All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kamel Bouhara <kamel.bouhara@bootlin.com>
To: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	linux-arm-kernel@lists.infradead.org
Cc: Kamel Bouhara <kamel.bouhara@bootlin.com>,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH v2] soc: at91: Add Atmel SFR SN (Serial Number) support
Date: Thu,  3 Oct 2019 11:16:36 +0200	[thread overview]
Message-ID: <20191003091636.21060-1-kamel.bouhara@bootlin.com> (raw)

Add support to read SFR's read-only registers providing the SoC
Serial Numbers (SN0+SN1) to userspace.

~ #  hexdump -n 8  -e'"%d\n"' /sys/bus/nvmem/devices/atmel-sfr0/nvmem
959527243
371539274

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
---
Changes in v2:
 - updated atmel-sfr.c to sfr.c in Makefile
 - fixed missing drvdata struct definition
 - added missing syscon header

 drivers/soc/atmel/Kconfig  |  11 ++++
 drivers/soc/atmel/Makefile |   1 +
 drivers/soc/atmel/sfr.c    | 116 +++++++++++++++++++++++++++++++++++++
 3 files changed, 128 insertions(+)
 create mode 100644 drivers/soc/atmel/sfr.c

diff --git a/drivers/soc/atmel/Kconfig b/drivers/soc/atmel/Kconfig
index 05528139b023..d61711cb9556 100644
--- a/drivers/soc/atmel/Kconfig
+++ b/drivers/soc/atmel/Kconfig
@@ -5,3 +5,14 @@ config AT91_SOC_ID
 	default ARCH_AT91
 	help
 	  Include support for the SoC bus on the Atmel ARM SoCs.
+
+config AT91_SOC_SFR
+	tristate "Special Function Registers support"
+	depends on ARCH_AT91 || COMPILE_TEST
+	help
+	  This is a driver for the Special Function Registers available on
+	  Atmel SAMA5Dx SoCs, providing access to specific aspects of the
+	  integrated memory, bridge implementations, proccessor etc.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called sfr.
diff --git a/drivers/soc/atmel/Makefile b/drivers/soc/atmel/Makefile
index 7ca355d10553..d849a897cd77 100644
--- a/drivers/soc/atmel/Makefile
+++ b/drivers/soc/atmel/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_AT91_SOC_ID) += soc.o
+obj-$(CONFIG_AT91_SOC_SFR) += sfr.o
diff --git a/drivers/soc/atmel/sfr.c b/drivers/soc/atmel/sfr.c
new file mode 100644
index 000000000000..2be306157283
--- /dev/null
+++ b/drivers/soc/atmel/sfr.c
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * sfr.c - driver for special function registers
+ *
+ * Copyright (C) 2019 Bootlin.
+ *
+ */
+#include <linux/device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define SFR_SN0		0x4c
+
+struct sfr_priv {
+	struct device			*dev;
+	struct regmap			*regmap;
+	struct nvmem_config		*config;
+	struct atmel_sfr_drvdata	*drvdata;
+};
+
+struct atmel_sfr_drvdata {
+	unsigned int nregs;
+};
+
+static int atmel_sfr_read(void *context, unsigned int offset,
+			  void *buf, size_t bytes)
+{
+	struct sfr_priv *priv = context;
+	struct atmel_sfr_drvdata *drvdata = priv->drvdata;
+
+	return regmap_bulk_read(priv->regmap, SFR_SN0 + offset,
+				buf, bytes / 4);
+}
+
+static struct nvmem_config atmel_sfr_nvmem_config = {
+	.name = "atmel-sfr",
+	.read_only = true,
+	.word_size = 4,
+	.stride = 4,
+	.reg_read = atmel_sfr_read,
+};
+
+static int atmel_sfr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct sfr_priv *priv;
+	struct nvmem_device *nvmem;
+	const struct atmel_sfr_drvdata *drvdata;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	drvdata = of_device_get_match_data(dev);
+	if (!drvdata)
+		return -EINVAL;
+
+	priv->regmap = syscon_node_to_regmap(np);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(dev, "cannot get parent's regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	priv->drvdata = drvdata;
+
+	atmel_sfr_nvmem_config.size = drvdata->nregs;
+	atmel_sfr_nvmem_config.dev = dev;
+	atmel_sfr_nvmem_config.priv = priv;
+
+	priv->config = &atmel_sfr_nvmem_config;
+
+	nvmem = devm_nvmem_register(dev, &atmel_sfr_nvmem_config);
+	if (IS_ERR(nvmem)) {
+		dev_err(dev, "error registering nvmem config\n");
+		return PTR_ERR(nvmem);
+	}
+
+	return 0;
+}
+
+static struct atmel_sfr_drvdata sama5d2_sama5d4_drvdata = {
+	.nregs = 2 * 4,
+};
+
+static const struct of_device_id atmel_sfr_dt_ids[] = {
+	{
+		.compatible = "atmel,sama5d2-sfr",
+		.data = &sama5d2_sama5d4_drvdata,
+	}, {
+		.compatible = "atmel,sama5d4-sfr",
+		.data = &sama5d2_sama5d4_drvdata,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, atmel_sfr_dt_ids);
+
+static struct platform_driver atmel_sfr_driver = {
+	.probe = atmel_sfr_probe,
+	.driver = {
+		.name = "atmel-sfr",
+		.of_match_table = atmel_sfr_dt_ids,
+	},
+};
+module_platform_driver(atmel_sfr_driver);
+
+MODULE_AUTHOR("Kamel Bouhara <kamel.bouhara@bootlin.com>");
+MODULE_DESCRIPTION("Atmel SFR SN driver for SAMA5D2/4 SoC family");
+MODULE_LICENSE("GPL v2");
+
--
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2019-10-03  9:16 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-03  9:16 Kamel Bouhara [this message]
2019-10-03  9:40 ` [PATCH v2] soc: at91: Add Atmel SFR SN (Serial Number) support Tudor.Ambarus
2019-10-03  9:50   ` Tudor.Ambarus
2019-10-03 12:06     ` Nicolas.Ferre
2019-10-03 12:10       ` Kamel Bouhara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191003091636.21060-1-kamel.bouhara@bootlin.com \
    --to=kamel.bouhara@bootlin.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.