From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: <linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<mchehab@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<sakari.ailus@linux.intel.com>, <drinkcat@chromium.org>,
<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
<bingbu.cao@intel.com>
Cc: <srv_heupstream@mediatek.com>,
<linux-mediatek@lists.infradead.org>,
<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>,
<dongchun.zhu@mediatek.com>
Subject: [PATCH V8 0/2] media: i2c: Add support for DW9768 VCM driver
Date: Tue, 16 Jun 2020 20:55:29 +0800 [thread overview]
Message-ID: <20200616125531.31671-1-dongchun.zhu@mediatek.com> (raw)
Hello,
This series adds DT bindings and V4L2 sub-device driver for Dongwoon's DW9768,
which is a 10-bit DAC with 100mA output current sink capability.
The driver is designed for linear control of voice coil motor(VCM),
and controlled via IIC serial interface to set the desired focus.
It controls the position with 10-bit DAC data D[9:0] and seperates
two 8-bit registers to control the VCM position as belows.
DAC_MSB: D[9:8](ADDR: 0x03):
+---+---+---+---+---+---+---+---+
|---|---|---|---|---|---|D09|D08|
+---+---+---+---+---+---+---+---+
DAC_LSB: D[7:0](ADDR: 0x04):
+---+---+---+---+---+---+---+---+
|D07|D06|D05|D04|D03|D02|D01|D00|
+---+---+---+---+---+---+---+---+
This driver supports:
- set DW9768 to standby mode once suspend and turn it back to active if resume
- set the desired focus via V4L2_CID_FOCUS_ABSOLUTE ctrl
Previous versions of this patch-set can be found here:
v7: https://lore.kernel.org/linux-media/20200605105412.18813-1-dongchun.zhu@mediatek.com/
v6: https://lore.kernel.org/linux-media/20200518132731.20855-1-dongchun.zhu@mediatek.com/
v5: https://lore.kernel.org/linux-media/20200502161727.30463-1-dongchun.zhu@mediatek.com/
v4: https://lore.kernel.org/linux-media/20200330123634.363-1-dongchun.zhu@mediatek.com/
v3: https://lore.kernel.org/linux-media/20200228155958.20657-1-dongchun.zhu@mediatek.com/
v2: https://lore.kernel.org/linux-media/20190905072142.14606-1-dongchun.zhu@mediatek.com/
v1: https://lore.kernel.org/linux-media/20190708100641.2702-1-dongchun.zhu@mediatek.com/
Mainly changes of v8 are addressing comments from Rob, Sakari, Andy, Tomasz.
Compared to v7:
- Rebase onto 5.8-rc1
- Calculate move delay time once in probe() and restore it in private struct
- Use the fwnode property API to read the properties into the filed directly
- Rename error_async_register to err_power_off and refine it
- Fix other review comments in v7
Please review.
Thanks.
Dongchun Zhu (2):
media: dt-bindings: media: i2c: Document DW9768 bindings
media: i2c: dw9768: Add DW9768 VCM driver
.../bindings/media/i2c/dongwoon,dw9768.yaml | 100 ++++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/dw9768.c | 553 +++++++++++++++++++++
5 files changed, 674 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
create mode 100644 drivers/media/i2c/dw9768.c
--
2.9.2
WARNING: multiple messages have this Message-ID (diff)
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: <linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<mchehab@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<sakari.ailus@linux.intel.com>, <drinkcat@chromium.org>,
<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
<bingbu.cao@intel.com>
Cc: devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
shengnan.wang@mediatek.com, sj.huang@mediatek.com,
linux-mediatek@lists.infradead.org, dongchun.zhu@mediatek.com,
louis.kuo@mediatek.com, linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: [PATCH V8 0/2] media: i2c: Add support for DW9768 VCM driver
Date: Tue, 16 Jun 2020 20:55:29 +0800 [thread overview]
Message-ID: <20200616125531.31671-1-dongchun.zhu@mediatek.com> (raw)
Hello,
This series adds DT bindings and V4L2 sub-device driver for Dongwoon's DW9768,
which is a 10-bit DAC with 100mA output current sink capability.
