All of lore.kernel.org
 help / color / mirror / Atom feed
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Harish Jenny K N <harish_kandiga@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Alexander Graf <graf@amazon.com>,
	Peter Maydell <peter.maydell@linaro.org>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Phil Reid <preid@electromag.com.au>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	linux-gpio@vger.kernel.org, linux-doc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org, qemu-devel@nongnu.org,
	Geert Uytterhoeven <geert+renesas@glider.be>
Subject: [PATCH v3 5/7] gpio: Add GPIO Aggregator/Repeater driver
Date: Wed, 27 Nov 2019 09:42:51 +0100	[thread overview]
Message-ID: <20191127084253.16356-6-geert+renesas@glider.be> (raw)
In-Reply-To: <20191127084253.16356-1-geert+renesas@glider.be>

GPIO controllers are exported to userspace using /dev/gpiochip*
character devices.  Access control to these devices is provided by
standard UNIX file system permissions, on an all-or-nothing basis:
either a GPIO controller is accessible for a user, or it is not.
Currently no mechanism exists to control access to individual GPIOs.

Hence add a GPIO driver to aggregate existing GPIOs, and expose them as
a new gpiochip.

This supports the following use cases:
  1. Aggregating GPIOs using Sysfs
     This is useful for implementing access control, and assigning a set
     of GPIOs to a specific user or virtual machine.

  2. GPIO Repeater in Device Tree
     This supports modelling e.g. GPIO inverters in DT.

  3. Generic GPIO Driver
     This provides userspace access to a simple GPIO-operated device
     described in DT, cfr. e.g. spidev for SPI-operated devices.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
  - Absorb GPIO forwarder,
  - Integrate GPIO Repeater and Generic GPIO driver functionality,
  - Use the aggregator parameters to create a GPIO lookup table instead
    of an array of GPIO descriptors, which allows to simplify the code:
      1. This removes the need for calling gpio_name_to_desc(),
         gpiochip_find(), gpiochip_get_desc(), and gpiod_request(),
      2. This allows the platform device to always use
         devm_gpiod_get_index(), regardless of the origin of the GPIOs,
  - Move parameter parsing from platform device probe to sysfs attribute
    store, removing the need for platform data passing,
  - Use more devm_*() functions to simplify cleanup,
  - Add pr_fmt(),
  - General refactoring.

v2:
  - Add missing initialization of i in gpio_virt_agg_probe(),
  - Update for removed .need_valid_mask field and changed
    .init_valid_mask() signature,
  - Drop "virtual", rename to gpio-aggregator,
  - Drop bogus FIXME related to gpiod_set_transitory() expectations,
  - Use new GPIO Forwarder Helper,
  - Lift limit on the maximum number of GPIOs,
  - Improve parsing:
      - add support for specifying GPIOs by line name,
      - add support for specifying GPIO chips by ID,
      - add support for GPIO offset ranges,
      - names and offset specifiers must be separated by whitespace,
      - GPIO offsets must separated by spaces,
  - Use str_has_prefix() and kstrtouint().
---
 drivers/gpio/Kconfig           |  13 +
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-aggregator.c | 587 +++++++++++++++++++++++++++++++++
 3 files changed, 601 insertions(+)
 create mode 100644 drivers/gpio/gpio-aggregator.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8adffd42f8cb0559..36b6b57a6b05e906 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1507,6 +1507,19 @@ config GPIO_VIPERBOARD
 
