From: Frank Lee <frank@allwinnertech.com> To: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org, linus.walleij@linaro.org, p.zabel@pengutronix.de, frank@allwinnertech.com, huangshuosheng@allwinnertech.com, tiny.windzz@gmail.com Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org, linux-gpio@vger.kernel.org Subject: [PATCH 4/4] arm64: allwinner: A100: add support for Allwinner Perf1 board Date: Fri, 22 May 2020 11:07:43 +0800 [thread overview] Message-ID: <20200522030743.10204-5-frank@allwinnertech.com> (raw) In-Reply-To: <20200522030743.10204-1-frank@allwinnertech.com> A100 perf1 is an Allwinner A100-based SBC, with the following features: - 1GiB DDR3 DRAM - AXP803 PMIC - 2 USB 2.0 ports - MicroSD slot and on-board eMMC module - on-board Nand flash - ··· Adds initial support for it, including the UART. Signed-off-by: Frank Lee <frank@allwinnertech.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun50i-a100-allwinner-perf1.dts | 27 +++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index e4d3cd0ac5bb..ab780dbdd17b 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts new file mode 100644 index 000000000000..32c9986920ed --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Frank Lee <frank@allwinner.com> + */ + +/dts-v1/; + +#include "sun50i-a100.dtsi" + +/{ + model = "A100 perf1"; + compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; -- 2.24.0
WARNING: multiple messages have this Message-ID (diff)
From: Frank Lee <frank@allwinnertech.com> To: mripard@kernel.org, wens@csie.org, robh+dt@kernel.org, mturquette@baylibre.com, sboyd@kernel.org, linus.walleij@linaro.org, p.zabel@pengutronix.de, frank@allwinnertech.com, huangshuosheng@allwinnertech.com, tiny.windzz@gmail.com Cc: devicetree@vger.kernel.org, linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org Subject: [PATCH 4/4] arm64: allwinner: A100: add support for Allwinner Perf1 board Date: Fri, 22 May 2020 11:07:43 +0800 [thread overview] Message-ID: <20200522030743.10204-5-frank@allwinnertech.com> (raw) In-Reply-To: <20200522030743.10204-1-frank@allwinnertech.com> A100 perf1 is an Allwinner A100-based SBC, with the following features: - 1GiB DDR3 DRAM - AXP803 PMIC - 2 USB 2.0 ports - MicroSD slot and on-board eMMC module - on-board Nand flash - ··· Adds initial support for it, including the UART. Signed-off-by: Frank Lee <frank@allwinnertech.com> --- arch/arm64/boot/dts/allwinner/Makefile | 1 + .../allwinner/sun50i-a100-allwinner-perf1.dts | 27 +++++++++++++++++++ 2 files changed, 28 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index e4d3cd0ac5bb..ab780dbdd17b 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus-v1.2.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-emlid-neutis-n5-devboard.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts new file mode 100644 index 000000000000..32c9986920ed --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a100-allwinner-perf1.dts @@ -0,0 +1,27 @@ +// SPDX-License-Identifier: (GPL-2.0+ or MIT) +/* + * Copyright (c) 2020 Frank Lee <frank@allwinner.com> + */ + +/dts-v1/; + +#include "sun50i-a100.dtsi" + +/{ + model = "A100 perf1"; + compatible = "allwinner,a100-perf1", "allwinner,sun50i-a100"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; -- 2.24.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-05-22 3:08 UTC|newest] Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-05-22 3:07 [PATCH 0/4] Allwinner A100 Initial support Frank Lee 2020-05-22 3:07 ` Frank Lee 2020-05-22 3:07 ` [PATCH 1/4] clk: sunxi-ng: add support for the Allwinner A100 CCU Frank Lee 2020-05-22 3:07 ` Frank Lee 2020-05-22 15:14 ` Maxime Ripard 2020-05-22 15:14 ` Maxime Ripard 2020-06-03 9:42 ` 回复:[PATCH " 李扬韬 2020-06-03 9:48 ` [PATCH " Chen-Yu Tsai 2020-06-03 9:48 ` Chen-Yu Tsai 2020-05-22 3:07 ` [PATCH 2/4] pinctrl: sunxi: add support for the Allwinner A100 pin controller Frank Lee 2020-05-22 3:07 ` Frank Lee 2020-05-22 15:28 ` Maxime Ripard 2020-05-22 15:28 ` Maxime Ripard 2020-06-03 9:44 ` 回复:[PATCH " 李扬韬 2020-06-05 15:13 ` Maxime Ripard 2020-06-05 15:13 ` Maxime Ripard 2020-06-16 9:26 ` Frank Lee 2020-06-20 21:27 ` Linus Walleij 2020-05-22 3:07 ` [PATCH 3/4] arm64: allwinner: A100: add the basical Allwinner A100 DTSI file Frank Lee 2020-05-22 3:07 ` Frank Lee 2020-05-22 3:07 ` Frank Lee [this message] 2020-05-22 3:07 ` [PATCH 4/4] arm64: allwinner: A100: add support for Allwinner Perf1 board Frank Lee 2020-05-22 15:31 ` Maxime Ripard 2020-05-22 15:31 ` Maxime Ripard 2020-05-22 15:02 ` [PATCH 0/4] Allwinner A100 Initial support Maxime Ripard 2020-05-22 15:02 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200522030743.10204-5-frank@allwinnertech.com \ --to=frank@allwinnertech.com \ --cc=devicetree@vger.kernel.org \ --cc=huangshuosheng@allwinnertech.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mripard@kernel.org \ --cc=mturquette@baylibre.com \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=tiny.windzz@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.