All of lore.kernel.org
 help / color / mirror / Atom feed
From: Johannes Thumshirn <johannes.thumshirn@wdc.com>
To: David Sterba <dsterba@suse.com>
Cc: Nikolay Borisov <nborisov@suse.com>,
	"linux-btrfs @ vger . kernel . org" <linux-btrfs@vger.kernel.org>,
	Johannes Thumshirn <johannes.thumshirn@wdc.com>
Subject: [PATCH v2 3/6] btrfs: remove use of buffer_heads from superblock writeout
Date: Thu, 23 Jan 2020 17:18:46 +0900	[thread overview]
Message-ID: <20200123081849.23397-4-johannes.thumshirn@wdc.com> (raw)
In-Reply-To: <20200123081849.23397-1-johannes.thumshirn@wdc.com>

Similar to the superblock read path, change the write path to using BIOs
and pages instead of buffer_heads. This allows us to skip over the
buffer_head code, for writing the superblock to disk.

This is based on a patch originally authored by Nikolay Borisov.

Co-developed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>

---
Changes to v1:
- Remove left-over buffer_head.h include (David)
---
 fs/btrfs/disk-io.c | 111 ++++++++++++++++++++++++++-------------------
 1 file changed, 64 insertions(+), 47 deletions(-)

diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index b111f32108cc..ac1755793596 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -7,7 +7,6 @@
 #include <linux/blkdev.h>
 #include <linux/radix-tree.h>
 #include <linux/writeback.h>
-#include <linux/buffer_head.h>
 #include <linux/workqueue.h>
 #include <linux/kthread.h>
 #include <linux/slab.h>
@@ -3356,25 +3355,33 @@ int __cold open_ctree(struct super_block *sb,
 }
 ALLOW_ERROR_INJECTION(open_ctree, ERRNO);
 
-static void btrfs_end_buffer_write_sync(struct buffer_head *bh, int uptodate)
+static void btrfs_end_super_write(struct bio *bio)
 {
-	if (uptodate) {
-		set_buffer_uptodate(bh);
-	} else {
-		struct btrfs_device *device = (struct btrfs_device *)
-			bh->b_private;
-
-		btrfs_warn_rl_in_rcu(device->fs_info,
-				"lost page write due to IO error on %s",
-					  rcu_str_deref(device->name));
-		/* note, we don't set_buffer_write_io_error because we have
-		 * our own ways of dealing with the IO errors
-		 */
-		clear_buffer_uptodate(bh);
-		btrfs_dev_stat_inc_and_print(device, BTRFS_DEV_STAT_WRITE_ERRS);
+	struct btrfs_device *device = bio->bi_private;
+	struct bio_vec *bvec;
+	struct bvec_iter_all iter_all;
+	struct page *page;
+
+	bio_for_each_segment_all(bvec, bio, iter_all) {
+		page = bvec->bv_page;
+
+		if (blk_status_to_errno(bio->bi_status)) {
+			btrfs_warn_rl_in_rcu(device->fs_info,
+					     "lost page write due to IO error on %s",
+					     rcu_str_deref(device->name));
+			ClearPageUptodate(page);
+			SetPageError(page);
+			btrfs_dev_stat_inc_and_print(device,
+						     BTRFS_DEV_STAT_WRITE_ERRS);
+		} else {
+			SetPageUptodate(page);
+		}
+
+		put_page(page);
+		unlock_page(page);
 	}
-	unlock_buffer(bh);
-	put_bh(bh);
+
+	bio_put(bio);
 }
 