 endmenu
 
+config GPIO_AGGREGATOR
+	tristate "GPIO Aggregator/Repeater"
+	help
+	  Say yes here to enable the GPIO Aggregator and repeater, which
+	  provides a way to aggregate and/or repeat existing GPIOs into a new
+	  GPIO device.
+	  This can serve the following purposes:
+	    1. Assign a collection of GPIOs to a user, or export them to a
+	       virtual machine,
+	    2. Support GPIOs that are connected to a physical inverter,
+	    3. Provide a generic driver for a GPIO-operated device, to be
+               controlled from userspace using the GPIO chardev interface.
+
 config GPIO_MOCKUP
 	tristate "GPIO Testing Driver"
 	select IRQ_SIM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 34eb8b2b12dd656c..f9971eeb1f32335f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
 obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)		+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AGGREGATOR)		+= gpio-aggregator.o
 obj-$(CONFIG_GPIO_ALTERA_A10SR)		+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-altera.o
 obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
new file mode 100644
index 0000000000000000..873578c6f9683db8
--- /dev/null
+++ b/drivers/gpio/gpio-aggregator.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// GPIO Aggregator and Repeater
+//
+// Copyright (C) 2019 Glider bvba
+
+#define DRV_NAME       "gpio-aggregator"
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include "gpiolib.h"
+
+
+	/*
+	 * GPIO Aggregator sysfs interface
+	 */
+
+struct gpio_aggregator {
+	struct gpiod_lookup_table *lookups;
+	struct platform_device *pdev;
+	char args[];
+};
+
+static DEFINE_MUTEX(gpio_aggregator_lock);	/* protects idr */
+static DEFINE_IDR(gpio_aggregator_idr);
+
+static char *get_arg(char **args)
+{
+	char *start = *args, *end;
+
+	while (isspace(*start))
+		start++;
+
+	if (!*start)
+		return NULL;
+
+	if (*start == '"') {
+		/* Quoted arg */
+		end = strchr(++start, '"');
+		if (!end)
+			return ERR_PTR(-EINVAL);
+	} else {
+		/* Unquoted arg */
+		for (end = start; *end && !isspace(*end); end++) ;
+	}
+
+	if (*end)
+		*end++ = '\0';
+
+	*args = end;
+	return start;
+}
+
+static bool isrange(const char *s)
+{
+	size_t n = strlen(s);
+
+	if (IS_ERR_OR_NULL(s))
+		return false;
+
+	while (1) {
+		n = strspn(s, "0123456789");
+		if (!n)
+			return false;
+
+		s += n;
+
+		switch (*s++) {
+		case '\0':
+			return true;
+
+		case '-':
+		case ',':
+			break;
+
+		default:
+			return false;
+		}
+	}
+}
+
+static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *label,
+			 int hwnum, unsigned int *n)
+{
+	struct gpiod_lookup_table *lookups;
+
+	lookups = krealloc(aggr->lookups, struct_size(lookups, table, *n + 2),
+			   GFP_KERNEL);
+	if (!lookups)
+		return -ENOMEM;
+
+	lookups->table[*n].chip_label = label;
+	lookups->table[*n].chip_hwnum = hwnum;
+	lookups->table[*n].idx = *n;
+
+	(*n)++;
+	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
+
+	aggr->lookups = lookups;
+	return 0;
+}
+
+static int aggr_parse(struct gpio_aggregator *aggr)
+{
+	char *name, *offsets, *first, *last, *next;
+	unsigned int a, b, i, n = 0;
+	char *args = aggr->args;
+	int error;
+
+	for (name = get_arg(&args), offsets = get_arg(&args); name;
+	     offsets = get_arg(&args)) {
+		if (IS_ERR(name)) {
+			pr_err("Cannot get GPIO specifier: %ld\n",
+			       PTR_ERR(name));
+			return PTR_ERR(name);
+		}
+
+		if (!isrange(offsets)) {
+			/* Named GPIO line */
+			error = aggr_add_gpio(aggr, name, -1, &n);
+			if (error)
+				return error;
+
+			name = offsets;
+			continue;
+		}
+
+		/* GPIO chip + offset(s) */
+		for (first = offsets; *first; first = next) {
+			next = strchrnul(first, ',');
+			if (*next)
+				*next++ = '\0';
+
+			last = strchr(first, '-');
+			if (last)
+				*last++ = '\0';
+
+			if (kstrtouint(first, 10, &a)) {
+				pr_err("Cannot parse GPIO index %s\n", first);
+				return -EINVAL;
+			}
+
+			if (!last) {
+				b = a;
+			} else if (kstrtouint(last, 10, &b)) {
+				pr_err("Cannot parse GPIO index %s\n", last);
+				return -EINVAL;
+			}
+
+			for (i = a; i <= b; i++) {
+				error = aggr_add_gpio(aggr, name, i, &n);
+				if (error)
+					return error;
+			}
+		}
+
+		name = get_arg(&args);
+	}
+
+	if (!n) {
+		pr_err("No GPIOs specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t new_device_store(struct device_driver *driver, const char *buf,
+				size_t count)
+{
+	struct gpio_aggregator *aggr;
+	struct platform_device *pdev;
+	int res, id;
+
+	/* kernfs guarantees string termination, so count + 1 is safe */
+	aggr = kzalloc(sizeof(*aggr) + count + 1, GFP_KERNEL);
+	if (!aggr)
+		return -ENOMEM;
+
+	memcpy(aggr->args, buf, count + 1);
+
+	aggr->lookups = kzalloc(struct_size(aggr->lookups, table, 1),
+				GFP_KERNEL);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto free_ga;
+	}
+
+	mutex_lock(&gpio_aggregator_lock);
+	id = idr_alloc(&gpio_aggregator_idr, aggr, 0, 0, GFP_KERNEL);
+	mutex_unlock(&gpio_aggregator_lock);
+
+	if (id < 0) {
+		res = id;
+		goto free_table;
+	}
+
+	aggr->lookups->dev_id = kasprintf(GFP_KERNEL, "%s.%d", DRV_NAME, id);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto remove_idr;
+	}
+
+	res = aggr_parse(aggr);
+	if (res)
+		goto free_dev_id;
+
+	gpiod_add_lookup_table(aggr->lookups);
+
+	pdev = platform_device_register_simple(DRV_NAME, id, NULL, 0);
+	if (IS_ERR(pdev)) {
+		res = PTR_ERR(pdev);
+		goto remove_table;
+	}
+
+	aggr->pdev = pdev;
+	return count;
+
+remove_table:
+	gpiod_remove_lookup_table(aggr->lookups);
+free_dev_id:
+	kfree(aggr->lookups->dev_id);
+remove_idr:
+	mutex_lock(&gpio_aggregator_lock);
+	idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+free_table:
+	kfree(aggr->lookups);
+free_ga:
+	kfree(aggr);
+	return res;
+}
+
+static DRIVER_ATTR_WO(new_device);
+
+static void gpio_aggregator_free(struct gpio_aggregator *aggr)
+{
+	platform_device_unregister(aggr->pdev);
+	gpiod_remove_lookup_table(aggr->lookups);
+	kfree(aggr->lookups->dev_id);
+	kfree(aggr->lookups);
+	kfree(aggr);
+}
+
+static ssize_t delete_device_store(struct device_driver *driver,
+				   const char *buf, size_t count)
+{
+	struct gpio_aggregator *aggr;
+	unsigned int id;
+	int error;
+
+	if (!str_has_prefix(buf, DRV_NAME "."))
+		return -EINVAL;
+
+	error = kstrtouint(buf + strlen(DRV_NAME "."), 10, &id);
+	if (error)
+		return error;
+
+	mutex_lock(&gpio_aggregator_lock);
+	aggr = idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+	if (!aggr)
+		return -ENOENT;
+
+	gpio_aggregator_free(aggr);
+	return count;
+}
+static DRIVER_ATTR_WO(delete_device);
+
+static struct attribute *gpio_aggregator_attrs[] = {
+	&driver_attr_new_device.attr,
+	&driver_attr_delete_device.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_aggregator);
+
+static int __exit gpio_aggregator_idr_remove(int id, void *p, void *data)
+{
+	gpio_aggregator_free(p);
+	return 0;
+}
+
+static void __exit gpio_aggregator_remove_all(void)
