All of lore.kernel.org
 help / color / mirror / Atom feed
From: Arnd Bergmann <arnd@arndb.de>
To: soc@kernel.org
Cc: Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	linux-serial@vger.kernel.org
Subject: [PATCH v2 11/13] serial: lpc32xx: allow compile testing
Date: Fri,  9 Aug 2019 16:40:37 +0200	[thread overview]
Message-ID: <20190809144043.476786-12-arnd@arndb.de> (raw)
In-Reply-To: <20190809144043.476786-1-arnd@arndb.de>

The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the
one thing that relies on platform header files. Move that into the
core platform code so we only need a variable declaration for it,
and enable COMPILE_TEST building.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-lpc32xx/serial.c       | 30 ++++++++++++++++++++++++
 drivers/tty/serial/lpc32xx_hs.c      | 35 ++++------------------------
 include/linux/soc/nxp/lpc32xx-misc.h |  4 ++++
 3 files changed, 38 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3f9b30df9f0e..cfb35e5691cd 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -60,6 +60,36 @@ static struct uartinit uartinit_data[] __initdata = {
 	},
 };
 
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+	int bit;
+	u32 tmp;
+
+	switch (mapbase) {
+	case LPC32XX_HS_UART1_BASE:
+		bit = 0;
+		break;
+	case LPC32XX_HS_UART2_BASE:
+		bit = 1;
+		break;
+	case LPC32XX_HS_UART7_BASE:
+		bit = 6;
+		break;
+	default:
+		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+		return;
+	}
+
+	tmp = readl(LPC32XX_UARTCTL_CLOOP);
+	if (state)
+		tmp |= (1 << bit);
+	else
+		tmp &= ~(1 << bit);
+	writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
 void __init lpc32xx_serial_init(void)
 {
 	u32 tmp, clkmodes = 0;
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 7f14cd8fac47..d3843f722182 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -25,6 +25,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/sizes.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 /*
  * High Speed UART register offsets
@@ -79,6 +81,8 @@
 #define LPC32XX_HSU_TX_TL8B			(0x2 << 0)
 #define LPC32XX_HSU_TX_TL16B			(0x3 << 0)
 
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+
 #define MODNAME "lpc32xx_hsuart"
 
 struct lpc32xx_hsuart_port {
@@ -149,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
-
 static int __init lpc32xx_hsuart_console_setup(struct console *co,
 					       char *options)
 {
@@ -437,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
-{
-	int bit;
-	u32 tmp;
-
-	switch (mapbase) {
-	case LPC32XX_HS_UART1_BASE:
-		bit = 0;
-		break;
-	case LPC32XX_HS_UART2_BASE:
-		bit = 1;
-		break;
-	case LPC32XX_HS_UART7_BASE:
-		bit = 6;
-		break;
-	default:
-		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
-		return;
-	}
-
-	tmp = readl(LPC32XX_UARTCTL_CLOOP);
-	if (state)
-		tmp |= (1 << bit);
-	else
-		tmp &= ~(1 << bit);
-	writel(tmp, LPC32XX_UARTCTL_CLOOP);
-}
-
 /* port->lock is not held.  */
 static int serial_lpc32xx_startup(struct uart_port *port)
 {
diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h
index af4f82f6cf3b..699c6f1e3aab 100644
--- a/include/linux/soc/nxp/lpc32xx-misc.h
+++ b/include/linux/soc/nxp/lpc32xx-misc.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_ARCH_LPC32XX
 extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
 extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
+extern void lpc32xx_loopback_set(resource_size_t mapbase, int state);
 #else
 static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
 {
@@ -24,6 +25,9 @@ static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaadd
 static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
 {
 }
+static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+}
 #endif
 
