From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
To: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>,
Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>,
Philipp Tomsich
<philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org>
Cc: u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org,
"Matwey V . Kornilov"
<matwey.kornilov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Jagan Teki
<jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>,
linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH v3 2/5] Makefile: Rename idbloader.img with u-boot-spl-rockchip.bin
Date: Fri, 18 Oct 2019 00:37:07 +0530 [thread overview]
Message-ID: <20191017190710.29985-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191017190710.29985-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
idbloader.img name is specific to rockchip, where it usually
created using rockchip tools. Since the image is created as
per U-Boot generic builds like SPL, better to follow the
generic U-Boot naming notation like other SoC's following.
Enable idbloader.img with u-boot-spl-rockchip.bin and create
the same in spl directory since it is SPL file and Makefile.spl
will clean it by default.
Cc: Kever Yang <kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Cc: Matwey V. Kornilov <matwey.kornilov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index ec55e0f6a4..918b5d53e0 100644
--- a/Makefile
+++ b/Makefile
@@ -887,7 +887,7 @@ ALL-y += u-boot-with-dtb.bin
endif
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
-ALL-y += idbloader.img
+ALL-y += spl/u-boot-spl-rockchip.bin
endif
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
@@ -1344,7 +1344,7 @@ endif
MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
$(call if_changed,mkimage)
-idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
+spl/u-boot-spl-rockchip.bin: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
$(call if_changed,cat)
endif
--
2.18.0.321.gffc6fa0e3
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH v3 2/5] Makefile: Rename idbloader.img with u-boot-spl-rockchip.bin
Date: Fri, 18 Oct 2019 00:37:07 +0530 [thread overview]
Message-ID: <20191017190710.29985-3-jagan@amarulasolutions.com> (raw)
In-Reply-To: <20191017190710.29985-1-jagan@amarulasolutions.com>
idbloader.img name is specific to rockchip, where it usually
created using rockchip tools. Since the image is created as
per U-Boot generic builds like SPL, better to follow the
generic U-Boot naming notation like other SoC's following.
Enable idbloader.img with u-boot-spl-rockchip.bin and create
the same in spl directory since it is SPL file and Makefile.spl
will clean it by default.
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
Makefile | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Makefile b/Makefile
index ec55e0f6a4..918b5d53e0 100644
--- a/Makefile
+++ b/Makefile
@@ -887,7 +887,7 @@ ALL-y += u-boot-with-dtb.bin
endif
ifeq ($(CONFIG_ARCH_ROCKCHIP)$(CONFIG_SPL)$(CONFIG_TPL),yyy)
-ALL-y += idbloader.img
+ALL-y += spl/u-boot-spl-rockchip.bin
endif
LDFLAGS_u-boot += $(LDFLAGS_FINAL)
@@ -1344,7 +1344,7 @@ endif
MKIMAGEFLAGS_u-boot-tpl.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
tpl/u-boot-tpl.img: tpl/u-boot-tpl.bin FORCE
$(call if_changed,mkimage)
-idbloader.img: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
+spl/u-boot-spl-rockchip.bin: tpl/u-boot-tpl.img spl/u-boot-spl.bin FORCE
$(call if_changed,cat)
endif
--
2.18.0.321.gffc6fa0e3
next prev parent reply other threads:[~2019-10-17 19:07 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-17 19:07 [PATCH v3 0/5] rockchip: Add Binman support Jagan Teki
2019-10-17 19:07 ` [U-Boot] " Jagan Teki
[not found] ` <20191017190710.29985-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-10-17 19:07 ` [PATCH v3 1/5] Makefile: Add rockchip image type Jagan Teki
2019-10-17 19:07 ` [U-Boot] " Jagan Teki
2019-11-10 14:16 ` Kever Yang
2019-11-10 14:16 ` [U-Boot] " Kever Yang
2019-10-17 19:07 ` Jagan Teki [this message]
2019-10-17 19:07 ` [U-Boot] [PATCH v3 2/5] Makefile: Rename idbloader.img with u-boot-spl-rockchip.bin Jagan Teki
2019-10-18 10:56 ` Kever Yang
2019-10-18 10:56 ` [U-Boot] " Kever Yang
2019-10-21 5:26 ` Jagan Teki
2019-10-21 5:26 ` [U-Boot] " Jagan Teki
2019-10-21 8:13 ` Mark Kettenis
2019-10-21 8:13 ` [U-Boot] " Mark Kettenis
2019-10-22 10:10 ` Jagan Teki
2019-10-22 10:10 ` [U-Boot] " Jagan Teki
2019-11-15 6:34 ` Kever Yang
2019-11-15 6:34 ` [U-Boot] " Kever Yang
2019-10-17 19:07 ` [PATCH v3 3/5] arm: dts: rk3368: Add rk3368-u-boot.dtsi Jagan Teki
2019-10-17 19:07 ` [U-Boot] " Jagan Teki
2019-10-17 19:07 ` [PATCH v3 4/5] rockchip: Add Binman support Jagan Teki
2019-10-17 19:07 ` [U-Boot] " Jagan Teki
[not found] ` <20191017190710.29985-5-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-10-21 8:16 ` Jagan Teki
2019-10-21 8:16 ` [U-Boot] " Jagan Teki
2019-10-17 19:07 ` [PATCH v3 5/5] doc: boards: Add rockchip documentation Jagan Teki
2019-10-17 19:07 ` [U-Boot] " Jagan Teki
[not found] ` <20191017190710.29985-6-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>
2019-10-18 12:20 ` Robin Murphy
2019-10-18 12:20 ` [U-Boot] " Robin Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191017190710.29985-3-jagan@amarulasolutions.com \
--to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=matwey.kornilov-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \
--cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.