All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
To: Jonathan Cameron <jic23@kernel.org>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Subject: [PATCH 3/9] iio: imu: inv_mpu6050: add support of ICM20609 & ICM20689
Date: Mon, 20 Jan 2020 10:36:14 +0100	[thread overview]
Message-ID: <20200120093620.9681-4-jmaneyrol@invensense.com> (raw)
In-Reply-To: <20200120093620.9681-1-jmaneyrol@invensense.com>

They are similar to ICM20608 chip.

Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
---
 drivers/iio/imu/inv_mpu6050/Kconfig        |  8 +++----
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 26 ++++++++++++++++++----
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c  | 12 ++++++++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h  |  5 +++++
 drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c  | 10 +++++++++
 5 files changed, 53 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/imu/inv_mpu6050/Kconfig b/drivers/iio/imu/inv_mpu6050/Kconfig
index 003134734646..e933db3a5a89 100644
--- a/drivers/iio/imu/inv_mpu6050/Kconfig
+++ b/drivers/iio/imu/inv_mpu6050/Kconfig
@@ -16,8 +16,8 @@ config INV_MPU6050_I2C
 	select REGMAP_I2C
 	help
 	  This driver supports the Invensense MPU6050/9150,
-	  MPU6500/6515/9250/9255, ICM20608 and ICM20602 motion tracking devices
-	  over I2C.
+	  MPU6500/6515/9250/9255, ICM20608/20609/20689 and ICM20602
+	  motion tracking devices over I2C.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-i2c.
 
@@ -28,7 +28,7 @@ config INV_MPU6050_SPI
 	select REGMAP_SPI
 	help
 	  This driver supports the Invensense MPU6000,
-	  MPU6500/6515/9250/9255, ICM20608 and ICM20602 motion tracking devices
-	  over SPI.
+	  MPU6500/6515/9250/9255, ICM20608/20609/20689 and ICM20602
+	  motion tracking devices over SPI.
 	  This driver can be built as a module. The module will be called
 	  inv-mpu6050-spi.
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
index 5096fc49012d..5fd57a1bee90 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c
@@ -176,6 +176,22 @@ static const struct inv_mpu6050_hw hw_info[] = {
 		.fifo_size = 512,
 		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
 	},
+	{
+		.whoami = INV_ICM20609_WHOAMI_VALUE,
+		.name = "ICM20609",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6050,
+		.fifo_size = 4 * 1024,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+	},
+	{
+		.whoami = INV_ICM20689_WHOAMI_VALUE,
+		.name = "ICM20689",
+		.reg = &reg_set_6500,
+		.config = &chip_config_6050,
+		.fifo_size = 4 * 1024,
+		.temp = {INV_ICM20608_TEMP_OFFSET, INV_ICM20608_TEMP_SCALE},
+	},
 	{
 		.whoami = INV_ICM20602_WHOAMI_VALUE,
 		.name = "ICM20602",
@@ -286,20 +302,22 @@ static int inv_mpu6050_set_lpf_regs(struct inv_mpu6050_state *st,
 	if (result)
 		return result;
 
+	/* set accel lpf */
 	switch (st->chip_type) {
 	case INV_MPU6050:
 	case INV_MPU6000:
 	case INV_MPU9150:
 		/* old chips, nothing to do */
-		result = 0;
+		return 0;
+	case INV_ICM20689:
+		/* set FIFO size to maximum value */
+		val |= INV_ICM20689_BITS_FIFO_SIZE_MAX;
 		break;
 	default:
-		/* set accel lpf */
-		result = regmap_write(st->map, st->reg->accel_lpf, val);
 		break;
 	}
 