 #endif  /* __SOC_LPC32XX_MISC_H */
-- 
2.20.0


WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: soc@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	linux-kernel@vger.kernel.org, Vladimir Zapolskiy <vz@mleia.com>,
	linux-serial@vger.kernel.org,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/13] serial: lpc32xx: allow compile testing
Date: Fri,  9 Aug 2019 16:40:37 +0200	[thread overview]
Message-ID: <20190809144043.476786-12-arnd@arndb.de> (raw)
In-Reply-To: <20190809144043.476786-1-arnd@arndb.de>

The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the
one thing that relies on platform header files. Move that into the
core platform code so we only need a variable declaration for it,
and enable COMPILE_TEST building.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-lpc32xx/serial.c       | 30 ++++++++++++++++++++++++
 drivers/tty/serial/lpc32xx_hs.c      | 35 ++++------------------------
 include/linux/soc/nxp/lpc32xx-misc.h |  4 ++++
 3 files changed, 38 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3f9b30df9f0e..cfb35e5691cd 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -60,6 +60,36 @@ static struct uartinit uartinit_data[] __initdata = {
 	},
 };
 
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+	int bit;
+	u32 tmp;
+
+	switch (mapbase) {
+	case LPC32XX_HS_UART1_BASE:
+		bit = 0;
+		break;
+	case LPC32XX_HS_UART2_BASE:
+		bit = 1;
+		break;
+	case LPC32XX_HS_UART7_BASE:
+		bit = 6;
+		break;
+	default:
+		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+		return;
+	}
+
+	tmp = readl(LPC32XX_UARTCTL_CLOOP);
+	if (state)
+		tmp |= (1 << bit);
+	else
+		tmp &= ~(1 << bit);
+	writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
 void __init lpc32xx_serial_init(void)
 {
 	u32 tmp, clkmodes = 0;
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 7f14cd8fac47..d3843f722182 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -25,6 +25,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/sizes.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 /*
  * High Speed UART register offsets
@@ -79,6 +81,8 @@
 #define LPC32XX_HSU_TX_TL8B			(0x2 << 0)
 #define LPC32XX_HSU_TX_TL16B			(0x3 << 0)
 
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+
 #define MODNAME "lpc32xx_hsuart"
 
 struct lpc32xx_hsuart_port {
@@ -149,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
-
 static int __init lpc32xx_hsuart_console_setup(struct console *co,
 					       char *options)
 {
@@ -437,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
-{
-	int bit;
-	u32 tmp;
-
-	switch (mapbase) {
-	case LPC32XX_HS_UART1_BASE:
-		bit = 0;
-		break;
-	case LPC32XX_HS_UART2_BASE:
-		bit = 1;
-		break;
-	case LPC32XX_HS_UART7_BASE:
-		bit = 6;
-		break;
-	default:
-		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
-		return;
-	}
-
-	tmp = readl(LPC32XX_UARTCTL_CLOOP);
-	if (state)
-		tmp |= (1 << bit);
-	else
-		tmp &= ~(1 << bit);
-	writel(tmp, LPC32XX_UARTCTL_CLOOP);
-}
-
 /* port->lock is not held.  */
 static int serial_lpc32xx_startup(struct uart_port *port)
 {
diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h
index af4f82f6cf3b..699c6f1e3aab 100644
--- a/include/linux/soc/nxp/lpc32xx-misc.h
+++ b/include/linux/soc/nxp/lpc32xx-misc.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_ARCH_LPC32XX
 extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
 extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
+extern void lpc32xx_loopback_set(resource_size_t mapbase, int state);
 #else
 static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
 {
@@ -24,6 +25,9 @@ static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaadd
 static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
 {
 }
+static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+}
 #endif
 
 #endif  /* __SOC_LPC32XX_MISC_H */
-- 
2.20.0

WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@arndb.de>
To: soc@kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Jiri Slaby <jslaby@suse.com>,
	linux-kernel@vger.kernel.org, Vladimir Zapolskiy <vz@mleia.com>,
	linux-serial@vger.kernel.org,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 11/13] serial: lpc32xx: allow compile testing
Date: Fri,  9 Aug 2019 16:40:37 +0200	[thread overview]
Message-ID: <20190809144043.476786-12-arnd@arndb.de> (raw)
In-Reply-To: <20190809144043.476786-1-arnd@arndb.de>

