "Jernej Škrabec" <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: vkoul@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
dan.j.williams@intel.com, dmaengine@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
jernej.skrabec@siol.net
Subject: [6/6] arm64: dts: allwinner: h6: Add DMA node
Date: Thu, 7 Mar 2019 17:58:29 +0100 [thread overview]
Message-ID: <20190307165829.9086-7-jernej.skrabec@siol.net> (raw)
H6 has DMA controller which supports 16 channels.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c9e861a50a63..ff8cf6e3b6ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -192,6 +192,18 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
WARNING: multiple messages have this Message-ID (diff)
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: vkoul@kernel.org, robh+dt@kernel.org, mark.rutland@arm.com,
dan.j.williams@intel.com, dmaengine@vger.kernel.org,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-sunxi@googlegroups.com,
jernej.skrabec@siol.net
Subject: [PATCH 6/6] arm64: dts: allwinner: h6: Add DMA node
Date: Thu, 7 Mar 2019 17:58:29 +0100 [thread overview]
Message-ID: <20190307165829.9086-7-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20190307165829.9086-1-jernej.skrabec@siol.net>
H6 has DMA controller which supports 16 channels.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c9e861a50a63..ff8cf6e3b6ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -192,6 +192,18 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
To: maxime.ripard-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org,
wens-jdAy2FN1RRM@public.gmane.org
Cc: vkoul-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
dan.j.williams-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org,
dmaengine-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
jernej.skrabec-gGgVlfcn5nU@public.gmane.org
Subject: [PATCH 6/6] arm64: dts: allwinner: h6: Add DMA node
Date: Thu, 7 Mar 2019 17:58:29 +0100 [thread overview]
Message-ID: <20190307165829.9086-7-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20190307165829.9086-1-jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
H6 has DMA controller which supports 16 channels.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec-gGgVlfcn5nU@public.gmane.org>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c9e861a50a63..ff8cf6e3b6ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -192,6 +192,18 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
--
2.21.0
WARNING: multiple messages have this Message-ID (diff)
From: Jernej Skrabec <jernej.skrabec@siol.net>
To: maxime.ripard@bootlin.com, wens@csie.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
jernej.skrabec@siol.net, linux-sunxi@googlegroups.com,
linux-kernel@vger.kernel.org, vkoul@kernel.org,
robh+dt@kernel.org, dmaengine@vger.kernel.org,
dan.j.williams@intel.com, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] arm64: dts: allwinner: h6: Add DMA node
Date: Thu, 7 Mar 2019 17:58:29 +0100 [thread overview]
Message-ID: <20190307165829.9086-7-jernej.skrabec@siol.net> (raw)
In-Reply-To: <20190307165829.9086-1-jernej.skrabec@siol.net>
H6 has DMA controller which supports 16 channels.
