All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Mark Brown <broonie@kernel.org>
Cc: Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	Ramuthevar Vadivel Murugan 
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	<linux-spi@vger.kernel.org>, <simon.k.r.goldschmidt@gmail.com>,
	<dinguyen@kernel.org>, <marex@denx.de>
Subject: [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
Date: Sat, 9 May 2020 00:24:05 +0530	[thread overview]
Message-ID: <20200508185411.487-1-vigneshr@ti.com> (raw)

This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add
support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@linux.intel.com> that intended to move
cadence-quadspi driver to spi-mem framework

Those patches were trying to accomplish too many things in a single set
of patches and need to split into smaller patches. This is reduced
version of above series.

Changes that are intended to make migration easy are split into separate
patches. Patches 1 to 3 drop features that cannot be supported under
spi-mem at the moment (backward compatibility is maintained).
Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to
spi-mem and patch 7 moves the driver to drivers/spi folder.

I have tested both INDAC mode (used by non TI platforms like Altera
SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs.

Patches to move move bindings over to
"Documentation/devicetree/bindings/spi/" directory and also conversion
of bindig doc to YAML will be posted separately.  Support for Intel
platform would follow that.

Changes since v12

- Drop intel platform related changes
- Drop DT bindings movement to YAML
- Split patch moving driver to spi-mem framework framework into
  multiple patches as suggested by Tudor.

v12: https://patchwork.ozlabs.org/project/linux-mtd/list/?series=163343&state=%2A&archive=both

Vadivel,

I have maintained the additional changes needed on top of this series
for Intel platform that were part of your v12 series here (needs cleanup):

https://github.com/r-vignesh/linux.git branch: cqspi-mig

Please use above branch to test the same.

Ramuthevar Vadivel Murugan (2):
  mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  spi: Move cadence-quadspi driver to drivers/spi/

Vignesh Raghavendra (4):
  mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property
  mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on
    failure
  mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire
    reset lines

 drivers/mtd/spi-nor/controllers/Kconfig       |  11 -
 drivers/mtd/spi-nor/controllers/Makefile      |   1 -
 drivers/spi/Kconfig                           |  11 +
 drivers/spi/Makefile                          |   1 +
 .../spi-cadence-quadspi.c}                    | 546 +++++++-----------
 5 files changed, 215 insertions(+), 355 deletions(-)
 rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (73%)

-- 
2.26.2


WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Mark Brown <broonie@kernel.org>
Cc: marex@denx.de, Vignesh Raghavendra <vigneshr@ti.com>,
	Boris Brezillon <bbrezillon@kernel.org>,
	dinguyen@kernel.org, simon.k.r.goldschmidt@gmail.com,
	linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org,
	Ramuthevar Vadivel Murugan
	<vadivel.muruganx.ramuthevar@linux.intel.com>,
	linux-mtd@lists.infradead.org
Subject: [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework
Date: Sat, 9 May 2020 00:24:05 +0530	[thread overview]
Message-ID: <20200508185411.487-1-vigneshr@ti.com> (raw)

This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add
support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX
<vadivel.muruganx.ramuthevar@linux.intel.com> that intended to move
cadence-quadspi driver to spi-mem framework

Those patches were trying to accomplish too many things in a single set
of patches and need to split into smaller patches. This is reduced
version of above series.

Changes that are intended to make migration easy are split into separate
patches. Patches 1 to 3 drop features that cannot be supported under
spi-mem at the moment (backward compatibility is maintained).
Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to
spi-mem and patch 7 moves the driver to drivers/spi folder.

I have tested both INDAC mode (used by non TI platforms like Altera
SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs.

Patches to move move bindings over to
"Documentation/devicetree/bindings/spi/" directory and also conversion
of bindig doc to YAML will be posted separately.  Support for Intel
platform would follow that.

Changes since v12

- Drop intel platform related changes
- Drop DT bindings movement to YAML
- Split patch moving driver to spi-mem framework framework into
  multiple patches as suggested by Tudor.

v12: https://patchwork.ozlabs.org/project/linux-mtd/list/?series=163343&state=%2A&archive=both

Vadivel,

I have maintained the additional changes needed on top of this series
for Intel platform that were part of your v12 series here (needs cleanup):

https://github.com/r-vignesh/linux.git branch: cqspi-mig

Please use above branch to test the same.

Ramuthevar Vadivel Murugan (2):
  mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework
  spi: Move cadence-quadspi driver to drivers/spi/

Vignesh Raghavendra (4):
  mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property
  mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode
  mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on
    failure
  mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire
    reset lines

 drivers/mtd/spi-nor/controllers/Kconfig       |  11 -
 drivers/mtd/spi-nor/controllers/Makefile      |   1 -
 drivers/spi/Kconfig                           |  11 +
 drivers/spi/Makefile                          |   1 +
 .../spi-cadence-quadspi.c}                    | 546 +++++++-----------
 5 files changed, 215 insertions(+), 355 deletions(-)
 rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (73%)

-- 
2.26.2


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

             reply	other threads:[~2020-05-08 18:54 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-05-08 18:54 Vignesh Raghavendra [this message]
2020-05-08 18:54 ` [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework Vignesh Raghavendra
2020-05-08 18:54 ` [PATCH 1/6] mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property Vignesh Raghavendra
2020-05-08 18:54   ` [PATCH 1/6] mtd: spi-nor: cadence-quadspi: Drop cdns, is-decoded-cs property Vignesh Raghavendra
2020-05-26  9:31   ` [PATCH 1/6] mtd: spi-nor: cadence-quadspi: Drop cdns,is-decoded-cs property Vignesh Raghavendra
2020-05-26  9:31     ` Vignesh Raghavendra
2020-05-08 18:54 ` [PATCH 2/6] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode Vignesh Raghavendra
2020-05-08 18:54   ` Vignesh Raghavendra
2020-05-28 18:37   ` Tudor.Ambarus
2020-05-28 18:37     ` Tudor.Ambarus
2020-05-08 18:54 ` [PATCH 3/6] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure Vignesh Raghavendra
2020-05-08 18:54   ` Vignesh Raghavendra
2020-05-08 18:54 ` [PATCH 4/6] mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines Vignesh Raghavendra
2020-05-08 18:54   ` Vignesh Raghavendra
2020-05-08 18:54 ` [PATCH 5/6] mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework Vignesh Raghavendra
2020-05-08 18:54   ` Vignesh Raghavendra
2020-05-08 18:54 ` [PATCH 6/6] spi: Move cadence-quadspi driver to drivers/spi/ Vignesh Raghavendra
2020-05-08 18:54   ` Vignesh Raghavendra
2020-05-11 10:20 ` [PATCH 0/6] mtd: spi-nor: Move cadence-qaudspi to spi-mem framework Ramuthevar, Vadivel MuruganX
2020-05-11 10:20   ` Ramuthevar, Vadivel MuruganX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200508185411.487-1-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=bbrezillon@kernel.org \
    --cc=broonie@kernel.org \
    --cc=dinguyen@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=marex@denx.de \
    --cc=simon.k.r.goldschmidt@gmail.com \
    --cc=tudor.ambarus@microchip.com \
    --cc=vadivel.muruganx.ramuthevar@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.