From: Faiz Abbas <faiz_abbas@ti.com> To: <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Cc: <will@kernel.org>, <catalin.marinas@arm.com>, <nm@ti.com>, <t-kristo@ti.com>, <faiz_abbas@ti.com> Subject: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Date: Wed, 4 Nov 2020 00:38:21 +0530 [thread overview] Message-ID: <20201103190821.30937-1-faiz_abbas@ti.com> (raw) Add configs to enable regulators that supply power to the SD card on TI's J721e platform. These regulators are controlled by either SoC gpios or gpios over i2c expander. Changes to vmlinux size: Before: text data bss dec hex filename 20219067 10875634 523924 31618625 1e27641 vmlinux After: text data bss dec hex filename 20228755 10880422 524628 31633805 1e2b18d vmlinux delta: 15180 (dec) Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- Changes in v3: Added changes to vmlinux size in commit message Changes in v2: Squashed changes into a single patch v2: https://lore.kernel.org/linux-arm-kernel/20201102183005.14174-1-faiz_abbas@ti.com/ v1: https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/ arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 5cfe3cf6f2ac..bbf42faaddfe 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OMAP=y CONFIG_I2C_OWL=y CONFIG_I2C_PXA=y CONFIG_I2C_QCOM_CCI=m @@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y CONFIG_GPIO_ALTERA=m +CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MPC8XXX=y -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Faiz Abbas <faiz_abbas@ti.com> To: <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org> Cc: nm@ti.com, catalin.marinas@arm.com, faiz_abbas@ti.com, will@kernel.org, t-kristo@ti.com Subject: [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Date: Wed, 4 Nov 2020 00:38:21 +0530 [thread overview] Message-ID: <20201103190821.30937-1-faiz_abbas@ti.com> (raw) Add configs to enable regulators that supply power to the SD card on TI's J721e platform. These regulators are controlled by either SoC gpios or gpios over i2c expander. Changes to vmlinux size: Before: text data bss dec hex filename 20219067 10875634 523924 31618625 1e27641 vmlinux After: text data bss dec hex filename 20228755 10880422 524628 31633805 1e2b18d vmlinux delta: 15180 (dec) Acked-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> --- Changes in v3: Added changes to vmlinux size in commit message Changes in v2: Squashed changes into a single patch v2: https://lore.kernel.org/linux-arm-kernel/20201102183005.14174-1-faiz_abbas@ti.com/ v1: https://lore.kernel.org/linux-arm-kernel/20201002164535.9920-1-faiz_abbas@ti.com/ arch/arm64/configs/defconfig | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 5cfe3cf6f2ac..bbf42faaddfe 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -438,6 +438,7 @@ CONFIG_I2C_IMX=y CONFIG_I2C_IMX_LPI2C=y CONFIG_I2C_MESON=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_OMAP=y CONFIG_I2C_OWL=y CONFIG_I2C_PXA=y CONFIG_I2C_QCOM_CCI=m @@ -497,6 +498,7 @@ CONFIG_PINCTRL_SDM845=y CONFIG_PINCTRL_SM8150=y CONFIG_PINCTRL_SM8250=y CONFIG_GPIO_ALTERA=m +CONFIG_GPIO_DAVINCI=y CONFIG_GPIO_DWAPB=y CONFIG_GPIO_MB86S7X=y CONFIG_GPIO_MPC8XXX=y -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-11-03 19:08 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-11-03 19:08 Faiz Abbas [this message] 2020-11-03 19:08 ` [PATCH v3] arm64: defconfig: Enable GPIO and I2C configs for TI's J721e platform Faiz Abbas 2020-11-12 17:51 ` Nishanth Menon 2020-11-12 17:51 ` Nishanth Menon 2020-11-13 15:49 Sekhar Nori 2020-11-13 15:49 ` Sekhar Nori 2020-11-13 17:04 ` Nishanth Menon 2020-11-13 17:04 ` Nishanth Menon 2020-11-13 17:15 ` Sekhar Nori 2020-11-13 17:15 ` Sekhar Nori 2020-11-13 18:33 ` Nishanth Menon 2020-11-13 18:33 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201103190821.30937-1-faiz_abbas@ti.com \ --to=faiz_abbas@ti.com \ --cc=catalin.marinas@arm.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=t-kristo@ti.com \ --cc=will@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.