+{
+	mutex_lock(&gpio_aggregator_lock);
+	idr_for_each(&gpio_aggregator_idr, gpio_aggregator_idr_remove, NULL);
+	idr_destroy(&gpio_aggregator_idr);
+	mutex_unlock(&gpio_aggregator_lock);
+}
+
+
+	/*
+	 *  Common GPIO Forwarder
+	 */
+
+struct gpiochip_fwd {
+	struct gpio_chip chip;
+	struct gpio_desc **descs;
+	union {
+		struct mutex mlock;	/* protects tmp[] if can_sleep */
+		spinlock_t slock;	/* protects tmp[] if !can_sleep */
+	};
+	unsigned long tmp[];		/* values and descs for multiple ops */
+};
+
+static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_direction(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_input(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_output(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_output(fwd->descs[offset], value);
+}
+
+static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_value(fwd->descs[offset]);
+}
+
+static int gpio_fwd_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+	int error;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	values = &fwd->tmp[0];
+	bitmap_clear(values, 0, fwd->chip.ngpio);
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		descs[j++] = fwd->descs[i];
+
+	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (!error) {
+		j = 0;
+		for_each_set_bit(i, mask, fwd->chip.ngpio)
+			__assign_bit(i, bits, test_bit(j++, values));
+	}
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+
+	return error;
+}
+
+static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	gpiod_set_value(fwd->descs[offset], value);
+}
+
+static void gpio_fwd_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio) {
+		__assign_bit(j, values, test_bit(i, bits));
+		descs[j++] = fwd->descs[i];
+	}
+
+	gpiod_set_array_value(j, descs, NULL, values);
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+}
+
+static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	chip = fwd->descs[offset]->gdev->chip;
+	if (chip->set_config)
+		return chip->set_config(chip, offset, config);
+
+	return -ENOTSUPP;
+}
+
+static int gpio_fwd_init_valid_mask(struct gpio_chip *chip,
+				    unsigned long *valid_mask,
+				    unsigned int ngpios)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned int i;
+
+	for (i = 0; i < ngpios; i++) {
+		if (!gpiochip_line_is_valid(fwd->descs[i]->gdev->chip,
+					    gpio_chip_hwgpio(fwd->descs[i])))
+			clear_bit(i, valid_mask);
+	}
+
+	return 0;
+}
+
+/**
+ * gpiochip_fwd_create() - Create a new GPIO forwarder
+ * @dev: Parent device pointer
+ * @ngpios: Number of GPIOs in the forwarder.
+ * @descs: Array containing the GPIO descriptors to forward to.
+ *         This array must contain @ngpios entries, and must not be deallocated
+ *         before the forwarder has been destroyed again.
+ *
+ * This function creates a new gpiochip, which forwards all GPIO operations to
+ * the passed GPIO descriptors.
+ *
+ * Return: An opaque object pointer, or an ERR_PTR()-encoded negative error
+ *         code on failure.
+ */
+static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
+						unsigned int ngpios,
+						struct gpio_desc *descs[])
+{
+	const char *label = dev_name(dev);
+	struct gpiochip_fwd *fwd;
+	struct gpio_chip *chip;
+	unsigned int i;
+	int error;
+
+	fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
+			   BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
+	if (!fwd)
+		return ERR_PTR(-ENOMEM);
+
+	chip = &fwd->chip;
+
+	for (i = 0; i < ngpios; i++) {
+		dev_dbg(dev, "gpio %u => gpio-%d (%s)\n", i,
+			desc_to_gpio(descs[i]), descs[i]->label ? : "?");
+
+		if (gpiod_cansleep(descs[i]))
+			chip->can_sleep = true;
+		if (descs[i]->gdev->chip->set_config)
+			chip->set_config = gpio_fwd_set_config;
+		if (descs[i]->gdev->chip->init_valid_mask)
+			chip->init_valid_mask = gpio_fwd_init_valid_mask;
+	}
+
+	chip->label = label;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get_direction = gpio_fwd_get_direction;
+	chip->direction_input = gpio_fwd_direction_input;
+	chip->direction_output = gpio_fwd_direction_output;
+	chip->get = gpio_fwd_get;
+	chip->get_multiple = gpio_fwd_get_multiple;
+	chip->set = gpio_fwd_set;
+	chip->set_multiple = gpio_fwd_set_multiple;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+	fwd->descs = descs;
+
+	if (chip->can_sleep)
+		mutex_init(&fwd->mlock);
+	else
+		spin_lock_init(&fwd->slock);
+
+	error = devm_gpiochip_add_data(dev, chip, fwd);
+	if (error)
+		return ERR_PTR(error);
+
+	return fwd;
+}
+
+
+	/*
+	 *  Common GPIO Aggregator/Repeater platform device
+	 */
+
+static int gpio_aggregator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_desc **descs;
+	struct gpiochip_fwd *fwd;
+	int i, n;
+
+	n = gpiod_count(dev, NULL);
+	if (n < 0)
+		return n;
+
+	descs = devm_kmalloc_array(dev, n, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++) {
+		descs[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	fwd = gpiochip_fwd_create(dev, n, descs);
+	if (IS_ERR(fwd))
+		return PTR_ERR(fwd);
+
+	platform_set_drvdata(pdev, fwd);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_aggregator_dt_ids[] = {
+	{ .compatible = "gpio-repeater" },
+	/*
+	 * Add GPIO-operated devices controlled from userspace below,
+	 * or use "driver_override" in sysfs
+	 */
+	{},
+};
+MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
+#endif
+
+static struct platform_driver gpio_aggregator_driver = {
+	.probe = gpio_aggregator_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.groups = gpio_aggregator_groups,
+		.of_match_table = of_match_ptr(gpio_aggregator_dt_ids),
+	},
+};
+
+static int __init gpio_aggregator_init(void)
+{
+	return platform_driver_register(&gpio_aggregator_driver);
+}
+module_init(gpio_aggregator_init);
+
+static void __exit gpio_aggregator_exit(void)
+{
+	gpio_aggregator_remove_all();
+	platform_driver_unregister(&gpio_aggregator_driver);
+}
+module_exit(gpio_aggregator_exit);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_DESCRIPTION("GPIO Aggregator/Repeater");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Geert Uytterhoeven <geert+renesas@glider.be>
To: Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Harish Jenny K N <harish_kandiga@mentor.com>,
	Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Peter Maydell <peter.maydell@linaro.org>,
	qemu-devel@nongnu.org,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	linux-doc@vger.kernel.org, Marc Zyngier <marc.zyngier@arm.com>,
	Magnus Damm <magnus.damm@gmail.com>,
	Christoffer Dall <christoffer.dall@arm.com>,
	linux-kernel@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	Alexander Graf <graf@amazon.com>,
	Paolo Bonzini <pbonzini@redhat.com>,
	Phil Reid <preid@electromag.com.au>
Subject: [PATCH v3 5/7] gpio: Add GPIO Aggregator/Repeater driver
Date: Wed, 27 Nov 2019 09:42:51 +0100	[thread overview]
Message-ID: <20191127084253.16356-6-geert+renesas@glider.be> (raw)
In-Reply-To: <20191127084253.16356-1-geert+renesas@glider.be>