The lpc32xx_loopback_set() function in hte lpc32xx_hs driver is the
one thing that relies on platform header files. Move that into the
core platform code so we only need a variable declaration for it,
and enable COMPILE_TEST building.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm/mach-lpc32xx/serial.c       | 30 ++++++++++++++++++++++++
 drivers/tty/serial/lpc32xx_hs.c      | 35 ++++------------------------
 include/linux/soc/nxp/lpc32xx-misc.h |  4 ++++
 3 files changed, 38 insertions(+), 31 deletions(-)

diff --git a/arch/arm/mach-lpc32xx/serial.c b/arch/arm/mach-lpc32xx/serial.c
index 3f9b30df9f0e..cfb35e5691cd 100644
--- a/arch/arm/mach-lpc32xx/serial.c
+++ b/arch/arm/mach-lpc32xx/serial.c
@@ -60,6 +60,36 @@ static struct uartinit uartinit_data[] __initdata = {
 	},
 };
 
+/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
+void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+	int bit;
+	u32 tmp;
+
+	switch (mapbase) {
+	case LPC32XX_HS_UART1_BASE:
+		bit = 0;
+		break;
+	case LPC32XX_HS_UART2_BASE:
+		bit = 1;
+		break;
+	case LPC32XX_HS_UART7_BASE:
+		bit = 6;
+		break;
+	default:
+		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
+		return;
+	}
+
+	tmp = readl(LPC32XX_UARTCTL_CLOOP);
+	if (state)
+		tmp |= (1 << bit);
+	else
+		tmp &= ~(1 << bit);
+	writel(tmp, LPC32XX_UARTCTL_CLOOP);
+}
+EXPORT_SYMBOL_GPL(lpc32xx_loopback_set);
+
 void __init lpc32xx_serial_init(void)
 {
 	u32 tmp, clkmodes = 0;
diff --git a/drivers/tty/serial/lpc32xx_hs.c b/drivers/tty/serial/lpc32xx_hs.c
index 7f14cd8fac47..d3843f722182 100644
--- a/drivers/tty/serial/lpc32xx_hs.c
+++ b/drivers/tty/serial/lpc32xx_hs.c
@@ -25,6 +25,8 @@
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/of.h>
+#include <linux/sizes.h>
+#include <linux/soc/nxp/lpc32xx-misc.h>
 
 /*
  * High Speed UART register offsets
@@ -79,6 +81,8 @@
 #define LPC32XX_HSU_TX_TL8B			(0x2 << 0)
 #define LPC32XX_HSU_TX_TL16B			(0x3 << 0)
 
+#define LPC32XX_MAIN_OSC_FREQ			13000000
+
 #define MODNAME "lpc32xx_hsuart"
 
 struct lpc32xx_hsuart_port {
@@ -149,8 +153,6 @@ static void lpc32xx_hsuart_console_write(struct console *co, const char *s,
 	local_irq_restore(flags);
 }
 
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state);
-
 static int __init lpc32xx_hsuart_console_setup(struct console *co,
 					       char *options)
 {
@@ -437,35 +439,6 @@ static void serial_lpc32xx_break_ctl(struct uart_port *port,
 	spin_unlock_irqrestore(&port->lock, flags);
 }
 