-	return result;
+	return regmap_write(st->map, st->reg->accel_lpf, val);
 }
 
 /**
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
index f47a28b4be23..c2b5621edadb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c
@@ -74,6 +74,8 @@ static bool inv_mpu_i2c_aux_bus(struct device *dev)
 
 	switch (st->chip_type) {
 	case INV_ICM20608:
+	case INV_ICM20609:
+	case INV_ICM20689:
 	case INV_ICM20602:
 		/* no i2c auxiliary bus on the chip */
 		return false;
@@ -218,6 +220,8 @@ static const struct i2c_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20609", INV_ICM20609},
+	{"icm20689", INV_ICM20689},
 	{"icm20602", INV_ICM20602},
 	{}
 };
@@ -253,6 +257,14 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20609",
+		.data = (void *)INV_ICM20609
+	},
+	{
+		.compatible = "invensense,icm20689",
+		.data = (void *)INV_ICM20689
+	},
 	{
 		.compatible = "invensense,icm20602",
 		.data = (void *)INV_ICM20602
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
index 6158fca7f70e..75b8903450eb 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h
@@ -75,6 +75,8 @@ enum inv_devices {
 	INV_MPU9250,
 	INV_MPU9255,
 	INV_ICM20608,
+	INV_ICM20609,
+	INV_ICM20689,
 	INV_ICM20602,
 	INV_NUM_PARTS
 };
@@ -276,6 +278,7 @@ struct inv_mpu6050_state {
 
 /* mpu6500 registers */
 #define INV_MPU6500_REG_ACCEL_CONFIG_2      0x1D
+#define INV_ICM20689_BITS_FIFO_SIZE_MAX     0xC0
 #define INV_MPU6500_REG_ACCEL_OFFSET        0x77
 
 /* delay time in milliseconds */
@@ -340,6 +343,8 @@ struct inv_mpu6050_state {
 #define INV_MPU9255_WHOAMI_VALUE		0x73
 #define INV_MPU6515_WHOAMI_VALUE		0x74
 #define INV_ICM20608_WHOAMI_VALUE		0xAF
+#define INV_ICM20609_WHOAMI_VALUE		0xA6
+#define INV_ICM20689_WHOAMI_VALUE		0x98
 #define INV_ICM20602_WHOAMI_VALUE		0x12
 
 /* scan element definition for generic MPU6xxx devices */
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
index f7276f9d83fc..189df8bae7b4 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_spi.c
@@ -78,6 +78,8 @@ static const struct spi_device_id inv_mpu_id[] = {
 	{"mpu9250", INV_MPU9250},
 	{"mpu9255", INV_MPU9255},
 	{"icm20608", INV_ICM20608},
+	{"icm20609", INV_ICM20609},
+	{"icm20689", INV_ICM20689},
 	{"icm20602", INV_ICM20602},
 	{}
 };
@@ -109,6 +111,14 @@ static const struct of_device_id inv_of_match[] = {
 		.compatible = "invensense,icm20608",
 		.data = (void *)INV_ICM20608
 	},
+	{
+		.compatible = "invensense,icm20609",
+		.data = (void *)INV_ICM20609
+	},
+	{
+		.compatible = "invensense,icm20689",
+		.data = (void *)INV_ICM20689
+	},
 	{
 		.compatible = "invensense,icm20602",
 		.data = (void *)INV_ICM20602
-- 
2.17.1


  parent reply	other threads:[~2020-01-20  9:47 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-20  9:36 [PATCH 0/9] Add support of similar chips Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 1/9] dt-bindings: iio: imu: inv_mpu6050: add missing entry for mpu6000 Jean-Baptiste Maneyrol
2020-01-31 14:37   ` Rob Herring
2020-01-20  9:36 ` [PATCH 2/9] iio: imu: inv_mpu6050: cleanup spi support Jean-Baptiste Maneyrol
2020-02-01 16:16   ` Jonathan Cameron
2020-01-20  9:36 ` Jean-Baptiste Maneyrol [this message]
2020-01-20  9:36 ` [PATCH 4/9] dt-bindings: add description for icm20609 and icm20689 Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 5/9] iio: imu: inv_mpu6050: add support of IAM20680 Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 6/9] dt-bindings: add description for iam20680 Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 7/9] iio: imu: inv_mpu6050: add support of ICM20690 Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 8/9] dt-bindings: add description for icm20690 Jean-Baptiste Maneyrol
2020-01-20  9:36 ` [PATCH 9/9] iio: imu: inv_mpu6050: fix LPF bandwidth setting Jean-Baptiste Maneyrol
2020-02-01 16:23   ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200120093620.9681-4-jmaneyrol@invensense.com \
    --to=jmaneyrol@invensense.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.