GPIO controllers are exported to userspace using /dev/gpiochip*
character devices.  Access control to these devices is provided by
standard UNIX file system permissions, on an all-or-nothing basis:
either a GPIO controller is accessible for a user, or it is not.
Currently no mechanism exists to control access to individual GPIOs.

Hence add a GPIO driver to aggregate existing GPIOs, and expose them as
a new gpiochip.

This supports the following use cases:
  1. Aggregating GPIOs using Sysfs
     This is useful for implementing access control, and assigning a set
     of GPIOs to a specific user or virtual machine.

  2. GPIO Repeater in Device Tree
     This supports modelling e.g. GPIO inverters in DT.

  3. Generic GPIO Driver
     This provides userspace access to a simple GPIO-operated device
     described in DT, cfr. e.g. spidev for SPI-operated devices.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
v3:
  - Absorb GPIO forwarder,
  - Integrate GPIO Repeater and Generic GPIO driver functionality,
  - Use the aggregator parameters to create a GPIO lookup table instead
    of an array of GPIO descriptors, which allows to simplify the code:
      1. This removes the need for calling gpio_name_to_desc(),
         gpiochip_find(), gpiochip_get_desc(), and gpiod_request(),
      2. This allows the platform device to always use
         devm_gpiod_get_index(), regardless of the origin of the GPIOs,
  - Move parameter parsing from platform device probe to sysfs attribute
    store, removing the need for platform data passing,
  - Use more devm_*() functions to simplify cleanup,
  - Add pr_fmt(),
  - General refactoring.

v2:
  - Add missing initialization of i in gpio_virt_agg_probe(),
  - Update for removed .need_valid_mask field and changed
    .init_valid_mask() signature,
  - Drop "virtual", rename to gpio-aggregator,
  - Drop bogus FIXME related to gpiod_set_transitory() expectations,
  - Use new GPIO Forwarder Helper,
  - Lift limit on the maximum number of GPIOs,
  - Improve parsing:
      - add support for specifying GPIOs by line name,
      - add support for specifying GPIO chips by ID,
      - add support for GPIO offset ranges,
      - names and offset specifiers must be separated by whitespace,
      - GPIO offsets must separated by spaces,
  - Use str_has_prefix() and kstrtouint().
---
 drivers/gpio/Kconfig           |  13 +
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-aggregator.c | 587 +++++++++++++++++++++++++++++++++
 3 files changed, 601 insertions(+)
 create mode 100644 drivers/gpio/gpio-aggregator.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 8adffd42f8cb0559..36b6b57a6b05e906 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1507,6 +1507,19 @@ config GPIO_VIPERBOARD
 