The driver is designed for linear control of voice coil motor(VCM),
and controlled via IIC serial interface to set the desired focus.
It controls the position with 10-bit DAC data D[9:0] and seperates
two 8-bit registers to control the VCM position as belows.
DAC_MSB: D[9:8](ADDR: 0x03):
+---+---+---+---+---+---+---+---+
|---|---|---|---|---|---|D09|D08|
+---+---+---+---+---+---+---+---+
DAC_LSB: D[7:0](ADDR: 0x04):
+---+---+---+---+---+---+---+---+
|D07|D06|D05|D04|D03|D02|D01|D00|
+---+---+---+---+---+---+---+---+
This driver supports:
- set DW9768 to standby mode once suspend and turn it back to active if resume
- set the desired focus via V4L2_CID_FOCUS_ABSOLUTE ctrl
Previous versions of this patch-set can be found here:
v7: https://lore.kernel.org/linux-media/20200605105412.18813-1-dongchun.zhu@mediatek.com/
v6: https://lore.kernel.org/linux-media/20200518132731.20855-1-dongchun.zhu@mediatek.com/
v5: https://lore.kernel.org/linux-media/20200502161727.30463-1-dongchun.zhu@mediatek.com/
v4: https://lore.kernel.org/linux-media/20200330123634.363-1-dongchun.zhu@mediatek.com/
v3: https://lore.kernel.org/linux-media/20200228155958.20657-1-dongchun.zhu@mediatek.com/
v2: https://lore.kernel.org/linux-media/20190905072142.14606-1-dongchun.zhu@mediatek.com/
v1: https://lore.kernel.org/linux-media/20190708100641.2702-1-dongchun.zhu@mediatek.com/
Mainly changes of v8 are addressing comments from Rob, Sakari, Andy, Tomasz.
Compared to v7:
- Rebase onto 5.8-rc1
- Calculate move delay time once in probe() and restore it in private struct
- Use the fwnode property API to read the properties into the filed directly
- Rename error_async_register to err_power_off and refine it
- Fix other review comments in v7
Please review.
Thanks.
Dongchun Zhu (2):
media: dt-bindings: media: i2c: Document DW9768 bindings
media: i2c: dw9768: Add DW9768 VCM driver
.../bindings/media/i2c/dongwoon,dw9768.yaml | 100 ++++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/dw9768.c | 553 +++++++++++++++++++++
5 files changed, 674 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
create mode 100644 drivers/media/i2c/dw9768.c
--
2.9.2
_______________________________________________
Linux-mediatek mailing list
Linux-mediatek@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-mediatek
WARNING: multiple messages have this Message-ID (diff)
From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: <linus.walleij@linaro.org>, <bgolaszewski@baylibre.com>,
<mchehab@kernel.org>, <andriy.shevchenko@linux.intel.com>,
<robh+dt@kernel.org>, <mark.rutland@arm.com>,
<sakari.ailus@linux.intel.com>, <drinkcat@chromium.org>,
<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
<bingbu.cao@intel.com>
Cc: devicetree@vger.kernel.org, srv_heupstream@mediatek.com,
shengnan.wang@mediatek.com, sj.huang@mediatek.com,
linux-mediatek@lists.infradead.org, dongchun.zhu@mediatek.com,
louis.kuo@mediatek.com, linux-arm-kernel@lists.infradead.org,
linux-media@vger.kernel.org
Subject: [PATCH V8 0/2] media: i2c: Add support for DW9768 VCM driver
Date: Tue, 16 Jun 2020 20:55:29 +0800 [thread overview]
Message-ID: <20200616125531.31671-1-dongchun.zhu@mediatek.com> (raw)
Hello,
This series adds DT bindings and V4L2 sub-device driver for Dongwoon's DW9768,
which is a 10-bit DAC with 100mA output current sink capability.
The driver is designed for linear control of voice coil motor(VCM),
and controlled via IIC serial interface to set the desired focus.
It controls the position with 10-bit DAC data D[9:0] and seperates
two 8-bit registers to control the VCM position as belows.
