All of lore.kernel.org
 help / color / mirror / Atom feed
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>, <linux-omap@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Benoit Parrot <bparrot@ti.com>
Subject: [Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes
Date: Fri, 18 Oct 2019 10:48:47 -0500	[thread overview]
Message-ID: <20191018154849.3127-8-bparrot@ti.com> (raw)
In-Reply-To: <20191018154849.3127-1-bparrot@ti.com>

Add device nodes for CSI2 camera board OV5640.
Add the CAL port nodes with the necessary linkage to the ov5640 nodes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..c9fdf62c68e9 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -116,6 +116,12 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	clk_ov5640_fixed: clk_ov5640_fixed {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &i2c1 {
@@ -317,6 +323,27 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -447,3 +474,15 @@
 		max-bitrate = <5000000>;
 	};
 };
+
+&cal {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint@0 {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com>
To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com>
Subject: [Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes
Date: Fri, 18 Oct 2019 10:48:47 -0500	[thread overview]
Message-ID: <20191018154849.3127-8-bparrot@ti.com> (raw)
In-Reply-To: <20191018154849.3127-1-bparrot@ti.com>

Add device nodes for CSI2 camera board OV5640.
Add the CAL port nodes with the necessary linkage to the ov5640 nodes.

Signed-off-by: Benoit Parrot <bparrot@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 39 +++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 1fb6f13fb5e2..c9fdf62c68e9 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -116,6 +116,12 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 	};
+
+	clk_ov5640_fixed: clk_ov5640_fixed {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
 };
 
 &i2c1 {
@@ -317,6 +323,27 @@
 	};
 };
 
+&i2c5 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	ov5640@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2_phy0>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
 &cpu0 {
 	vdd-supply = <&buck10_reg>;
 };
@@ -447,3 +474,15 @@
 		max-bitrate = <5000000>;
 	};
 };
+
+&cal {
+	status = "okay";
+};
+
+&csi2_0 {
+	csi2_phy0: endpoint@0 {
+		remote-endpoint = <&csi2_cam0>;
+		clock-lanes = <0>;
+		data-lanes = <1 2>;
+	};
+};
-- 
2.17.1

  parent reply	other threads:[~2019-10-18 15:46 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-10-18 15:48 [Patch 0/9] ARM: dts: dra7: add cal nodes Benoit Parrot
2019-10-18 15:48 ` Benoit Parrot
2019-10-18 15:48 ` [Patch 1/9] ARM: dts: dra7: add cam clkctrl node Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-22 15:40   ` Tony Lindgren
2019-10-22 16:13     ` Benoit Parrot
2019-10-22 16:13       ` Benoit Parrot
2019-10-22 16:28       ` Tony Lindgren
2019-10-18 15:48 ` [Patch 2/9] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-18 15:48 ` [Patch 3/9] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-18 15:48 ` [Patch 4/9] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-18 15:48 ` [Patch 5/9] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-22 15:44   ` Tony Lindgren
2019-10-22 16:16     ` Benoit Parrot
2019-10-22 16:16       ` Benoit Parrot
2019-10-22 16:27       ` Tony Lindgren
2019-10-18 15:48 ` [Patch 6/9] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-18 15:48 ` Benoit Parrot [this message]
2019-10-18 15:48   ` [Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot
2019-10-18 15:48 ` [Patch 8/9] arm64: dts: k3-am65-main Add CAL node Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot
2019-10-18 15:48 ` [Patch 9/9] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot
2019-10-18 15:48   ` Benoit Parrot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191018154849.3127-8-bparrot@ti.com \
    --to=bparrot@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=t-kristo@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.