 endmenu
 
+config GPIO_AGGREGATOR
+	tristate "GPIO Aggregator/Repeater"
+	help
+	  Say yes here to enable the GPIO Aggregator and repeater, which
+	  provides a way to aggregate and/or repeat existing GPIOs into a new
+	  GPIO device.
+	  This can serve the following purposes:
+	    1. Assign a collection of GPIOs to a user, or export them to a
+	       virtual machine,
+	    2. Support GPIOs that are connected to a physical inverter,
+	    3. Provide a generic driver for a GPIO-operated device, to be
+               controlled from userspace using the GPIO chardev interface.
+
 config GPIO_MOCKUP
 	tristate "GPIO Testing Driver"
 	select IRQ_SIM
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 34eb8b2b12dd656c..f9971eeb1f32335f 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_GPIO_74XX_MMIO)		+= gpio-74xx-mmio.o
 obj-$(CONFIG_GPIO_ADNP)			+= gpio-adnp.o
 obj-$(CONFIG_GPIO_ADP5520)		+= gpio-adp5520.o
 obj-$(CONFIG_GPIO_ADP5588)		+= gpio-adp5588.o
+obj-$(CONFIG_GPIO_AGGREGATOR)		+= gpio-aggregator.o
 obj-$(CONFIG_GPIO_ALTERA_A10SR)		+= gpio-altera-a10sr.o
 obj-$(CONFIG_GPIO_ALTERA)  		+= gpio-altera.o
 obj-$(CONFIG_GPIO_AMD8111)		+= gpio-amd8111.o
diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
new file mode 100644
index 0000000000000000..873578c6f9683db8
--- /dev/null
+++ b/drivers/gpio/gpio-aggregator.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// GPIO Aggregator and Repeater
+//
+// Copyright (C) 2019 Glider bvba
+
+#define DRV_NAME       "gpio-aggregator"
+#define pr_fmt(fmt)	DRV_NAME ": " fmt
+
+#include <linux/bitmap.h>
+#include <linux/bitops.h>
+#include <linux/ctype.h>
+#include <linux/gpio/driver.h>
+#include <linux/gpio/machine.h>
+#include <linux/idr.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/overflow.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+
+#include "gpiolib.h"
+
+
+	/*
+	 * GPIO Aggregator sysfs interface
+	 */
+
+struct gpio_aggregator {
+	struct gpiod_lookup_table *lookups;
+	struct platform_device *pdev;
+	char args[];
+};
+
+static DEFINE_MUTEX(gpio_aggregator_lock);	/* protects idr */
+static DEFINE_IDR(gpio_aggregator_idr);
+
+static char *get_arg(char **args)
+{
+	char *start = *args, *end;
+
+	while (isspace(*start))
+		start++;
+
+	if (!*start)
+		return NULL;
+
+	if (*start == '"') {
+		/* Quoted arg */
+		end = strchr(++start, '"');
+		if (!end)
+			return ERR_PTR(-EINVAL);
+	} else {
+		/* Unquoted arg */
+		for (end = start; *end && !isspace(*end); end++) ;
+	}
+
+	if (*end)
+		*end++ = '\0';
+
+	*args = end;
+	return start;
+}
+
+static bool isrange(const char *s)
+{
+	size_t n = strlen(s);
+
+	if (IS_ERR_OR_NULL(s))
+		return false;
+
+	while (1) {
+		n = strspn(s, "0123456789");
+		if (!n)
+			return false;
+
+		s += n;
+
+		switch (*s++) {
+		case '\0':
+			return true;
+
+		case '-':
+		case ',':
+			break;
+
+		default:
+			return false;
+		}
+	}
+}
+
+static int aggr_add_gpio(struct gpio_aggregator *aggr, const char *label,
+			 int hwnum, unsigned int *n)
+{
+	struct gpiod_lookup_table *lookups;
+
+	lookups = krealloc(aggr->lookups, struct_size(lookups, table, *n + 2),
+			   GFP_KERNEL);
+	if (!lookups)
+		return -ENOMEM;
+
+	lookups->table[*n].chip_label = label;
+	lookups->table[*n].chip_hwnum = hwnum;
+	lookups->table[*n].idx = *n;
+
+	(*n)++;
+	memset(&lookups->table[*n], 0, sizeof(lookups->table[*n]));
+
+	aggr->lookups = lookups;
+	return 0;
+}
+
+static int aggr_parse(struct gpio_aggregator *aggr)
+{
+	char *name, *offsets, *first, *last, *next;
+	unsigned int a, b, i, n = 0;
+	char *args = aggr->args;
+	int error;
+
+	for (name = get_arg(&args), offsets = get_arg(&args); name;
+	     offsets = get_arg(&args)) {
+		if (IS_ERR(name)) {
+			pr_err("Cannot get GPIO specifier: %ld\n",
+			       PTR_ERR(name));
+			return PTR_ERR(name);
+		}
+
+		if (!isrange(offsets)) {
+			/* Named GPIO line */
+			error = aggr_add_gpio(aggr, name, -1, &n);
+			if (error)
+				return error;
+
+			name = offsets;
+			continue;
+		}
+
+		/* GPIO chip + offset(s) */
+		for (first = offsets; *first; first = next) {
+			next = strchrnul(first, ',');
+			if (*next)
+				*next++ = '\0';
+
+			last = strchr(first, '-');
+			if (last)
+				*last++ = '\0';
+
+			if (kstrtouint(first, 10, &a)) {
+				pr_err("Cannot parse GPIO index %s\n", first);
+				return -EINVAL;
+			}
+
+			if (!last) {
+				b = a;
+			} else if (kstrtouint(last, 10, &b)) {
+				pr_err("Cannot parse GPIO index %s\n", last);
+				return -EINVAL;
+			}
+
+			for (i = a; i <= b; i++) {
+				error = aggr_add_gpio(aggr, name, i, &n);
+				if (error)
+					return error;
+			}
+		}
+
+		name = get_arg(&args);
+	}
+
+	if (!n) {
+		pr_err("No GPIOs specified\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static ssize_t new_device_store(struct device_driver *driver, const char *buf,