DAC_MSB: D[9:8](ADDR: 0x03):
+---+---+---+---+---+---+---+---+
|---|---|---|---|---|---|D09|D08|
+---+---+---+---+---+---+---+---+
DAC_LSB: D[7:0](ADDR: 0x04):
+---+---+---+---+---+---+---+---+
|D07|D06|D05|D04|D03|D02|D01|D00|
+---+---+---+---+---+---+---+---+
This driver supports:
- set DW9768 to standby mode once suspend and turn it back to active if resume
- set the desired focus via V4L2_CID_FOCUS_ABSOLUTE ctrl
Previous versions of this patch-set can be found here:
v7: https://lore.kernel.org/linux-media/20200605105412.18813-1-dongchun.zhu@mediatek.com/
v6: https://lore.kernel.org/linux-media/20200518132731.20855-1-dongchun.zhu@mediatek.com/
v5: https://lore.kernel.org/linux-media/20200502161727.30463-1-dongchun.zhu@mediatek.com/
v4: https://lore.kernel.org/linux-media/20200330123634.363-1-dongchun.zhu@mediatek.com/
v3: https://lore.kernel.org/linux-media/20200228155958.20657-1-dongchun.zhu@mediatek.com/
v2: https://lore.kernel.org/linux-media/20190905072142.14606-1-dongchun.zhu@mediatek.com/
v1: https://lore.kernel.org/linux-media/20190708100641.2702-1-dongchun.zhu@mediatek.com/
Mainly changes of v8 are addressing comments from Rob, Sakari, Andy, Tomasz.
Compared to v7:
- Rebase onto 5.8-rc1
- Calculate move delay time once in probe() and restore it in private struct
- Use the fwnode property API to read the properties into the filed directly
- Rename error_async_register to err_power_off and refine it
- Fix other review comments in v7
Please review.
Thanks.
Dongchun Zhu (2):
media: dt-bindings: media: i2c: Document DW9768 bindings
media: i2c: dw9768: Add DW9768 VCM driver
.../bindings/media/i2c/dongwoon,dw9768.yaml | 100 ++++
MAINTAINERS | 8 +
drivers/media/i2c/Kconfig | 12 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/dw9768.c | 553 +++++++++++++++++++++
5 files changed, 674 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/dongwoon,dw9768.yaml
create mode 100644 drivers/media/i2c/dw9768.c
--
2.9.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-06-16 12:58 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-16 12:55 Dongchun Zhu [this message]
2020-06-16 12:55 ` [PATCH V8 0/2] media: i2c: Add support for DW9768 VCM driver Dongchun Zhu
2020-06-16 12:55 ` Dongchun Zhu
2020-06-16 12:55 ` [PATCH V8 1/2] media: dt-bindings: media: i2c: Document DW9768 bindings Dongchun Zhu
2020-06-16 12:55 ` Dongchun Zhu
2020-06-16 12:55 ` Dongchun Zhu
2020-06-16 12:55 ` [PATCH V8 2/2] media: i2c: dw9768: Add DW9768 VCM driver Dongchun Zhu
2020-06-16 12:55 ` Dongchun Zhu
2020-06-16 12:55 ` Dongchun Zhu
2020-06-18 18:45 ` Tomasz Figa
2020-06-18 18:45 ` Tomasz Figa
2020-06-18 18:45 ` Tomasz Figa
2020-06-20 6:58 ` Dongchun Zhu
2020-06-20 6:58 ` Dongchun Zhu
2020-06-20 6:58 ` Dongchun Zhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200616125531.31671-1-dongchun.zhu@mediatek.com \
--to=dongchun.zhu@mediatek.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=bgolaszewski@baylibre.com \
--cc=bingbu.cao@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=drinkcat@chromium.org \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=louis.kuo@mediatek.com \
--cc=mark.rutland@arm.com \
--cc=matthias.bgg@gmail.com \
--cc=mchehab@kernel.org \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
--cc=shengnan.wang@mediatek.com \
--cc=sj.huang@mediatek.com \
--cc=srv_heupstream@mediatek.com \
--cc=tfiga@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.