From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org, Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Frank Wang <frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org, chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>, u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, Belisko Marek <marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org Subject: [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Date: Wed, 6 May 2020 13:20:20 +0530 [thread overview] Message-ID: <20200506075025.1677-3-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have SCLK_UPHY0_TCPDCORE, SCLK_UPHY1_TCPDCORE assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; So, mark them as empty in clock otherwise device probe on those typec phy driver would fail. Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- Changes for v2: - new patch drivers/clk/rockchip/clk_rk3399.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index b1c89ea127..4d48f70685 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -997,6 +997,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case ACLK_VOP1: case HCLK_VOP1: case HCLK_SD: + case SCLK_UPHY0_TCPDCORE: + case SCLK_UPHY1_TCPDCORE: /** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe. -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Date: Wed, 6 May 2020 13:20:20 +0530 [thread overview] Message-ID: <20200506075025.1677-3-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan@amarulasolutions.com> Due to v5.7-rc1 sync the SD controller nodes in rk3399.dtsi have SCLK_UPHY0_TCPDCORE, SCLK_UPHY1_TCPDCORE assigned-clocks which are usually required for Linux and don't require to handle them in U-Boot. assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; So, mark them as empty in clock otherwise device probe on those typec phy driver would fail. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - new patch drivers/clk/rockchip/clk_rk3399.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/clk/rockchip/clk_rk3399.c b/drivers/clk/rockchip/clk_rk3399.c index b1c89ea127..4d48f70685 100644 --- a/drivers/clk/rockchip/clk_rk3399.c +++ b/drivers/clk/rockchip/clk_rk3399.c @@ -997,6 +997,8 @@ static ulong rk3399_clk_set_rate(struct clk *clk, ulong rate) case ACLK_VOP1: case HCLK_VOP1: case HCLK_SD: + case SCLK_UPHY0_TCPDCORE: + case SCLK_UPHY1_TCPDCORE: /** * assigned-clocks handling won't require for vopl, so * return 0 to satisfy clk_set_defaults during device probe. -- 2.17.1
next prev parent reply other threads:[~2020-05-06 7:50 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-06 7:50 [PATCH v2 0/7] rockchip: PHY drivers (USB) Jagan Teki 2020-05-06 7:50 ` Jagan Teki [not found] ` <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 7:50 ` [PATCH v2 1/7] clk: rk3399: Enable/Disable the USB2PHY clk Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` Jagan Teki [this message] 2020-05-06 7:50 ` [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Jagan Teki 2020-05-06 7:50 ` [PATCH v2 3/7] clk: rk3399: Enable/Disable TCPHY clocks Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 5/7] arm64: dts: rk3399: Move u2phy into root port Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 6/7] phy: rockchip: Add Rockchip USB TypeC PHY driver Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Jagan Teki 2020-05-06 7:50 ` Jagan Teki [not found] ` <20200506075025.1677-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 11:44 ` Marek Vasut 2020-05-06 11:44 ` Marek Vasut
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200506075025.1677-3-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ --cc=wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.