+				size_t count)
+{
+	struct gpio_aggregator *aggr;
+	struct platform_device *pdev;
+	int res, id;
+
+	/* kernfs guarantees string termination, so count + 1 is safe */
+	aggr = kzalloc(sizeof(*aggr) + count + 1, GFP_KERNEL);
+	if (!aggr)
+		return -ENOMEM;
+
+	memcpy(aggr->args, buf, count + 1);
+
+	aggr->lookups = kzalloc(struct_size(aggr->lookups, table, 1),
+				GFP_KERNEL);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto free_ga;
+	}
+
+	mutex_lock(&gpio_aggregator_lock);
+	id = idr_alloc(&gpio_aggregator_idr, aggr, 0, 0, GFP_KERNEL);
+	mutex_unlock(&gpio_aggregator_lock);
+
+	if (id < 0) {
+		res = id;
+		goto free_table;
+	}
+
+	aggr->lookups->dev_id = kasprintf(GFP_KERNEL, "%s.%d", DRV_NAME, id);
+	if (!aggr->lookups) {
+		res = -ENOMEM;
+		goto remove_idr;
+	}
+
+	res = aggr_parse(aggr);
+	if (res)
+		goto free_dev_id;
+
+	gpiod_add_lookup_table(aggr->lookups);
+
+	pdev = platform_device_register_simple(DRV_NAME, id, NULL, 0);
+	if (IS_ERR(pdev)) {
+		res = PTR_ERR(pdev);
+		goto remove_table;
+	}
+
+	aggr->pdev = pdev;
+	return count;
+
+remove_table:
+	gpiod_remove_lookup_table(aggr->lookups);
+free_dev_id:
+	kfree(aggr->lookups->dev_id);
+remove_idr:
+	mutex_lock(&gpio_aggregator_lock);
+	idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+free_table:
+	kfree(aggr->lookups);
+free_ga:
+	kfree(aggr);
+	return res;
+}
+
+static DRIVER_ATTR_WO(new_device);
+
+static void gpio_aggregator_free(struct gpio_aggregator *aggr)
+{
+	platform_device_unregister(aggr->pdev);
+	gpiod_remove_lookup_table(aggr->lookups);
+	kfree(aggr->lookups->dev_id);
+	kfree(aggr->lookups);
+	kfree(aggr);
+}
+
+static ssize_t delete_device_store(struct device_driver *driver,
+				   const char *buf, size_t count)
+{
+	struct gpio_aggregator *aggr;
+	unsigned int id;
+	int error;
+
+	if (!str_has_prefix(buf, DRV_NAME "."))
+		return -EINVAL;
+
+	error = kstrtouint(buf + strlen(DRV_NAME "."), 10, &id);
+	if (error)
+		return error;
+
+	mutex_lock(&gpio_aggregator_lock);
+	aggr = idr_remove(&gpio_aggregator_idr, id);
+	mutex_unlock(&gpio_aggregator_lock);
+	if (!aggr)
+		return -ENOENT;
+
+	gpio_aggregator_free(aggr);
+	return count;
+}
+static DRIVER_ATTR_WO(delete_device);
+
+static struct attribute *gpio_aggregator_attrs[] = {
+	&driver_attr_new_device.attr,
+	&driver_attr_delete_device.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(gpio_aggregator);
+
+static int __exit gpio_aggregator_idr_remove(int id, void *p, void *data)
+{
+	gpio_aggregator_free(p);
+	return 0;
+}
+
+static void __exit gpio_aggregator_remove_all(void)
+{
+	mutex_lock(&gpio_aggregator_lock);
+	idr_for_each(&gpio_aggregator_idr, gpio_aggregator_idr_remove, NULL);
+	idr_destroy(&gpio_aggregator_idr);
+	mutex_unlock(&gpio_aggregator_lock);
+}
+
+
+	/*
+	 *  Common GPIO Forwarder
+	 */
+
+struct gpiochip_fwd {
+	struct gpio_chip chip;
+	struct gpio_desc **descs;
+	union {
+		struct mutex mlock;	/* protects tmp[] if can_sleep */
+		spinlock_t slock;	/* protects tmp[] if !can_sleep */
+	};
+	unsigned long tmp[];		/* values and descs for multiple ops */
+};
+
+static int gpio_fwd_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_direction(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_input(fwd->descs[offset]);
+}
+
+static int gpio_fwd_direction_output(struct gpio_chip *chip,
+				     unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_direction_output(fwd->descs[offset], value);
+}
+
+static int gpio_fwd_get(struct gpio_chip *chip, unsigned int offset)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	return gpiod_get_value(fwd->descs[offset]);
+}
+
+static int gpio_fwd_get_multiple(struct gpio_chip *chip, unsigned long *mask,
+				 unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+	int error;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	values = &fwd->tmp[0];
+	bitmap_clear(values, 0, fwd->chip.ngpio);
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio)
+		descs[j++] = fwd->descs[i];
+
+	error = gpiod_get_array_value(j, descs, NULL, values);
+	if (!error) {
+		j = 0;
+		for_each_set_bit(i, mask, fwd->chip.ngpio)
+			__assign_bit(i, bits, test_bit(j++, values));
+	}
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+
+	return error;
+}
+
+static void gpio_fwd_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	gpiod_set_value(fwd->descs[offset], value);
+}
+
+static void gpio_fwd_set_multiple(struct gpio_chip *chip, unsigned long *mask,
+				  unsigned long *bits)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned long *values, flags;
+	struct gpio_desc **descs;
+	unsigned int i, j = 0;
+
+	if (chip->can_sleep)
+		mutex_lock(&fwd->mlock);
+	else
+		spin_lock_irqsave(&fwd->slock, flags);
+
