From: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> To: kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org, philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org, Simon Glass <sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org>, Frank Wang <frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org>, wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org, chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org, heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>, linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Belisko Marek <marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>, u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org, Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org>, linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org Subject: [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Date: Wed, 6 May 2020 13:20:25 +0530 [thread overview] Message-ID: <20200506075025.1677-8-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, which specifies whether disable delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 respectively. Reference from below Linux commit, commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk") Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org> Signed-off-by: Jagan Teki <jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> --- Changes for v2: - new patch drivers/usb/dwc3/core.c | 6 ++++++ drivers/usb/dwc3/core.h | 1 + include/dwc3-uboot.h | 1 + 3 files changed, 8 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4ec3f6df6a..6e438e5604 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -377,6 +377,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u3_susphy_quirk) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->dis_del_phy_power_chg_quirk) + reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); mdelay(100); @@ -715,6 +718,7 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) dwc->rx_detect_poll_quirk = dwc3_dev->rx_detect_poll_quirk; dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk; dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk; + dwc->dis_del_phy_power_chg_quirk = dwc3_dev->dis_del_phy_power_chg_quirk; dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk; if (dwc3_dev->tx_de_emphasis) @@ -975,6 +979,8 @@ void dwc3_of_parse(struct dwc3 *dwc) "snps,dis_u3_susphy_quirk"); dwc->dis_u2_susphy_quirk = dev_read_bool(dev, "snps,dis_u2_susphy_quirk"); + dwc->dis_del_phy_power_chg_quirk = dev_read_bool(dev, + "snps,dis-del-phy-power-chg-quirk"); dwc->tx_de_emphasis_quirk = dev_read_bool(dev, "snps,tx_de_emphasis_quirk"); tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1c08a2c5b6..7f45a9c459 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -821,6 +821,7 @@ struct dwc3 { unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned dis_u2_susphy_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h index 3c9e204cf0..f5086fb946 100644 --- a/include/dwc3-uboot.h +++ b/include/dwc3-uboot.h @@ -32,6 +32,7 @@ struct dwc3_device { unsigned rx_detect_poll_quirk; unsigned dis_u3_susphy_quirk; unsigned dis_u2_susphy_quirk; + unsigned dis_del_phy_power_chg_quirk; unsigned tx_de_emphasis_quirk; unsigned tx_de_emphasis; int index; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Jagan Teki <jagan@amarulasolutions.com> To: u-boot@lists.denx.de Subject: [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Date: Wed, 6 May 2020 13:20:25 +0530 [thread overview] Message-ID: <20200506075025.1677-8-jagan@amarulasolutions.com> (raw) In-Reply-To: <20200506075025.1677-1-jagan@amarulasolutions.com> Add a quirk to clear the GUSB3PIPECTL.DELAYP1TRANS bit, which specifies whether disable delay PHY power change from P0 to P1/P2/P3 when link state changing from U0 to U1/U2/U3 respectively. Reference from below Linux commit, commit <00fe081dc3a3> ("usb: dwc3: add dis_del_phy_power_chg_quirk") Cc: Marek Vasut <marex@denx.de> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - new patch drivers/usb/dwc3/core.c | 6 ++++++ drivers/usb/dwc3/core.h | 1 + include/dwc3-uboot.h | 1 + 3 files