 int btrfs_read_dev_one_super(struct block_device *bdev, int copy_num,
@@ -3475,16 +3482,16 @@ int btrfs_read_dev_super(struct block_device *bdev, struct page **page)
  * the expected device size at commit time. Note that max_mirrors must be
  * same for write and wait phases.
  *
- * Return number of errors when buffer head is not found or submission fails.
+ * Return number of errors when page is not found or submission fails.
  */
 static int write_dev_supers(struct btrfs_device *device,
 			    struct btrfs_super_block *sb, int max_mirrors)
 {
 	struct btrfs_fs_info *fs_info = device->fs_info;
+	struct address_space *mapping = device->bdev->bd_inode->i_mapping;
 	SHASH_DESC_ON_STACK(shash, fs_info->csum_shash);
-	struct buffer_head *bh;
+	gfp_t gfp_mask;
 	int i;
-	int ret;
 	int errors = 0;
 	u64 bytenr;
 	int op_flags;
@@ -3494,7 +3501,13 @@ static int write_dev_supers(struct btrfs_device *device,
 
 	shash->tfm = fs_info->csum_shash;
 
+	gfp_mask = mapping_gfp_constraint(mapping, ~__GFP_FS) | __GFP_NOFAIL;
+
 	for (i = 0; i < max_mirrors; i++) {
+		struct page *page;
+		struct bio *bio;
+		u8 *ptr;
+
 		bytenr = btrfs_sb_offset(i);
 		if (bytenr + BTRFS_SUPER_INFO_SIZE >=
 		    device->commit_total_bytes)
@@ -3507,26 +3520,22 @@ static int write_dev_supers(struct btrfs_device *device,
 				    BTRFS_SUPER_INFO_SIZE - BTRFS_CSUM_SIZE);
 		crypto_shash_final(shash, sb->csum);
 
-		/* One reference for us, and we leave it for the caller */
-		bh = __getblk(device->bdev, bytenr / BTRFS_BDEV_BLOCKSIZE,
-			      BTRFS_SUPER_INFO_SIZE);
-		if (!bh) {
+		page = find_or_create_page(mapping, bytenr >> PAGE_SHIFT,
+					   gfp_mask);
+		if (!page) {
 			btrfs_err(device->fs_info,
-			    "couldn't get super buffer head for bytenr %llu",
+			    "couldn't get superblock page for bytenr %llu",
 			    bytenr);
 			errors++;
 			continue;
 		}
 
-		memcpy(bh->b_data, sb, BTRFS_SUPER_INFO_SIZE);
-
-		/* one reference for submit_bh */
-		get_bh(bh);
+		/* Bump the refcount for wait_dev_supers() */
+		get_page(page);
 
-		set_buffer_uptodate(bh);
-		lock_buffer(bh);
-		bh->b_end_io = btrfs_end_buffer_write_sync;
-		bh->b_private = device;
+		ptr = kmap(page);
+		memcpy(ptr, sb, BTRFS_SUPER_INFO_SIZE);
+		kunmap(page);
 
 		/*
 		 * we fua the first super.  The others we allow
@@ -3535,9 +3544,17 @@ static int write_dev_supers(struct btrfs_device *device,
 		op_flags = REQ_SYNC | REQ_META | REQ_PRIO;
 		if (i == 0 && !btrfs_test_opt(device->fs_info, NOBARRIER))
 			op_flags |= REQ_FUA;
-		ret = btrfsic_submit_bh(REQ_OP_WRITE, op_flags, bh);
-		if (ret)
-			errors++;
+
+		bio = bio_alloc(gfp_mask, 1);
+		bio_set_dev(bio, device->bdev);
+		bio->bi_iter.bi_sector = bytenr >> SECTOR_SHIFT;
+		bio->bi_private = device;
+		bio->bi_end_io = btrfs_end_super_write;
+		bio_add_page(bio, page, BTRFS_SUPER_INFO_SIZE,
+			     offset_in_page(bytenr));
+
+		bio_set_op_attrs(bio, REQ_OP_WRITE, op_flags);
+		btrfsic_submit_bio(bio);
 	}
 	return errors < i ? 0 : -1;
 }
@@ -3546,12 +3563,11 @@ static int write_dev_supers(struct btrfs_device *device,
  * Wait for write completion of superblocks done by write_dev_supers,
  * @max_mirrors same for write and wait phases.
  *
- * Return number of errors when buffer head is not found or not marked up to
+ * Return number of errors when page is not found or not marked up to
  * date.
  */
 static int wait_dev_supers(struct btrfs_device *device, int max_mirrors)
 {
-	struct buffer_head *bh;
 	int i;
 	int errors = 0;
 	bool primary_failed = false;
@@ -3561,32 +3577,33 @@ static int wait_dev_supers(struct btrfs_device *device, int max_mirrors)
 		max_mirrors = BTRFS_SUPER_MIRROR_MAX;
 