+	values = &fwd->tmp[0];
+	descs = (void *)&fwd->tmp[BITS_TO_LONGS(fwd->chip.ngpio)];
+
+	for_each_set_bit(i, mask, fwd->chip.ngpio) {
+		__assign_bit(j, values, test_bit(i, bits));
+		descs[j++] = fwd->descs[i];
+	}
+
+	gpiod_set_array_value(j, descs, NULL, values);
+
+	if (chip->can_sleep)
+		mutex_unlock(&fwd->mlock);
+	else
+		spin_unlock_irqrestore(&fwd->slock, flags);
+}
+
+static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
+			       unsigned long config)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+
+	chip = fwd->descs[offset]->gdev->chip;
+	if (chip->set_config)
+		return chip->set_config(chip, offset, config);
+
+	return -ENOTSUPP;
+}
+
+static int gpio_fwd_init_valid_mask(struct gpio_chip *chip,
+				    unsigned long *valid_mask,
+				    unsigned int ngpios)
+{
+	struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
+	unsigned int i;
+
+	for (i = 0; i < ngpios; i++) {
+		if (!gpiochip_line_is_valid(fwd->descs[i]->gdev->chip,
+					    gpio_chip_hwgpio(fwd->descs[i])))
+			clear_bit(i, valid_mask);
+	}
+
+	return 0;
+}
+
+/**
+ * gpiochip_fwd_create() - Create a new GPIO forwarder
+ * @dev: Parent device pointer
+ * @ngpios: Number of GPIOs in the forwarder.
+ * @descs: Array containing the GPIO descriptors to forward to.
+ *         This array must contain @ngpios entries, and must not be deallocated
+ *         before the forwarder has been destroyed again.
+ *
+ * This function creates a new gpiochip, which forwards all GPIO operations to
+ * the passed GPIO descriptors.
+ *
+ * Return: An opaque object pointer, or an ERR_PTR()-encoded negative error
+ *         code on failure.
+ */
+static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
+						unsigned int ngpios,
+						struct gpio_desc *descs[])
+{
+	const char *label = dev_name(dev);
+	struct gpiochip_fwd *fwd;
+	struct gpio_chip *chip;
+	unsigned int i;
+	int error;
+
+	fwd = devm_kzalloc(dev, struct_size(fwd, tmp,
+			   BITS_TO_LONGS(ngpios) + ngpios), GFP_KERNEL);
+	if (!fwd)
+		return ERR_PTR(-ENOMEM);
+
+	chip = &fwd->chip;
+
+	for (i = 0; i < ngpios; i++) {
+		dev_dbg(dev, "gpio %u => gpio-%d (%s)\n", i,
+			desc_to_gpio(descs[i]), descs[i]->label ? : "?");
+
+		if (gpiod_cansleep(descs[i]))
+			chip->can_sleep = true;
+		if (descs[i]->gdev->chip->set_config)
+			chip->set_config = gpio_fwd_set_config;
+		if (descs[i]->gdev->chip->init_valid_mask)
+			chip->init_valid_mask = gpio_fwd_init_valid_mask;
+	}
+
+	chip->label = label;
+	chip->parent = dev;
+	chip->owner = THIS_MODULE;
+	chip->get_direction = gpio_fwd_get_direction;
+	chip->direction_input = gpio_fwd_direction_input;
+	chip->direction_output = gpio_fwd_direction_output;
+	chip->get = gpio_fwd_get;
+	chip->get_multiple = gpio_fwd_get_multiple;
+	chip->set = gpio_fwd_set;
+	chip->set_multiple = gpio_fwd_set_multiple;
+	chip->base = -1;
+	chip->ngpio = ngpios;
+	fwd->descs = descs;
+
+	if (chip->can_sleep)
+		mutex_init(&fwd->mlock);
+	else
+		spin_lock_init(&fwd->slock);
+
+	error = devm_gpiochip_add_data(dev, chip, fwd);
+	if (error)
+		return ERR_PTR(error);
+
+	return fwd;
+}
+
+
+	/*
+	 *  Common GPIO Aggregator/Repeater platform device
+	 */
+
+static int gpio_aggregator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct gpio_desc **descs;
+	struct gpiochip_fwd *fwd;
+	int i, n;
+
+	n = gpiod_count(dev, NULL);
+	if (n < 0)
+		return n;
+
+	descs = devm_kmalloc_array(dev, n, sizeof(*descs), GFP_KERNEL);
+	if (!descs)
+		return -ENOMEM;
+
+	for (i = 0; i < n; i++) {
+		descs[i] = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		if (IS_ERR(descs[i]))
+			return PTR_ERR(descs[i]);
+	}
+
+	fwd = gpiochip_fwd_create(dev, n, descs);
+	if (IS_ERR(fwd))
+		return PTR_ERR(fwd);
+
+	platform_set_drvdata(pdev, fwd);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_aggregator_dt_ids[] = {
+	{ .compatible = "gpio-repeater" },
+	/*
+	 * Add GPIO-operated devices controlled from userspace below,
+	 * or use "driver_override" in sysfs
+	 */
+	{},
+};
+MODULE_DEVICE_TABLE(of, gpio_aggregator_dt_ids);
+#endif
+
+static struct platform_driver gpio_aggregator_driver = {
+	.probe = gpio_aggregator_probe,
+	.driver = {
+		.name = DRV_NAME,
+		.groups = gpio_aggregator_groups,
+		.of_match_table = of_match_ptr(gpio_aggregator_dt_ids),
+	},
+};
+
+static int __init gpio_aggregator_init(void)
+{
+	return platform_driver_register(&gpio_aggregator_driver);
+}
+module_init(gpio_aggregator_init);
+
+static void __exit gpio_aggregator_exit(void)
+{
+	gpio_aggregator_remove_all();
+	platform_driver_unregister(&gpio_aggregator_driver);
+}
+module_exit(gpio_aggregator_exit);
+
+MODULE_AUTHOR("Geert Uytterhoeven <geert+renesas@glider.be>");
+MODULE_DESCRIPTION("GPIO Aggregator/Repeater");
+MODULE_LICENSE("GPL v2");
-- 
2.17.1



