From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>,
Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>,
Nishanth Menon <nm@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>, <linux-kernel@vger.kernel.org>,
<devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Vignesh Raghavendra <vigneshr@ti.com>, Suman Anna <s-anna@ti.com>,
Grygorii Strashko <grygorii.strashko@ti.com>
Subject: [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw
Date: Tue, 8 Sep 2020 19:59:38 +0300 [thread overview]
Message-ID: <20200908165942.32368-1-grygorii.strashko@ti.com> (raw)
Hi All,
arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes
This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking
This series depends on:
- [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
from: Lokesh Vutla <lokeshvutla@ti.com>
- [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
from: Peter Ujfalusi <peter.ujfalusi@ti.com>
- [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]
from: Peter Ujfalusi <peter.ujfalusi@ti.com>
[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/
[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/
Changes in v2:
- fixed DT build warnings (Nishanth Menon)
v1: https://lore.kernel.org/patchwork/cover/1301067/
Grygorii Strashko (3):
arm64: dts: ti: k3-j7200-main: add main navss cpts node
arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
and phy defs
Peter Ujfalusi (1):
arm64: dts: ti: k3-j7200: add DMA support
.../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++
3 files changed, 236 insertions(+)
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Grygorii Strashko <grygorii.strashko@ti.com>
To: Peter Ujfalusi <peter.ujfalusi@ti.com>,
Tero Kristo <t-kristo@ti.com>, Rob Herring <robh+dt@kernel.org>,
Nishanth Menon <nm@ti.com>,
Kishon Vijay Abraham I <kishon@ti.com>
Cc: devicetree@vger.kernel.org,
Grygorii Strashko <grygorii.strashko@ti.com>,
Vignesh Raghavendra <vigneshr@ti.com>,
Sekhar Nori <nsekhar@ti.com>,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw
Date: Tue, 8 Sep 2020 19:59:38 +0300 [thread overview]
Message-ID: <20200908165942.32368-1-grygorii.strashko@ti.com> (raw)
Hi All,
arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes
This series adds DT nodes for TI J7200 SoC
- INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are compatible
with J721E Soc, to enable DMA support
- MCU CPSW2g DT nodes to enable networking
This series depends on:
- [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 Platform [1]
from: Lokesh Vutla <lokeshvutla@ti.com>
- [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2]
from: Peter Ujfalusi <peter.ujfalusi@ti.com>
- [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent parameters [3]
from: Peter Ujfalusi <peter.ujfalusi@ti.com>
[1] https://lore.kernel.org/linux-arm-kernel/20200827065144.17683-1-lokeshvutla@ti.com/T/#m141ae4d0dd818518c00c81806d689983d6e832e6
[2] https://lore.kernel.org/patchwork/patch/1283230/
[3] https://lore.kernel.org/lkml/20200904120009.30941-1-peter.ujfalusi@ti.com/
Changes in v2:
- fixed DT build warnings (Nishanth Menon)
v1: https://lore.kernel.org/patchwork/cover/1301067/
Grygorii Strashko (3):
arm64: dts: ti: k3-j7200-main: add main navss cpts node
arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node
arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux
and phy defs
Peter Ujfalusi (1):
arm64: dts: ti: k3-j7200: add DMA support
.../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++
arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++
.../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++
3 files changed, 236 insertions(+)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-09-08 17:00 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-09-08 16:59 Grygorii Strashko [this message]
2020-09-08 16:59 ` [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Grygorii Strashko
2020-09-08 16:59 ` [PATCH v2 1/4] arm64: dts: ti: k3-j7200: add DMA support Grygorii Strashko
2020-09-08 16:59 ` Grygorii Strashko
2020-09-08 16:59 ` [PATCH v2 2/4] arm64: dts: ti: k3-j7200-main: add main navss cpts node Grygorii Strashko
2020-09-08 16:59 ` Grygorii Strashko
2020-09-08 16:59 ` [PATCH v2 3/4] arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node Grygorii Strashko
2020-09-08 16:59 ` Grygorii Strashko
2020-09-08 16:59 ` [PATCH v2 4/4] arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Grygorii Strashko
2020-09-08 16:59 ` Grygorii Strashko
2020-09-10 7:38 ` [PATCH v2 0/4] arm64: dts: ti: k3-j7200: add dma and mcu cpsw Kishon Vijay Abraham I
2020-09-10 7:38 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200908165942.32368-1-grygorii.strashko@ti.com \
--to=grygorii.strashko@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=nsekhar@ti.com \
--cc=peter.ujfalusi@ti.com \
--cc=robh+dt@kernel.org \
--cc=s-anna@ti.com \
--cc=t-kristo@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.