From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Guenter Roeck" <linux@roeck-us.net>,
"Lee Jones" <lee.jones@linaro.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Jason Cooper" <jason@lakedaemon.net>,
"Marc Zyngier" <maz@kernel.org>,
"Mark Brown" <broonie@kernel.org>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Michael Walle" <michael@walle.cc>
Subject: [PATCH v2 16/16] arm64: dts: freescale: sl28: enable fan support
Date: Thu, 2 Apr 2020 22:36:56 +0200 [thread overview]
Message-ID: <20200402203656.27047-17-michael@walle.cc> (raw)
In-Reply-To: <20200402203656.27047-1-michael@walle.cc>
Add a pwm-fan mapped to the PWM channel 0 which is connected to the
fan connector of the carrier.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index 0973a6a45217..c45d7b40e374 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -15,6 +15,15 @@
compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
"kontron,sl28", "fsl,ls1028a";
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ pwms = <&sl28cpld_pwm0 0 4000000>;
+ cooling-levels = <1 128 192 255>;
+ };
+
sound {
#address-cells = <1>;
#size-cells = <0>;
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael-QKn5cuLxLXY@public.gmane.org>
To: linux-gpio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-hwmon-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: "Linus Walleij"
<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Bartosz Golaszewski"
<bgolaszewski-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Rob Herring" <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Jean Delvare" <jdelvare-IBi9RG/b67k@public.gmane.org>,
"Guenter Roeck" <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>,
"Lee Jones" <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Thierry Reding"
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
"Uwe Kleine-König"
<u.kleine-koenig-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
"Wim Van Sebroeck"
<wim-Q8PRGTgFL9WUCWQAtAn6Ix2eb7JE58TQ@public.gmane.org>,
"Shawn Guo" <shawnguo-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Li Yang" <leoyang.li-3arQi8VN3Tc@public.gmane.org>,
"Thomas Gleixner" <tglx-hfZtesqFncYOwBW4kG4KsQ@public.gmane.org>,
"Jason Cooper" <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
"Marc Zyngier" <maz-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Mark Brown" <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
"Greg Kroah-Hartman"
<gregkh-hQyY1W1yCW8ekmWlsbkhG0B+6BGkLq7r@public.gmane.org>,
"Michael Walle" <michael-QKn5cuLxLXY@public.gmane.org>
Subject: [PATCH v2 16/16] arm64: dts: freescale: sl28: enable fan support
Date: Thu, 2 Apr 2020 22:36:56 +0200 [thread overview]
Message-ID: <20200402203656.27047-17-michael@walle.cc> (raw)
In-Reply-To: <20200402203656.27047-1-michael-QKn5cuLxLXY@public.gmane.org>
Add a pwm-fan mapped to the PWM channel 0 which is connected to the
fan connector of the carrier.
Signed-off-by: Michael Walle <michael-QKn5cuLxLXY@public.gmane.org>
---
.../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index 0973a6a45217..c45d7b40e374 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -15,6 +15,15 @@
compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
"kontron,sl28", "fsl,ls1028a";
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ pwms = <&sl28cpld_pwm0 0 4000000>;
+ cooling-levels = <1 128 192 255>;
+ };
+
sound {
#address-cells = <1>;
#size-cells = <0>;
--
2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Cc: "Marc Zyngier" <maz@kernel.org>,
"Jean Delvare" <jdelvare@suse.com>,
"Jason Cooper" <jason@lakedaemon.net>,
"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
"Shawn Guo" <shawnguo@kernel.org>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Li Yang" <leoyang.li@nxp.com>,
"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
"Michael Walle" <michael@walle.cc>,
"Rob Herring" <robh+dt@kernel.org>,
"Thierry Reding" <thierry.reding@gmail.com>,
"Mark Brown" <broonie@kernel.org>,
"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
"Thomas Gleixner" <tglx@linutronix.de>,
"Wim Van Sebroeck" <wim@linux-watchdog.org>,
"Lee Jones" <lee.jones@linaro.org>,
"Guenter Roeck" <linux@roeck-us.net>
Subject: [PATCH v2 16/16] arm64: dts: freescale: sl28: enable fan support
Date: Thu, 2 Apr 2020 22:36:56 +0200 [thread overview]
Message-ID: <20200402203656.27047-17-michael@walle.cc> (raw)
In-Reply-To: <20200402203656.27047-1-michael@walle.cc>
Add a pwm-fan mapped to the PWM channel 0 which is connected to the
fan connector of the carrier.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index 0973a6a45217..c45d7b40e374 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -15,6 +15,15 @@
compatible = "kontron,sl28-var3-ads2", "kontron,sl28-var3",
"kontron,sl28", "fsl,ls1028a";
+ pwm-fan {
+ compatible = "pwm-fan";
+ cooling-min-state = <0>;
+ cooling-max-state = <3>;
+ #cooling-cells = <2>;
+ pwms = <&sl28cpld_pwm0 0 4000000>;
