From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com> Cc: Rob Herring <robh+dt@kernel.org>, <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Benoit Parrot <bparrot@ti.com> Subject: [Patch 8/9] arm64: dts: k3-am65-main Add CAL node Date: Fri, 18 Oct 2019 10:48:48 -0500 [thread overview] Message-ID: <20191018154849.3127-9-bparrot@ti.com> (raw) In-Reply-To: <20191018154849.3127-1-bparrot@ti.com> Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 799c75fa7981..9bd9a74d5e33 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -516,4 +516,27 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + syscon-camerrx = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Benoit Parrot <bparrot@ti.com> To: Tony Lindgren <tony@atomide.com>, Tero Kristo <t-kristo@ti.com> Cc: Rob Herring <robh+dt@kernel.org>, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Benoit Parrot <bparrot@ti.com> Subject: [Patch 8/9] arm64: dts: k3-am65-main Add CAL node Date: Fri, 18 Oct 2019 10:48:48 -0500 [thread overview] Message-ID: <20191018154849.3127-9-bparrot@ti.com> (raw) In-Reply-To: <20191018154849.3127-1-bparrot@ti.com> Add CAL dtsi node for AM654 device. Including proper power-domains and clock properties. Signed-off-by: Benoit Parrot <bparrot@ti.com> --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 799c75fa7981..9bd9a74d5e33 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -516,4 +516,27 @@ dma-coherent; interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>; }; + + cal: cal@6f03000 { + compatible = "ti,am654-cal"; + reg = <0x0 0x06f03000 0x0 0x400>, + <0x0 0x06f03800 0x0 0x40>; + reg-names = "cal_top", + "cal_rx_core0"; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + syscon-camerrx = <&scm_conf 0x40c0>; + clock-names = "fck"; + clocks = <&k3_clks 2 0>; + power-domains = <&k3_pds 2 TI_SCI_PD_EXCLUSIVE>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + csi2_0: port@0 { + reg = <0>; + }; + }; + }; }; -- 2.17.1
next prev parent reply other threads:[~2019-10-18 15:46 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-10-18 15:48 [Patch 0/9] ARM: dts: dra7: add cal nodes Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` [Patch 1/9] ARM: dts: dra7: add cam clkctrl node Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-22 15:40 ` Tony Lindgren 2019-10-22 16:13 ` Benoit Parrot 2019-10-22 16:13 ` Benoit Parrot 2019-10-22 16:28 ` Tony Lindgren 2019-10-18 15:48 ` [Patch 2/9] ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` [Patch 3/9] ARM: dts: dra7-l4: Add ti-sysc node for CAM Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` [Patch 4/9] ARM: dts: DRA72: Add CAL dtsi node Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` [Patch 5/9] arm: dts: dra72-evm-common: Add entries for the CSI2 cameras Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-22 15:44 ` Tony Lindgren 2019-10-22 16:16 ` Benoit Parrot 2019-10-22 16:16 ` Benoit Parrot 2019-10-22 16:27 ` Tony Lindgren 2019-10-18 15:48 ` [Patch 6/9] arm: dtsi: dra76x: Add CAL dtsi node Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` [Patch 7/9] arm: dts: dra76-evm: Add CAL and OV5640 nodes Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot [this message] 2019-10-18 15:48 ` [Patch 8/9] arm64: dts: k3-am65-main Add CAL node Benoit Parrot 2019-10-18 15:48 ` [Patch 9/9] arm64: dts: k3-am654-base-board: Add CSI2 OV5640 camera Benoit Parrot 2019-10-18 15:48 ` Benoit Parrot
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191018154849.3127-9-bparrot@ti.com \ --to=bparrot@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.