All of lore.kernel.org
 help / color / mirror / Atom feed
From: Faiz Abbas <faiz_abbas@ti.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	netdev@vger.kernel.org, linux-can@vger.kernel.org
Cc: mark.rutland@arm.com, nm@ti.com, catalin.marinas@arm.com,
	sriram.dash@samsung.com, faiz_abbas@ti.com, t-kristo@ti.com,
	robh+dt@kernel.org, mkl@pengutronix.de, dmurphy@ti.com,
	davem@davemloft.net, wg@grandegger.com
Subject: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
Date: Wed, 22 Jan 2020 13:33:08 +0530	[thread overview]
Message-ID: <20200122080310.24653-2-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200122080310.24653-1-faiz_abbas@ti.com>

The CAN transceiver on some boards has an STB pin which is
used to control its standby mode. Add an optional property
stb-gpios to toggle the same.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..cc8ba3f7a2aa 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -48,6 +48,8 @@ Optional Subnode:
 			  that can be used for CAN/CAN-FD modes. See
 			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
 			  for details.
+stb-gpios		: gpio node to toggle the STB (standby) signal on the transceiver
+
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
-- 
2.19.2

WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<netdev@vger.kernel.org>, <linux-can@vger.kernel.org>
Cc: <catalin.marinas@arm.com>, <mark.rutland@arm.com>,
	<robh+dt@kernel.org>, <davem@davemloft.net>, <mkl@pengutronix.de>,
	<wg@grandegger.com>, <sriram.dash@samsung.com>, <dmurphy@ti.com>,
	<faiz_abbas@ti.com>, <nm@ti.com>, <t-kristo@ti.com>
Subject: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
Date: Wed, 22 Jan 2020 13:33:08 +0530	[thread overview]
Message-ID: <20200122080310.24653-2-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200122080310.24653-1-faiz_abbas@ti.com>

The CAN transceiver on some boards has an STB pin which is
used to control its standby mode. Add an optional property
stb-gpios to toggle the same.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..cc8ba3f7a2aa 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -48,6 +48,8 @@ Optional Subnode:
 			  that can be used for CAN/CAN-FD modes. See
 			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
 			  for details.
+stb-gpios		: gpio node to toggle the STB (standby) signal on the transceiver
+
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
-- 
2.19.2


WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com>
To: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<netdev@vger.kernel.org>, <linux-can@vger.kernel.org>
Cc: mark.rutland@arm.com, nm@ti.com, catalin.marinas@arm.com,
	sriram.dash@samsung.com, faiz_abbas@ti.com, t-kristo@ti.com,
	robh+dt@kernel.org, mkl@pengutronix.de, dmurphy@ti.com,
	davem@davemloft.net, wg@grandegger.com
Subject: [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios
Date: Wed, 22 Jan 2020 13:33:08 +0530	[thread overview]
Message-ID: <20200122080310.24653-2-faiz_abbas@ti.com> (raw)
In-Reply-To: <20200122080310.24653-1-faiz_abbas@ti.com>

The CAN transceiver on some boards has an STB pin which is
used to control its standby mode. Add an optional property
stb-gpios to toggle the same.

Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
---
 Documentation/devicetree/bindings/net/can/m_can.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt
index ed614383af9c..cc8ba3f7a2aa 100644
--- a/Documentation/devicetree/bindings/net/can/m_can.txt
+++ b/Documentation/devicetree/bindings/net/can/m_can.txt
@@ -48,6 +48,8 @@ Optional Subnode:
 			  that can be used for CAN/CAN-FD modes. See
 			  Documentation/devicetree/bindings/net/can/can-transceiver.txt
 			  for details.
+stb-gpios		: gpio node to toggle the STB (standby) signal on the transceiver
+
 Example:
 SoC dtsi:
 m_can1: can@20e8000 {
-- 
2.19.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-01-22  8:03 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-22  8:03 [PATCH 0/3] Add Support for MCAN in AM654x-idk Faiz Abbas
2020-01-22  8:03 ` Faiz Abbas
2020-01-22  8:03 ` Faiz Abbas
2020-01-22  8:03 ` Faiz Abbas [this message]
2020-01-22  8:03   ` [PATCH 1/3] dt-bindings: net: can: m_can: Add Documentation for stb-gpios Faiz Abbas
2020-01-22  8:03   ` Faiz Abbas
2020-01-22 13:35   ` Dan Murphy
2020-01-22 13:35     ` Dan Murphy
2020-01-22 13:35     ` Dan Murphy
2020-01-22 14:24     ` Sekhar Nori
2020-01-22 14:24       ` Sekhar Nori
2020-01-22 14:24       ` Sekhar Nori
2020-01-22 14:34       ` Dan Murphy
2020-01-22 14:34         ` Dan Murphy
2020-01-22 14:34         ` Dan Murphy
2020-01-23  7:39         ` Faiz Abbas
2020-01-23  7:39           ` Faiz Abbas
2020-01-23  7:39           ` Faiz Abbas
     [not found]           ` <57baeedc-9f51-7b92-f190-c0bbd8525a16-l0cyMroinI0@public.gmane.org>
2020-02-03 12:06             ` Rob Herring
2020-02-03 12:06               ` Rob Herring
2020-02-03 12:06               ` Rob Herring
2020-02-17 13:53               ` Faiz Abbas
2020-02-17 13:53                 ` Faiz Abbas
2020-01-22  8:03 ` [PATCH 2/3] can: m_can: m_can_platform: Add support for enabling transceiver through the STB line Faiz Abbas
2020-01-22  8:03   ` Faiz Abbas
2020-01-22  8:03   ` Faiz Abbas
     [not found]   ` <20200122080310.24653-3-faiz_abbas-l0cyMroinI0@public.gmane.org>
2020-01-22 14:53     ` Sriram Dash
2020-01-22 14:53       ` Sriram Dash
2020-01-22 14:53       ` Sriram Dash
2020-01-22  8:03 ` [PATCH 3/3] arm64: defconfig: Add Support for Bosch M_CAN controllers Faiz Abbas
2020-01-22  8:03   ` Faiz Abbas
2020-01-22  8:03   ` Faiz Abbas
2020-01-23 11:17 ` [PATCH 0/3] Add Support for MCAN in AM654x-idk Marc Kleine-Budde
2020-01-23 11:17   ` Marc Kleine-Budde
2020-01-23 11:46   ` Faiz Abbas
2020-01-23 11:46     ` Faiz Abbas
2020-01-23 11:46     ` Faiz Abbas
2020-01-23 11:54     ` Marc Kleine-Budde
2020-01-23 11:54       ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200122080310.24653-2-faiz_abbas@ti.com \
    --to=faiz_abbas@ti.com \
    --cc=catalin.marinas@arm.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=dmurphy@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sriram.dash@samsung.com \
    --cc=t-kristo@ti.com \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.