From: Mathieu Poirier <mathieu.poirier@linaro.org> To: bjorn.andersson@linaro.org, ohad@wizery.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com Cc: loic.pallardy@st.com, arnaud.pouliquen@st.com, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 03/11] remoteproc: stm32: Decouple rproc from DT parsing Date: Mon, 1 Jun 2020 11:55:44 -0600 [thread overview] Message-ID: <20200601175552.22286-4-mathieu.poirier@linaro.org> (raw) In-Reply-To: <20200601175552.22286-1-mathieu.poirier@linaro.org> Remove the remote processor from the process of parsing the device tree since (1) there is no correlation between them and (2) to use the information that was gathered to make a decision on whether to synchronise with the M4 or not. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/remoteproc/stm32_rproc.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index 94fd687fb5b2..1e512ddf2591 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -538,12 +538,11 @@ static int stm32_rproc_get_syscon(struct device_node *np, const char *prop, return err; } -static int stm32_rproc_parse_dt(struct platform_device *pdev) +static int stm32_rproc_parse_dt(struct platform_device *pdev, + struct stm32_rproc *ddata, bool *auto_boot) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - struct rproc *rproc = platform_get_drvdata(pdev); - struct stm32_rproc *ddata = rproc->priv; struct stm32_syscon tz; unsigned int tzen; int err, irq; @@ -589,7 +588,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev) err = regmap_read(tz.map, tz.reg, &tzen); if (err) { - dev_err(&rproc->dev, "failed to read tzen\n"); + dev_err(dev, "failed to read tzen\n"); return err; } ddata->secured_soc = tzen & tz.mask; @@ -605,7 +604,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev) if (err) dev_info(dev, "failed to get pdds\n"); - rproc->auto_boot = of_property_read_bool(np, "st,auto-boot"); + *auto_boot = of_property_read_bool(np, "st,auto-boot"); return stm32_rproc_of_memory_translations(pdev, ddata); } @@ -626,9 +625,15 @@ static int stm32_rproc_probe(struct platform_device *pdev) if (!rproc) return -ENOMEM; + ddata = rproc->priv; + rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); + + ret = stm32_rproc_parse_dt(pdev, ddata, &rproc->auto_boot); + if (ret) + goto free_rproc; + rproc->has_iommu = false; - ddata = rproc->priv; ddata->workqueue = create_workqueue(dev_name(dev)); if (!ddata->workqueue) { dev_err(dev, "cannot create workqueue\n"); @@ -638,13 +643,9 @@ static int stm32_rproc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rproc); - ret = stm32_rproc_parse_dt(pdev); - if (ret) - goto free_wkq; - ret = stm32_rproc_request_mbox(rproc); if (ret) - goto free_rproc; + goto free_wkq; ret = rproc_add(rproc); if (ret) -- 2.20.1
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org> To: bjorn.andersson@linaro.org, ohad@wizery.com, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com Cc: loic.pallardy@st.com, arnaud.pouliquen@st.com, linux-remoteproc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 03/11] remoteproc: stm32: Decouple rproc from DT parsing Date: Mon, 1 Jun 2020 11:55:44 -0600 [thread overview] Message-ID: <20200601175552.22286-4-mathieu.poirier@linaro.org> (raw) In-Reply-To: <20200601175552.22286-1-mathieu.poirier@linaro.org> Remove the remote processor from the process of parsing the device tree since (1) there is no correlation between them and (2) to use the information that was gathered to make a decision on whether to synchronise with the M4 or not. Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/remoteproc/stm32_rproc.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index 94fd687fb5b2..1e512ddf2591 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -538,12 +538,11 @@ static int stm32_rproc_get_syscon(struct device_node *np, const char *prop, return err; } -static int stm32_rproc_parse_dt(struct platform_device *pdev) +static int stm32_rproc_parse_dt(struct platform_device *pdev, + struct stm32_rproc *ddata, bool *auto_boot) { struct device *dev = &pdev->dev; struct device_node *np = dev->of_node; - struct rproc *rproc = platform_get_drvdata(pdev); - struct stm32_rproc *ddata = rproc->priv; struct stm32_syscon tz; unsigned int tzen; int err, irq; @@ -589,7 +588,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev) err = regmap_read(tz.map, tz.reg, &tzen); if (err) { - dev_err(&rproc->dev, "failed to read tzen\n"); + dev_err(dev, "failed to read tzen\n"); return err; } ddata->secured_soc = tzen & tz.mask; @@ -605,7 +604,7 @@ static int stm32_rproc_parse_dt(struct platform_device *pdev) if (err) dev_info(dev, "failed to get pdds\n"); - rproc->auto_boot = of_property_read_bool(np, "st,auto-boot"); + *auto_boot = of_property_read_bool(np, "st,auto-boot"); return stm32_rproc_of_memory_translations(pdev, ddata); } @@ -626,9 +625,15 @@ static int stm32_rproc_probe(struct platform_device *pdev) if (!rproc) return -ENOMEM; + ddata = rproc->priv; + rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); + + ret = stm32_rproc_parse_dt(pdev, ddata, &rproc->auto_boot); + if (ret) + goto free_rproc; + rproc->has_iommu = false; - ddata = rproc->priv; ddata->workqueue = create_workqueue(dev_name(dev)); if (!ddata->workqueue) { dev_err(dev, "cannot create workqueue\n"); @@ -638,13 +643,9 @@ static int stm32_rproc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, rproc); - ret = stm32_rproc_parse_dt(pdev); - if (ret) - goto free_wkq; - ret = stm32_rproc_request_mbox(rproc); if (ret) - goto free_rproc; + goto free_wkq; ret = rproc_add(rproc); if (ret) -- 2.20.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-06-01 19:01 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-06-01 17:55 [PATCH v4 00/11] remoteproc: stm32: Add support for attaching to M4 Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 01/11] remoteproc: stm32: Decouple rproc from memory translation Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 02/11] remoteproc: stm32: Request IRQ with platform device Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier [this message] 2020-06-01 17:55 ` [PATCH v4 03/11] remoteproc: stm32: Decouple rproc from DT parsing Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 04/11] remoteproc: stm32: Remove memory translation " Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 05/11] remoteproc: stm32: Parse syscon that will manage M4 synchronisation Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 06/11] remoteproc: stm32: Properly set co-processor state when attaching Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-22 18:05 ` Bjorn Andersson 2020-06-01 17:55 ` [PATCH v4 07/11] remoteproc: Make function rproc_resource_cleanup() public Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 08/11] remoteproc: stm32: Split function stm32_rproc_parse_fw() Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 09/11] remoteproc: stm32: Properly handle the resource table when attaching Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 10/11] remoteproc: stm32: Introduce new attach() operation Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier 2020-06-01 17:55 ` [PATCH v4 11/11] remoteproc: stm32: Update M4 state in stm32_rproc_stop() Mathieu Poirier 2020-06-01 17:55 ` Mathieu Poirier
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200601175552.22286-4-mathieu.poirier@linaro.org \ --to=mathieu.poirier@linaro.org \ --cc=alexandre.torgue@st.com \ --cc=arnaud.pouliquen@st.com \ --cc=bjorn.andersson@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-remoteproc@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=loic.pallardy@st.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=ohad@wizery.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.