All of lore.kernel.org
 help / color / mirror / Atom feed
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	linux-usb@vger.kernel.org, linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Kevin Hilman <khilman@baylibre.com>
Subject: [PATCH] usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
Date: Wed, 21 Aug 2019 15:35:18 +0200	[thread overview]
Message-ID: <20190821133518.9671-1-narmstrong@baylibre.com> (raw)

When going in suspend, in Device mode, then resuming back leads
to the following:

unbalanced disables for USB_PWR_EN
WARNING: CPU: 0 PID: 163 at ../drivers/regulator/core.c:2590 _regulator_disable+0x104/0x180
Hardware name: Amlogic Meson G12A U200 Development Board (DT)
[...]
pc : _regulator_disable+0x104/0x180
lr : _regulator_disable+0x104/0x180
[...]
Call trace:
 _regulator_disable+0x104/0x180
 regulator_disable+0x40/0x78
 dwc3_meson_g12a_otg_mode_set+0x84/0xb0
 dwc3_meson_g12a_irq_thread+0x58/0xb8
 irq_thread_fn+0x28/0x80
 irq_thread+0x118/0x1b8
 kthread+0xf4/0x120
 ret_from_fork+0x10/0x18

This disables the regulator if enabled on suspend, and the reverse on
resume.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bca7e92a10e9..12dda04b004d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -564,7 +564,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
-	int i;
+	int i, ret;
+
+	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+		ret = regulator_disable(priv->vbus);
+		if (ret)
+			return ret;
+	}
 
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		phy_power_off(priv->phys[i]);
@@ -599,6 +605,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
 			return ret;
 	}
 
+       if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+               ret = regulator_enable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.22.0


WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
Date: Wed, 21 Aug 2019 15:35:18 +0200	[thread overview]
Message-ID: <20190821133518.9671-1-narmstrong@baylibre.com> (raw)

When going in suspend, in Device mode, then resuming back leads
to the following:

unbalanced disables for USB_PWR_EN
WARNING: CPU: 0 PID: 163 at ../drivers/regulator/core.c:2590 _regulator_disable+0x104/0x180
Hardware name: Amlogic Meson G12A U200 Development Board (DT)
[...]
pc : _regulator_disable+0x104/0x180
lr : _regulator_disable+0x104/0x180
[...]
Call trace:
 _regulator_disable+0x104/0x180
 regulator_disable+0x40/0x78
 dwc3_meson_g12a_otg_mode_set+0x84/0xb0
 dwc3_meson_g12a_irq_thread+0x58/0xb8
 irq_thread_fn+0x28/0x80
 irq_thread+0x118/0x1b8
 kthread+0xf4/0x120
 ret_from_fork+0x10/0x18

This disables the regulator if enabled on suspend, and the reverse on
resume.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bca7e92a10e9..12dda04b004d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -564,7 +564,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
-	int i;
+	int i, ret;
+
+	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+		ret = regulator_disable(priv->vbus);
+		if (ret)
+			return ret;
+	}
 
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		phy_power_off(priv->phys[i]);
@@ -599,6 +605,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
 			return ret;
 	}
 
+       if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+               ret = regulator_enable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.22.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Neil Armstrong <narmstrong@baylibre.com>
To: balbi@kernel.org
Cc: Neil Armstrong <narmstrong@baylibre.com>,
	Kevin Hilman <khilman@baylibre.com>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-amlogic@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables
Date: Wed, 21 Aug 2019 15:35:18 +0200	[thread overview]
Message-ID: <20190821133518.9671-1-narmstrong@baylibre.com> (raw)

When going in suspend, in Device mode, then resuming back leads
to the following:

unbalanced disables for USB_PWR_EN
WARNING: CPU: 0 PID: 163 at ../drivers/regulator/core.c:2590 _regulator_disable+0x104/0x180
Hardware name: Amlogic Meson G12A U200 Development Board (DT)
[...]
pc : _regulator_disable+0x104/0x180
lr : _regulator_disable+0x104/0x180
[...]
Call trace:
 _regulator_disable+0x104/0x180
 regulator_disable+0x40/0x78
 dwc3_meson_g12a_otg_mode_set+0x84/0xb0
 dwc3_meson_g12a_irq_thread+0x58/0xb8
 irq_thread_fn+0x28/0x80
 irq_thread+0x118/0x1b8
 kthread+0xf4/0x120
 ret_from_fork+0x10/0x18

This disables the regulator if enabled on suspend, and the reverse on
resume.

Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue")
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 drivers/usb/dwc3/dwc3-meson-g12a.c | 14 +++++++++++++-
 1 file changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
index bca7e92a10e9..12dda04b004d 100644
--- a/drivers/usb/dwc3/dwc3-meson-g12a.c
+++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
@@ -564,7 +564,13 @@ static int __maybe_unused dwc3_meson_g12a_runtime_resume(struct device *dev)
 static int __maybe_unused dwc3_meson_g12a_suspend(struct device *dev)
 {
 	struct dwc3_meson_g12a *priv = dev_get_drvdata(dev);
-	int i;
+	int i, ret;
+
+	if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+		ret = regulator_disable(priv->vbus);
+		if (ret)
+			return ret;
+	}
 
 	for (i = 0 ; i < PHY_COUNT ; ++i) {
 		phy_power_off(priv->phys[i]);
@@ -599,6 +605,12 @@ static int __maybe_unused dwc3_meson_g12a_resume(struct device *dev)
 			return ret;
 	}
 
+       if (priv->vbus && priv->otg_phy_mode == PHY_MODE_USB_HOST) {
+               ret = regulator_enable(priv->vbus);
+		if (ret)
+			return ret;
+	}
+
 	return 0;
 }
 
-- 
2.22.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

             reply	other threads:[~2019-08-21 13:35 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-21 13:35 Neil Armstrong [this message]
2019-08-21 13:35 ` [PATCH] usb: dwc3: meson-g12a: fix suspend resume regulator unbalanced disables Neil Armstrong
2019-08-21 13:35 ` Neil Armstrong
2019-08-21 18:02 ` Kevin Hilman
2019-08-21 18:02   ` Kevin Hilman
2019-08-21 18:02   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190821133518.9671-1-narmstrong@baylibre.com \
    --to=narmstrong@baylibre.com \
    --cc=balbi@kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.