 	for (i = 0; i < max_mirrors; i++) {
+		struct page *page;
+
 		bytenr = btrfs_sb_offset(i);
 		if (bytenr + BTRFS_SUPER_INFO_SIZE >=
 		    device->commit_total_bytes)
 			break;
 
-		bh = __find_get_block(device->bdev,
-				      bytenr / BTRFS_BDEV_BLOCKSIZE,
-				      BTRFS_SUPER_INFO_SIZE);
-		if (!bh) {
+		page = find_get_page(device->bdev->bd_inode->i_mapping,
+				     bytenr >> PAGE_SHIFT);
+		if (!page) {
 			errors++;
 			if (i == 0)
 				primary_failed = true;
 			continue;
 		}
-		wait_on_buffer(bh);
-		if (!buffer_uptodate(bh)) {
+		wait_on_page_locked(page);
+		if (PageError(page)) {
 			errors++;
 			if (i == 0)
 				primary_failed = true;
 		}
 
 		/* drop our reference */
-		brelse(bh);
+		put_page(page);
 
 		/* drop the reference from the writing run */
-		brelse(bh);
+		put_page(page);
 	}
 
 	/* log error, force error return */
-- 
2.24.1


  parent reply	other threads:[~2020-01-23  8:19 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-23  8:18 [PATCH v2 0/6] btrfs: remove buffer heads form superblock handling Johannes Thumshirn
2020-01-23  8:18 ` [PATCH v2 1/6] btrfs: export btrfs_release_disk_super Johannes Thumshirn
2020-01-23 13:42   ` Josef Bacik
2020-01-23  8:18 ` [PATCH v2 2/6] btrfs: remove buffer heads from super block reading Johannes Thumshirn
2020-01-23 13:51   ` Josef Bacik
2020-01-23 13:53     ` Johannes Thumshirn
2020-01-23 14:13   ` Nikolay Borisov
2020-01-23 16:45     ` Johannes Thumshirn
2020-01-23 22:25   ` David Sterba
2020-01-24 13:54   ` David Sterba
2020-01-24 14:03   ` David Sterba
2020-01-23  8:18 ` Johannes Thumshirn [this message]
2020-01-23 13:59   ` [PATCH v2 3/6] btrfs: remove use of buffer_heads from superblock writeout Josef Bacik
2020-01-23 14:19   ` Nikolay Borisov
2020-01-24 14:15   ` David Sterba
2020-01-23  8:18 ` [PATCH v2 4/6] btrfs: remove btrfsic_submit_bh() Johannes Thumshirn
2020-01-23 14:00   ` Josef Bacik
2020-01-23  8:18 ` [PATCH v2 5/6] btrfs: remove buffer_heads from btrfsic_process_written_block() Johannes Thumshirn
2020-01-23 14:00   ` Josef Bacik
2020-01-23  8:18 ` [PATCH v2 6/6] btrfs: remove buffer_heads form superblock mirror integrity checking Johannes Thumshirn
2020-01-23 14:03   ` Josef Bacik
2020-01-23 14:23   ` Nikolay Borisov
2020-01-24 14:22   ` David Sterba
2020-01-24 14:59     ` Johannes Thumshirn

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200123081849.23397-4-johannes.thumshirn@wdc.com \
    --to=johannes.thumshirn@wdc.com \
    --cc=dsterba@suse.com \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=nborisov@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.