All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dong Aisheng <aisheng.dong@nxp.com>
To: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-imx@nxp.com,
	linux-mmc@vger.kernel.org, Dong Aisheng <aisheng.dong@nxp.com>
Subject: [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Thu, 26 Nov 2020 18:58:42 +0800	[thread overview]
Message-ID: <20201126105900.26658-1-aisheng.dong@nxp.com> (raw)

IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
(Subsystems), those SS may be shared between different SoCs while most of them
can be reused like Devices Resources, Clocks, Power domains and etc.

This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.

ChangeLog:
v4-resend:
 * no change except put three module binding patches first which are used
   by this patchset.
v3->v4:
 * mainly rebase to latest kernel except a few very minor changes like change to use
   new scu protocol binding which was not supported in last version
v2->v3:
 * use clock-indices property instead of bit-offset property suggested by Shawn Guo
 * rebase to latest shawn/for-next
v1->v2:
 * change to the new two cells scu clock binding, so original adding scu clocks
   patches were removed.
 * Move scu pd node above clk node


Dong Aisheng (18):
  dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible
    string
  dt-bindings: arm: fsl: add imx8qm boards compatible string
  dt-bindings: mailbox: mu: add imx8qm support
  arm64: dts: imx8qxp: add fallback compatible string for scu pd
  arm64: dts: imx8qxp: move scu pd node before scu clock node
  arm64: dts: imx8qxp: orginize dts in subsystems
  arm64: dts: imx8: add lsio lpcg clocks
  arm64: dts: imx8: add conn lpcg clocks
  arm64: dts: imx8: add adma lpcg clocks
  arm64: dts: imx8: switch to two cell scu clock binding
  arm64: dts: imx8: switch to new lpcg clock binding
  arm64: dts: imx8qm: add lsio ss support
  arm64: dts: imx8qm: add conn ss support
  arm64: dts: imx8: split adma ss into dma and audio ss
  arm64: dts: imx8qm: add dma ss support
  arm64: dts: imx: add imx8qm common dts file
  arm64: dts: imx: add imx8qm mek support
  arm64: defconfig: add imx8qm mek support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/mailbox/fsl,mu.yaml   |   5 +-
 .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
 .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 184 ++++++++
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  18 +
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
 .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 176 ++++++++
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
 .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
 .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  50 +--
 .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
 .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
 .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 423 ++----------------
 arch/arm64/configs/defconfig                  |   1 +
 24 files changed, 1455 insertions(+), 439 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi

-- 
2.23.0


WARNING: multiple messages have this Message-ID (diff)
From: Dong Aisheng <aisheng.dong@nxp.com>
To: devicetree@vger.kernel.org
Cc: Dong Aisheng <aisheng.dong@nxp.com>,
	linux-mmc@vger.kernel.org, linux-imx@nxp.com,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Thu, 26 Nov 2020 18:58:42 +0800	[thread overview]
Message-ID: <20201126105900.26658-1-aisheng.dong@nxp.com> (raw)

IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
(Subsystems), those SS may be shared between different SoCs while most of them
can be reused like Devices Resources, Clocks, Power domains and etc.

This patch series aims to improve the MX8 architecture to comply with the HW
design to save a lot of duplicated codes and benefits us a better
maintainability and scalability in the future.

ChangeLog:
v4-resend:
 * no change except put three module binding patches first which are used
   by this patchset.
v3->v4:
 * mainly rebase to latest kernel except a few very minor changes like change to use
   new scu protocol binding which was not supported in last version
v2->v3:
 * use clock-indices property instead of bit-offset property suggested by Shawn Guo
 * rebase to latest shawn/for-next
v1->v2:
 * change to the new two cells scu clock binding, so original adding scu clocks
   patches were removed.
 * Move scu pd node above clk node


Dong Aisheng (18):
  dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible
    string
  dt-bindings: arm: fsl: add imx8qm boards compatible string
  dt-bindings: mailbox: mu: add imx8qm support
  arm64: dts: imx8qxp: add fallback compatible string for scu pd
  arm64: dts: imx8qxp: move scu pd node before scu clock node
  arm64: dts: imx8qxp: orginize dts in subsystems
  arm64: dts: imx8: add lsio lpcg clocks
  arm64: dts: imx8: add conn lpcg clocks
  arm64: dts: imx8: add adma lpcg clocks
  arm64: dts: imx8: switch to two cell scu clock binding
  arm64: dts: imx8: switch to new lpcg clock binding
  arm64: dts: imx8qm: add lsio ss support
  arm64: dts: imx8qm: add conn ss support
  arm64: dts: imx8: split adma ss into dma and audio ss
  arm64: dts: imx8qm: add dma ss support
  arm64: dts: imx: add imx8qm common dts file
  arm64: dts: imx: add imx8qm mek support
  arm64: defconfig: add imx8qm mek support