changed, 8 insertions(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 4ec3f6df6a..6e438e5604 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -377,6 +377,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc) if (dwc->dis_u3_susphy_quirk) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; + if (dwc->dis_del_phy_power_chg_quirk) + reg &= ~DWC3_GUSB3PIPECTL_DEPOCHANGE; + dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); mdelay(100); @@ -715,6 +718,7 @@ int dwc3_uboot_init(struct dwc3_device *dwc3_dev) dwc->rx_detect_poll_quirk = dwc3_dev->rx_detect_poll_quirk; dwc->dis_u3_susphy_quirk = dwc3_dev->dis_u3_susphy_quirk; dwc->dis_u2_susphy_quirk = dwc3_dev->dis_u2_susphy_quirk; + dwc->dis_del_phy_power_chg_quirk = dwc3_dev->dis_del_phy_power_chg_quirk; dwc->tx_de_emphasis_quirk = dwc3_dev->tx_de_emphasis_quirk; if (dwc3_dev->tx_de_emphasis) @@ -975,6 +979,8 @@ void dwc3_of_parse(struct dwc3 *dwc) "snps,dis_u3_susphy_quirk"); dwc->dis_u2_susphy_quirk = dev_read_bool(dev, "snps,dis_u2_susphy_quirk"); + dwc->dis_del_phy_power_chg_quirk = dev_read_bool(dev, + "snps,dis-del-phy-power-chg-quirk"); dwc->tx_de_emphasis_quirk = dev_read_bool(dev, "snps,tx_de_emphasis_quirk"); tmp = dev_read_u8_array_ptr(dev, "snps,tx_de_emphasis", 1); diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 1c08a2c5b6..7f45a9c459 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -821,6 +821,7 @@ struct dwc3 { unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned dis_u2_susphy_quirk:1; + unsigned dis_del_phy_power_chg_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; diff --git a/include/dwc3-uboot.h b/include/dwc3-uboot.h index 3c9e204cf0..f5086fb946 100644 --- a/include/dwc3-uboot.h +++ b/include/dwc3-uboot.h @@ -32,6 +32,7 @@ struct dwc3_device { unsigned rx_detect_poll_quirk; unsigned dis_u3_susphy_quirk; unsigned dis_u2_susphy_quirk; + unsigned dis_del_phy_power_chg_quirk; unsigned tx_de_emphasis_quirk; unsigned tx_de_emphasis; int index; -- 2.17.1
next prev parent reply other threads:[~2020-05-06 7:50 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-06 7:50 [PATCH v2 0/7] rockchip: PHY drivers (USB) Jagan Teki 2020-05-06 7:50 ` Jagan Teki [not found] ` <20200506075025.1677-1-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 7:50 ` [PATCH v2 1/7] clk: rk3399: Enable/Disable the USB2PHY clk Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 2/7] clk: rk3399: Set empty for TCPHY assigned-clocks Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 3/7] clk: rk3399: Enable/Disable TCPHY clocks Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 4/7] phy: rockchip: Add Rockchip USB2PHY driver Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 5/7] arm64: dts: rk3399: Move u2phy into root port Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` [PATCH v2 6/7] phy: rockchip: Add Rockchip USB TypeC PHY driver Jagan Teki 2020-05-06 7:50 ` Jagan Teki 2020-05-06 7:50 ` Jagan Teki [this message] 2020-05-06 7:50 ` [PATCH v2 7/7] usb: dwc3: add dis_del_phy_power_chg_quirk Jagan Teki [not found] ` <20200506075025.1677-8-jagan-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org> 2020-05-06 11:44 ` Marek Vasut 2020-05-06 11:44 ` Marek Vasut
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200506075025.1677-8-jagan@amarulasolutions.com \ --to=jagan-dyjbcgdgk7pe9whmmfpqlfatqe2ktcn/@public.gmane.org \ --cc=chenjh-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=frank.wang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \ --cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ --cc=linux-amarula-dyjBcgdgk7Pe9wHmmfpqLFaTQe2KTcn/@public.gmane.org \ --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \ --cc=marek.belisko-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \ --cc=marex-ynQEQJNshbs@public.gmane.org \ --cc=philipp.tomsich-SN7IsUiht6C/RdPyistoZJqQE7yCjDx5@public.gmane.org \ --cc=sjg-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \ --cc=u-boot-0aAXYlwwYIKGBzrmiIFOJg@public.gmane.org \ --cc=wmc-TNX95d0MmH7DzftRWevZcw@public.gmane.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.