From: megous@megous.com
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Rob Herring <robh+dt@kernel.org>,
Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
"David S. Miller" <davem@davemloft.net>,
netdev@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-bluetooth@vger.kernel.org,
Ondrej Jirman <megous@megous.com>
Subject: [RESEND PATCH 5/5] arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
Date: Fri, 23 Aug 2019 12:31:39 +0200 [thread overview]
Message-ID: <20190823103139.17687-6-megous@megous.com> (raw)
In-Reply-To: <20190823103139.17687-1-megous@megous.com>
From: Ondrej Jirman <megous@megous.com>
The board contains AP6256 WiFi/BT module that has its bluetooth part
connected to SoC's UART1 port. Enable this port, and add node for the
bluetooth device.
Bluetooth part is named bcm4345c5.
You'll need a BCM4345C5.hcd firmware file that can be found in the
Xulongs's repository for H6:
https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256
The driver expects the firmware at the following path relative to the
firmware directory:
brcm/BCM4345C5.hcd
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 49d954369087..a9e776446c35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -15,6 +15,7 @@
aliases {
serial0 = &uart0;
+ serial1 = &uart1;
};
chosen {
@@ -271,6 +272,24 @@
status = "okay";
};
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
+};
+
&usb2otg {
/*
* This board doesn't have a controllable VBUS even though it
--
2.23.0
WARNING: multiple messages have this Message-ID (diff)
From: megous@megous.com
To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Rob Herring <robh+dt@kernel.org>,
Marcel Holtmann <marcel@holtmann.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, Ondrej Jirman <megous@megous.com>,
netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-bluetooth@vger.kernel.org,
"David S. Miller" <davem@davemloft.net>,
linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 5/5] arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth
Date: Fri, 23 Aug 2019 12:31:39 +0200 [thread overview]
Message-ID: <20190823103139.17687-6-megous@megous.com> (raw)
In-Reply-To: <20190823103139.17687-1-megous@megous.com>
From: Ondrej Jirman <megous@megous.com>
The board contains AP6256 WiFi/BT module that has its bluetooth part
connected to SoC's UART1 port. Enable this port, and add node for the
bluetooth device.
Bluetooth part is named bcm4345c5.
You'll need a BCM4345C5.hcd firmware file that can be found in the
Xulongs's repository for H6:
https://github.com/orangepi-xunlong/OrangePiH6_external/tree/master/ap6256
The driver expects the firmware at the following path relative to the
firmware directory:
brcm/BCM4345C5.hcd
Signed-off-by: Ondrej Jirman <megous@megous.com>
---
.../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
index 49d954369087..a9e776446c35 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts
@@ -15,6 +15,7 @@
aliases {
serial0 = &uart0;
+ serial1 = &uart1;
};
chosen {
@@ -271,6 +272,24 @@
status = "okay";
};
+/* There's the BT part of the AP6256 connected to that UART */
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rtc 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
+ host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
+ shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
+ max-speed = <1500000>;
+ };
+};
+
&usb2otg {
/*
* This board doesn't have a controllable VBUS even though it
--
2.23.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2019-08-23 10:31 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 10:31 [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3 megous
2019-08-23 10:31 ` megous
2019-08-23 10:31 ` [RESEND PATCH 1/5] dt-bindings: net: Add compatible for BCM4345C5 bluetooth device megous
2019-08-23 10:31 ` megous
2019-08-23 10:31 ` megous
2019-08-29 22:45 ` Rob Herring
2019-08-29 22:45 ` Rob Herring
2019-08-29 22:45 ` Rob Herring
2019-08-23 10:31 ` [RESEND PATCH 2/5] bluetooth: bcm: Add support for loading firmware for BCM4345C5 megous
2019-08-23 10:31 ` megous
2019-08-23 10:31 ` [RESEND PATCH 3/5] bluetooth: hci_bcm: Give more time to come out of reset megous
2019-08-23 10:31 ` megous
2019-08-23 10:31 ` [RESEND PATCH 4/5] arm64: dts: allwinner: h6: Add pin configs for uart1 megous
2019-08-23 10:31 ` megous
2019-08-23 10:31 ` megous [this message]
2019-08-23 10:31 ` [RESEND PATCH 5/5] arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth megous
2019-08-30 7:53 ` [RESEND PATCH 0/5] Add bluetooth support for Orange Pi 3 Marcel Holtmann
2019-08-30 7:53 ` Marcel Holtmann
2019-08-30 9:21 ` Maxime Ripard
2019-08-30 9:21 ` Maxime Ripard
2019-08-30 12:43 ` Marcel Holtmann
2019-08-30 12:43 ` Marcel Holtmann
2019-08-30 13:20 ` Maxime Ripard
2019-08-30 13:20 ` Maxime Ripard
2019-09-04 14:19 ` Marcel Holtmann
2019-09-04 14:19 ` Marcel Holtmann
2019-09-05 11:56 ` Maxime Ripard
2019-09-05 11:56 ` Maxime Ripard
2019-10-07 14:11 ` Ondřej Jirman
2019-10-07 14:11 ` Ondřej Jirman
2019-10-07 17:58 ` Maxime Ripard
2019-10-07 17:58 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190823103139.17687-6-megous@megous.com \
--to=megous@megous.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=mark.rutland@arm.com \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.