+ cooling-levels = <1 128 192 255>;
+ };
+
sound {
#address-cells = <1>;
#size-cells = <0>;
--
2.20.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-04-02 20:37 UTC|newest]
Thread overview: 106+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-02 20:36 [PATCH v2 00/16] Add support for Kontron sl28cpld Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 01/16] include/linux/ioport.h: add helper to define REG resource constructs Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 02/16] mfd: mfd-core: Don't overwrite the dma_mask of the child device Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 03/16] mfd: mfd-core: match device tree node against reg property Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 04/16] regmap-irq: make it possible to add irq_chip do a specific device node Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-14 15:37 ` Applied "regmap-irq: make it possible to add irq_chip do a specific device node" to the regmap tree Mark Brown
2020-04-14 15:37 ` Mark Brown
2020-04-14 15:37 ` Mark Brown
2020-04-14 17:12 ` [PATCH v2 04/16] regmap-irq: make it possible to add irq_chip do a specific device node Mark Brown
2020-04-14 17:12 ` Mark Brown
2020-04-14 17:12 ` Mark Brown
2020-04-02 20:36 ` [PATCH v2 05/16] dt-bindings: mfd: Add bindings for sl28cpld Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 06/16] mfd: Add support for Kontron sl28cpld management controller Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 07/16] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 08/16] watchdog: add support for sl28cpld watchdog Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-03 6:25 ` Guenter Roeck
2020-04-03 6:25 ` Guenter Roeck
2020-04-03 6:25 ` Guenter Roeck
2020-04-02 20:36 ` [PATCH v2 09/16] pwm: add support for sl28cpld PWM controller Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 10/16] gpio: add a reusable generic gpio_chip using regmap Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-06 7:47 ` Bartosz Golaszewski
2020-04-06 7:47 ` Bartosz Golaszewski
2020-04-06 7:47 ` Bartosz Golaszewski
2020-04-06 10:10 ` Michael Walle
2020-04-06 10:10 ` Michael Walle
2020-04-06 10:10 ` Michael Walle
2020-04-14 9:50 ` Bartosz Golaszewski
2020-04-14 9:50 ` Bartosz Golaszewski
2020-04-14 9:50 ` Bartosz Golaszewski
2020-04-14 10:07 ` Michael Walle
2020-04-14 10:07 ` Michael Walle
2020-04-14 10:07 ` Michael Walle
2020-04-14 17:00 ` Bartosz Golaszewski
2020-04-14 17:00 ` Bartosz Golaszewski
2020-04-14 17:00 ` Bartosz Golaszewski
2020-04-14 18:41 ` Michael Walle
2020-04-14 18:41 ` Michael Walle
2020-04-14 18:41 ` Michael Walle
2020-04-14 19:57 ` Michael Walle
2020-04-14 19:57 ` Michael Walle
2020-04-16 9:20 ` Linus Walleij
2020-04-16 9:20 ` Linus Walleij
2020-04-16 9:20 ` Linus Walleij
2020-04-16 9:34 ` Michael Walle
2020-04-16 9:34 ` Michael Walle
2020-04-16 9:34 ` Michael Walle
2020-04-14 17:21 ` Mark Brown
2020-04-14 17:21 ` Mark Brown
2020-04-14 17:21 ` Mark Brown
2020-04-14 18:36 ` Michael Walle
2020-04-14 18:36 ` Michael Walle
2020-04-14 18:36 ` Michael Walle
2020-04-14 18:39 ` Mark Brown
2020-04-14 18:39 ` Mark Brown
2020-04-14 18:39 ` Mark Brown
2020-04-16 9:27 ` Linus Walleij
2020-04-16 9:27 ` Linus Walleij
2020-04-16 9:27 ` Linus Walleij
2020-04-17 6:34 ` Michael Walle
2020-04-17 6:34 ` Michael Walle
2020-04-17 6:34 ` Michael Walle
2020-04-21 10:50 ` Michael Walle
2020-04-21 10:50 ` Michael Walle
2020-04-21 10:50 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 11/16] gpio: add support for the sl28cpld GPIO controller Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-16 8:34 ` Linus Walleij
2020-04-16 8:34 ` Linus Walleij
2020-04-16 8:34 ` Linus Walleij
2020-04-16 8:55 ` Michael Walle
2020-04-16 8:55 ` Michael Walle
2020-04-16 8:55 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 12/16] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 21:30 ` Guenter Roeck
2020-04-02 21:30 ` Guenter Roeck
2020-04-02 21:30 ` Guenter Roeck
2020-04-02 20:36 ` [PATCH v2 13/16] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 14/16] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` [PATCH v2 15/16] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-04-02 20:36 ` Michael Walle
2020-04-02 20:36 ` Michael Walle [this message]
2020-04-02 20:36 ` [PATCH v2 16/16] arm64: dts: freescale: sl28: enable fan support Michael Walle
2020-04-02 20:36 ` Michael Walle
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200402203656.27047-17-michael@walle.cc \
--to=michael@walle.cc \
--cc=bgolaszewski@baylibre.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jason@lakedaemon.net \
--cc=jdelvare@suse.com \
--cc=lee.jones@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pwm@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=maz@kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tglx@linutronix.de \
--cc=thierry.reding@gmail.com \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.