  parent reply	other threads:[~2019-11-27  8:43 UTC|newest]

Thread overview: 96+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-27  8:42 [PATCH v3 0/7] gpio: Add GPIO Aggregator/Repeater Geert Uytterhoeven
2019-11-27  8:42 ` Geert Uytterhoeven
2019-11-27  8:42 ` [PATCH v3 1/7] gpiolib: Add GPIOCHIP_NAME definition Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-11-28  3:38   ` Ulrich Hecht
2019-11-28  3:38     ` Ulrich Hecht
2019-12-02 21:17   ` Eugeniu Rosca
2019-12-02 21:17     ` Eugeniu Rosca
2019-12-12 10:37   ` Linus Walleij
2019-12-12 10:37     ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 2/7] gpiolib: Add support for gpiochipN-based table lookup Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-11-28  3:38   ` Ulrich Hecht
2019-11-28  3:38     ` Ulrich Hecht
2019-12-12 13:20   ` Linus Walleij
2019-12-12 13:20     ` Linus Walleij
2019-12-12 13:33     ` Geert Uytterhoeven
2019-12-12 13:33       ` Geert Uytterhoeven
2019-12-12 14:36       ` Linus Walleij
2019-12-12 14:36         ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 3/7] gpiolib: Add support for GPIO line " Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-11-28  3:39   ` Ulrich Hecht
2019-11-28  3:39     ` Ulrich Hecht
2019-12-12 13:40   ` Linus Walleij
2019-12-12 13:40     ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 4/7] dt-bindings: gpio: Add gpio-repeater bindings Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-11-28  3:39   ` Ulrich Hecht
2019-11-28  3:39     ` Ulrich Hecht
2019-12-03  5:51   ` Harish Jenny K N
2019-12-03  5:51     ` Harish Jenny K N
2019-12-05 21:06   ` Rob Herring
2019-12-05 21:06     ` Rob Herring
2019-12-06  9:17     ` Geert Uytterhoeven
2019-12-06  9:17       ` Geert Uytterhoeven
2019-12-06 15:03       ` Rob Herring
2019-12-06 15:03         ` Rob Herring
2020-01-06  8:12         ` Geert Uytterhoeven
2020-01-06  8:12           ` Geert Uytterhoeven
2020-01-07  9:22           ` Harish Jenny K N
2020-01-07  9:22             ` Harish Jenny K N
2020-01-16  5:09             ` Harish Jenny K N
2020-01-16  5:09               ` Harish Jenny K N
2019-11-27  8:42 ` Geert Uytterhoeven [this message]
2019-11-27  8:42   ` [PATCH v3 5/7] gpio: Add GPIO Aggregator/Repeater driver Geert Uytterhoeven
2019-11-27 14:15   ` Eugeniu Rosca
2019-11-27 14:15     ` Eugeniu Rosca
2019-11-27 14:33     ` Geert Uytterhoeven
2019-11-27 14:33       ` Geert Uytterhoeven
2019-11-28  3:40   ` Ulrich Hecht
2019-11-28  3:40     ` Ulrich Hecht
2019-12-03  5:42   ` Harish Jenny K N
2019-12-03  5:42     ` Harish Jenny K N
2019-12-03  8:17     ` Geert Uytterhoeven
2019-12-03  8:17       ` Geert Uytterhoeven
2019-12-03  8:51       ` Harish Jenny K N
2019-12-03  8:51         ` Harish Jenny K N
2019-12-03 10:51   ` Eugeniu Rosca
2019-12-03 10:51     ` Eugeniu Rosca
2020-01-09 13:35     ` Geert Uytterhoeven
2020-01-09 13:35       ` Geert Uytterhoeven
2020-01-09 13:49       ` Eugeniu Rosca
2020-01-09 13:49         ` Eugeniu Rosca
2019-12-12 14:34   ` Linus Walleij
2019-12-12 14:34     ` Linus Walleij
2019-12-12 15:24     ` Geert Uytterhoeven
2019-12-12 15:24       ` Geert Uytterhoeven
2020-01-04  0:38       ` Linus Walleij
2020-01-04  0:38         ` Linus Walleij
2020-01-06  8:23         ` Geert Uytterhoeven
2020-01-06  8:23           ` Geert Uytterhoeven
2020-01-08 23:12           ` Linus Walleij
2020-01-08 23:12             ` Linus Walleij
2019-11-27  8:42 ` [PATCH v3 6/7] docs: gpio: Add GPIO Aggregator/Repeater documentation Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-11-28  3:41   ` Ulrich Hecht
2019-11-28  3:41     ` Ulrich Hecht
2019-12-12 14:42   ` Linus Walleij
2019-12-12 14:42     ` Linus Walleij
2019-12-12 14:48     ` Geert Uytterhoeven
2019-12-12 14:48       ` Geert Uytterhoeven
2020-01-04  0:21       ` Linus Walleij
2020-01-04  0:21         ` Linus Walleij
2020-01-06  8:06         ` Geert Uytterhoeven
2020-01-06  8:06           ` Geert Uytterhoeven
2019-11-27  8:42 ` [PATCH v3 7/7] MAINTAINERS: Add GPIO Aggregator/Repeater section Geert Uytterhoeven
2019-11-27  8:42   ` Geert Uytterhoeven
2019-12-03  5:38   ` Harish Jenny K N
2019-12-03  5:38     ` Harish Jenny K N
2020-01-18  1:46 ` [PATCH v3 0/7] gpio: Add GPIO Aggregator/Repeater Eugeniu Rosca
2020-01-18  1:46   ` Eugeniu Rosca
2020-01-20  9:33   ` Geert Uytterhoeven
2020-01-20  9:33     ` Geert Uytterhoeven
2020-01-20 12:14     ` Eugeniu Rosca
2020-01-20 12:14       ` Eugeniu Rosca

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191127084253.16356-6-geert+renesas@glider.be \
    --to=geert+renesas@glider.be \
    --cc=bgolaszewski@baylibre.com \
    --cc=christoffer.dall@arm.com \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=erosca@de.adit-jv.com \
    --cc=graf@amazon.com \
    --cc=harish_kandiga@mentor.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=pbonzini@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=preid@electromag.com.au \
    --cc=qemu-devel@nongnu.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.