-/* LPC3250 Errata HSUART.1: Hang workaround via loopback mode on inactivity */
-static void lpc32xx_loopback_set(resource_size_t mapbase, int state)
-{
-	int bit;
-	u32 tmp;
-
-	switch (mapbase) {
-	case LPC32XX_HS_UART1_BASE:
-		bit = 0;
-		break;
-	case LPC32XX_HS_UART2_BASE:
-		bit = 1;
-		break;
-	case LPC32XX_HS_UART7_BASE:
-		bit = 6;
-		break;
-	default:
-		WARN(1, "lpc32xx_hs: Warning: Unknown port at %08x\n", mapbase);
-		return;
-	}
-
-	tmp = readl(LPC32XX_UARTCTL_CLOOP);
-	if (state)
-		tmp |= (1 << bit);
-	else
-		tmp &= ~(1 << bit);
-	writel(tmp, LPC32XX_UARTCTL_CLOOP);
-}
-
 /* port->lock is not held.  */
 static int serial_lpc32xx_startup(struct uart_port *port)
 {
diff --git a/include/linux/soc/nxp/lpc32xx-misc.h b/include/linux/soc/nxp/lpc32xx-misc.h
index af4f82f6cf3b..699c6f1e3aab 100644
--- a/include/linux/soc/nxp/lpc32xx-misc.h
+++ b/include/linux/soc/nxp/lpc32xx-misc.h
@@ -14,6 +14,7 @@
 #ifdef CONFIG_ARCH_LPC32XX
 extern u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr);
 extern void lpc32xx_set_phy_interface_mode(phy_interface_t mode);
+extern void lpc32xx_loopback_set(resource_size_t mapbase, int state);
 #else
 static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaaddr)
 {
@@ -24,6 +25,9 @@ static inline u32 lpc32xx_return_iram(void __iomem **mapbase, dma_addr_t *dmaadd
 static inline void lpc32xx_set_phy_interface_mode(phy_interface_t mode)
 {
 }
+static inline void lpc32xx_loopback_set(resource_size_t mapbase, int state)
+{
+}
 #endif
 
 #endif  /* __SOC_LPC32XX_MISC_H */
-- 
2.20.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2019-08-09 14:46 UTC|newest]

Thread overview: 41+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-09 14:40 [PATCH v2 00/13] v2: ARM: move lpc32xx to multiplatform Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 01/13] usb: ohci-nxp: enable compile-testing Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-15 12:42   ` Greg Kroah-Hartman
2019-08-15 12:42     ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 02/13] usb: udc: lpc32xx: allow compile-testing Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 03/13] watchdog: pnx4008_wdt: " Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 04/13] serial: lpc32xx_hs: " Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 05/13] gpio: lpc32xx: allow building on non-lpc32xx targets Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-12  7:09   ` Bartosz Golaszewski
2019-08-12  7:09     ` Bartosz Golaszewski
2019-08-09 14:40 ` [PATCH v2 06/13] net: lpc-enet: factor out iram access Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 07/13] net: lpc-enet: move phy setup into platform code Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 08/13] net: lpc-enet: fix badzero.cocci warnings Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 09/13] net: lpc-enet: fix printk format strings Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 16:30   ` Joe Perches
2019-08-09 16:30     ` Joe Perches
2019-08-09 18:20     ` Arnd Bergmann
2019-08-09 18:20       ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 10/13] net: lpc-enet: allow compile testing Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` Arnd Bergmann [this message]
2019-08-09 14:40   ` [PATCH v2 11/13] serial: lpc32xx: " Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-15 13:40   ` Greg Kroah-Hartman
2019-08-15 13:40     ` Greg Kroah-Hartman
2019-08-09 14:40 ` [PATCH v2 12/13] ARM: lpc32xx: clean up header files Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann
2019-08-09 14:40 ` [PATCH v2 13/13] ARM: lpc32xx: allow multiplatform build Arnd Bergmann
2019-08-09 14:40   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190809144043.476786-12-arnd@arndb.de \
    --to=arnd@arndb.de \
    --cc=gregkh@linuxfoundation.org \
    --cc=jslaby@suse.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-serial@vger.kernel.org \
    --cc=slemieux.tyco@gmail.com \
    --cc=soc@kernel.org \
    --cc=vz@mleia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.