Add a node for it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
---
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
index c9e861a50a63..ff8cf6e3b6ec 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
@@ -192,6 +192,18 @@
#reset-cells = <1>;
};
+ dma: dma-controller@3002000 {
+ compatible = "allwinner,sun50i-h6-dma";
+ reg = <0x03002000 0x1000>;
+ interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+ clock-names = "bus", "mbus";
+ dma-channels = <16>;
+ dma-requests = <46>;
+ resets = <&ccu RST_BUS_DMA>;
+ #dma-cells = <1>;
+ };
+
pio: pinctrl@300b000 {
compatible = "allwinner,sun50i-h6-pinctrl";
reg = <0x0300b000 0x400>;
--
2.21.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-03-07 16:58 UTC|newest]
Thread overview: 64+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-03-07 16:58 Jernej Škrabec [this message]
2019-03-07 16:58 ` [PATCH 6/6] arm64: dts: allwinner: h6: Add DMA node Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
-- strict thread matches above, loose matches on Subject: below --
2019-03-27 23:47 [1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller Rob Herring
2019-03-27 23:47 ` [PATCH 1/6] " Rob Herring
2019-03-27 23:47 ` Rob Herring
2019-03-27 23:47 ` Rob Herring
2019-03-22 13:03 [2/6] dmaengine: sun6i: Add a quirk for additional mbus clock Maxime Ripard
2019-03-22 13:03 ` [PATCH 2/6] " Maxime Ripard
2019-03-22 13:03 ` Maxime Ripard
2019-03-22 12:59 [2/6] " Vinod Koul
2019-03-22 12:59 ` [PATCH 2/6] " Vinod Koul
2019-03-22 12:59 ` Vinod Koul
2019-03-16 11:37 [5/6] dmaengine: sun6i: Add support for H6 DMA Jernej Škrabec
2019-03-16 11:37 ` [PATCH 5/6] " Jernej Škrabec
2019-03-16 11:37 ` Jernej Škrabec
2019-03-16 11:37 ` Jernej Škrabec
2019-03-16 11:27 [1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller Jernej Škrabec
2019-03-16 11:27 ` [PATCH 1/6] " Jernej Škrabec
2019-03-16 11:27 ` Jernej Škrabec
2019-03-16 11:27 ` Jernej Škrabec
2019-03-16 11:23 [2/6] dmaengine: sun6i: Add a quirk for additional mbus clock Jernej Škrabec
2019-03-16 11:23 ` [PATCH 2/6] " Jernej Škrabec
2019-03-16 11:23 ` Jernej Škrabec
2019-03-16 11:23 ` Jernej Škrabec
2019-03-16 11:13 [5/6] dmaengine: sun6i: Add support for H6 DMA Vinod Koul
2019-03-16 11:13 ` [PATCH 5/6] " Vinod Koul
2019-03-16 11:13 ` Vinod Koul
2019-03-16 11:13 ` Vinod Koul
2019-03-16 11:07 [2/6] dmaengine: sun6i: Add a quirk for additional mbus clock Vinod Koul
2019-03-16 11:07 ` [PATCH 2/6] " Vinod Koul
2019-03-16 11:07 ` Vinod Koul
2019-03-16 11:07 ` Vinod Koul
2019-03-16 10:57 [1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller Vinod Koul
2019-03-16 10:57 ` [PATCH 1/6] " Vinod Koul
2019-03-16 10:57 ` Vinod Koul
2019-03-16 10:57 ` Vinod Koul
2019-03-11 5:47 [2/6] dmaengine: sun6i: Add a quirk for additional mbus clock Chen-Yu Tsai
2019-03-11 5:47 ` [PATCH 2/6] " Chen-Yu Tsai
2019-03-11 5:47 ` Chen-Yu Tsai
2019-03-07 16:58 [5/6] dmaengine: sun6i: Add support for H6 DMA Jernej Škrabec
2019-03-07 16:58 ` [PATCH 5/6] " Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 [4/6] dmaengine: sun6i: Add a quirk for setting mode fields Jernej Škrabec
2019-03-07 16:58 ` [PATCH 4/6] " Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 [3/6] dmaengine: sun6i: Add a quirk for setting DRQ fields Jernej Škrabec
2019-03-07 16:58 ` [PATCH 3/6] " Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 [2/6] dmaengine: sun6i: Add a quirk for additional mbus clock Jernej Škrabec
2019-03-07 16:58 ` [PATCH 2/6] " Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 [1/6] dt-bindings: arm64: allwinner: h6: Add binding for DMA controller Jernej Škrabec
2019-03-07 16:58 ` [PATCH 1/6] " Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 [PATCH 0/6] Allwinner H6 DMA support Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
2019-03-07 16:58 ` Jernej Skrabec
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190307165829.9086-7-jernej.skrabec@siol.net \
--to=jernej.skrabec@siol.net \
--cc=dan.j.williams@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dmaengine@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mark.rutland@arm.com \
--cc=maxime.ripard@bootlin.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.