From: Al Cooper <alcooperx@gmail.com> To: linux-kernel@vger.kernel.org Cc: Al Cooper <alcooperx@gmail.com>, bcm-kernel-feedback-list@broadcom.com, devicetree@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, Kishon Vijay Abraham I <kishon@ti.com>, linux-arm-kernel@lists.infradead.org, Mark Rutland <mark.rutland@arm.com>, Rob Herring <robh+dt@kernel.org>, Srinath Mannam <srinath.mannam@broadcom.com> Subject: [PATCH v3 00/13] phy: usb: Updates to Broadcom STB USB PHY driver Date: Tue, 10 Dec 2019 08:21:19 -0500 [thread overview] Message-ID: <20191210132132.41509-1-alcooperx@gmail.com> (raw) This patchset contains various updates to the Broadcom STB USB Driver. The updates include: - Add support for 7216 and 7211 Broadcom SoCs which use the new Synopsis USB Controller. - Add support for USB Wake - Add various bug fixes. v3 - Rebase to v5.5-rc1 v2 - Changes based on review feedback - Add vendor prefix to DT property "syscon-piarbctl" - Use standard "wakeup" instead of "wake" for DT "interrupt-names" Al Cooper (13): phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family phy: usb: Get all drivers that use USB clks using correct enable/disable phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode phy: usb: Add "wake on" functionality phy: usb: Restructure in preparation for adding 7216 USB support dt-bindings: Add Broadcom STB USB PHY binding document phy: usb: Add support for new Synopsis USB controller on the 7216 phy: usb: Add support for new Synopsis USB controller on the 7211b0 phy: usb: fix driver to defer on clk_get defer phy: usb: PHY's MDIO registers not accessible without device installed phy: usb: bdc: Fix occasional failure with BDC on 7211 phy: usb: USB driver is crashing during S3 resume on 7216 phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 .../bindings/phy/brcm,brcmstb-usb-phy.txt | 69 ++- drivers/phy/broadcom/Makefile | 2 +- .../phy/broadcom/phy-brcm-usb-init-synopsis.c | 414 ++++++++++++++++++ drivers/phy/broadcom/phy-brcm-usb-init.c | 226 +++++----- drivers/phy/broadcom/phy-brcm-usb-init.h | 148 ++++++- drivers/phy/broadcom/phy-brcm-usb.c | 269 ++++++++++-- 6 files changed, 943 insertions(+), 185 deletions(-) create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsis.c -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Al Cooper <alcooperx@gmail.com> To: linux-kernel@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com>, devicetree@vger.kernel.org, Florian Fainelli <f.fainelli@gmail.com>, Al Cooper <alcooperx@gmail.com>, Kishon Vijay Abraham I <kishon@ti.com>, Rob Herring <robh+dt@kernel.org>, bcm-kernel-feedback-list@broadcom.com, Srinath Mannam <srinath.mannam@broadcom.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 00/13] phy: usb: Updates to Broadcom STB USB PHY driver Date: Tue, 10 Dec 2019 08:21:19 -0500 [thread overview] Message-ID: <20191210132132.41509-1-alcooperx@gmail.com> (raw) This patchset contains various updates to the Broadcom STB USB Driver. The updates include: - Add support for 7216 and 7211 Broadcom SoCs which use the new Synopsis USB Controller. - Add support for USB Wake - Add various bug fixes. v3 - Rebase to v5.5-rc1 v2 - Changes based on review feedback - Add vendor prefix to DT property "syscon-piarbctl" - Use standard "wakeup" instead of "wake" for DT "interrupt-names" Al Cooper (13): phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family phy: usb: Get all drivers that use USB clks using correct enable/disable phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode phy: usb: Add "wake on" functionality phy: usb: Restructure in preparation for adding 7216 USB support dt-bindings: Add Broadcom STB USB PHY binding document phy: usb: Add support for new Synopsis USB controller on the 7216 phy: usb: Add support for new Synopsis USB controller on the 7211b0 phy: usb: fix driver to defer on clk_get defer phy: usb: PHY's MDIO registers not accessible without device installed phy: usb: bdc: Fix occasional failure with BDC on 7211 phy: usb: USB driver is crashing during S3 resume on 7216 phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 .../bindings/phy/brcm,brcmstb-usb-phy.txt | 69 ++- drivers/phy/broadcom/Makefile | 2 +- .../phy/broadcom/phy-brcm-usb-init-synopsis.c | 414 ++++++++++++++++++ drivers/phy/broadcom/phy-brcm-usb-init.c | 226 +++++----- drivers/phy/broadcom/phy-brcm-usb-init.h | 148 ++++++- drivers/phy/broadcom/phy-brcm-usb.c | 269 ++++++++++-- 6 files changed, 943 insertions(+), 185 deletions(-) create mode 100644 drivers/phy/broadcom/phy-brcm-usb-init-synopsis.c -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2019-12-10 13:23 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2019-12-10 13:21 Al Cooper [this message] 2019-12-10 13:21 ` [PATCH v3 00/13] phy: usb: Updates to Broadcom STB USB PHY driver Al Cooper 2019-12-10 13:21 ` [PATCH v3 01/13] phy: usb: EHCI DMA may lose a burst of DMA data for 7255xA0 family Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 02/13] phy: usb: Get all drivers that use USB clks using correct enable/disable Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 03/13] phy: usb: Put USB phys into IDDQ on suspend to save power in S2 mode Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 04/13] phy: usb: Add "wake on" functionality Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 05/13] phy: usb: Restructure in preparation for adding 7216 USB support Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 06/13] dt-bindings: Add Broadcom STB USB PHY binding document Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-13 19:10 ` Rob Herring 2019-12-13 19:10 ` Rob Herring 2019-12-10 13:21 ` [PATCH v3 07/13] phy: usb: Add support for new Synopsis USB controller on the 7216 Al Cooper 2019-12-10 13:21 ` Al Cooper 2020-01-03 9:33 ` Kishon Vijay Abraham I 2020-01-03 9:33 ` Kishon Vijay Abraham I 2020-01-03 13:06 ` Alan Cooper 2020-01-03 13:06 ` Alan Cooper 2019-12-10 13:21 ` [PATCH v3 08/13] phy: usb: Add support for new Synopsis USB controller on the 7211b0 Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 09/13] phy: usb: fix driver to defer on clk_get defer Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 10/13] phy: usb: PHY's MDIO registers not accessible without device installed Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 11/13] phy: usb: bdc: Fix occasional failure with BDC on 7211 Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 12/13] phy: usb: USB driver is crashing during S3 resume on 7216 Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-10 13:21 ` [PATCH v3 13/13] phy: usb: Add support for wake and USB low power mode for 7211 S2/S5 Al Cooper 2019-12-10 13:21 ` Al Cooper 2019-12-13 19:25 ` [PATCH v3 00/13] phy: usb: Updates to Broadcom STB USB PHY driver Florian Fainelli 2019-12-13 19:25 ` Florian Fainelli 2019-12-31 17:41 ` Florian Fainelli 2019-12-31 17:41 ` Florian Fainelli
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20191210132132.41509-1-alcooperx@gmail.com \ --to=alcooperx@gmail.com \ --cc=bcm-kernel-feedback-list@broadcom.com \ --cc=devicetree@vger.kernel.org \ --cc=f.fainelli@gmail.com \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=srinath.mannam@broadcom.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.