 .../devicetree/bindings/arm/fsl.yaml          |   6 +
 .../devicetree/bindings/mailbox/fsl,mu.yaml   |   5 +-
 .../bindings/mmc/fsl-imx-esdhc.yaml           |   1 +
 arch/arm64/boot/dts/freescale/Makefile        |   1 +
 .../boot/dts/freescale/imx8-ss-adma.dtsi      |   8 +
 .../boot/dts/freescale/imx8-ss-audio.dtsi     |  68 +++
 .../boot/dts/freescale/imx8-ss-conn.dtsi      | 184 ++++++++
 .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi |  18 +
 .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
 .../boot/dts/freescale/imx8-ss-lsio.dtsi      | 311 +++++++++++++
 arch/arm64/boot/dts/freescale/imx8qm-mek.dts  | 144 ++++++
 .../boot/dts/freescale/imx8qm-ss-conn.dtsi    |  21 +
 .../boot/dts/freescale/imx8qm-ss-dma.dtsi     |  51 +++
 .../boot/dts/freescale/imx8qm-ss-lsio.dtsi    |  61 +++
 arch/arm64/boot/dts/freescale/imx8qm.dtsi     | 176 ++++++++
 .../boot/dts/freescale/imx8qxp-ai_ml.dts      |  20 +-
 .../freescale/imx8qxp-colibri-eval-v3.dtsi    |   8 +-
 .../boot/dts/freescale/imx8qxp-colibri.dtsi   |  12 +-
 arch/arm64/boot/dts/freescale/imx8qxp-mek.dts |  50 +--
 .../boot/dts/freescale/imx8qxp-ss-adma.dtsi   |  37 ++
 .../boot/dts/freescale/imx8qxp-ss-conn.dtsi   |  25 ++
 .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi   |  61 +++
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi    | 423 ++----------------
 arch/arm64/configs/defconfig                  |   1 +
 24 files changed, 1455 insertions(+), 439 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
 create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi

-- 
2.23.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2020-11-26 11:16 UTC|newest]

Thread overview: 54+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-26 10:58 Dong Aisheng [this message]
2020-11-26 10:58 ` [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 01/18] dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 12:09   ` Krzysztof Kozlowski
2020-11-26 12:09     ` Krzysztof Kozlowski
2020-12-01  1:39   ` Rob Herring
2020-12-01  1:39     ` Rob Herring
2020-12-04 14:38   ` Ulf Hansson
2020-12-04 14:38     ` Ulf Hansson
2020-11-26 10:58 ` [PATCH RESEND v4 02/18] dt-bindings: arm: fsl: add imx8qm boards " Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-12-01  1:39   ` Rob Herring
2020-12-01  1:39     ` Rob Herring
2020-11-26 10:58 ` [PATCH RESEND v4 03/18] dt-bindings: mailbox: mu: add imx8qm support Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-12-01  1:40   ` Rob Herring
2020-12-01  1:40     ` Rob Herring
2020-11-26 10:58 ` [PATCH RESEND v4 04/18] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 05/18] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 06/18] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 07/18] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 08/18] arm64: dts: imx8: add conn " Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 09/18] arm64: dts: imx8: add adma " Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 10/18] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 11/18] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 12/18] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 13/18] arm64: dts: imx8qm: add conn " Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-27  2:11   ` Bough Chen
2020-11-27  2:11     ` Bough Chen
2020-11-26 10:58 ` [PATCH RESEND v4 14/18] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 15/18] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 16/18] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:58 ` [PATCH RESEND v4 17/18] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2020-11-26 10:58   ` Dong Aisheng
2020-11-26 10:59 ` [PATCH RESEND v4 18/18] arm64: defconfig: " Dong Aisheng
2020-11-26 10:59   ` Dong Aisheng
2021-02-26  8:33 ` [PATCH RESEND v4 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Aisheng Dong
2021-02-26  8:33   ` Aisheng Dong
2021-03-02  9:42   ` Shawn Guo
2021-03-02  9:42     ` Shawn Guo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201126105900.26658-1-aisheng.dong@nxp.com \
    --to=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-mmc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.