All of lore.kernel.org
 help / color / mirror / Atom feed
From: Santosh Sivaraj <santosh@fossix.org>
To: Linux NVDIMM <linux-nvdimm@lists.01.org>,
	Vishal Verma <vishal.l.verma@intel.com>,
	"Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>,
	Vaibhav Jain <vaibhav@linux.ibm.com>,
	Shivaprasad G Bhat <sbhat@linux.ibm.com>,
	Harish Sriram <harish@linux.ibm.com>,
	Dan Williams <dan.j.williams@intel.com>
Cc: Santosh Sivaraj <santosh@fossix.org>
Subject: [RFC v5 1/7] testing/nvdimm: Add test module for non-nfit platforms
Date: Mon, 14 Dec 2020 16:08:53 +0530	[thread overview]
Message-ID: <20201214103859.2409175-2-santosh@fossix.org> (raw)
In-Reply-To: <20201214103859.2409175-1-santosh@fossix.org>

The current test module cannot be used for testing platforms (make check)
that do not have support for NFIT. In order to get the ndctl tests working,
we need a module which can emulate NVDIMM devices without relying on
ACPI/NFIT.

The aim of this proposed module is to implement a similar functionality to
the existing module but without the ACPI dependencies.

This RFC series is split into reviewable and compilable chunks.

This patch adds a new driver and registers two nvdimm bus needed for ndctl
make check.

Signed-off-by: Santosh Sivaraj <santosh@fossix.org>
---
 tools/testing/nvdimm/config_check.c |   3 +-
 tools/testing/nvdimm/test/Kbuild    |   6 +-
 tools/testing/nvdimm/test/ndtest.c  | 206 ++++++++++++++++++++++++++++
 tools/testing/nvdimm/test/ndtest.h  |  16 +++
 4 files changed, 229 insertions(+), 2 deletions(-)
 create mode 100644 tools/testing/nvdimm/test/ndtest.c
 create mode 100644 tools/testing/nvdimm/test/ndtest.h

diff --git a/tools/testing/nvdimm/config_check.c b/tools/testing/nvdimm/config_check.c
index cac891028cd1..3e3a5f518864 100644
--- a/tools/testing/nvdimm/config_check.c
+++ b/tools/testing/nvdimm/config_check.c
@@ -12,7 +12,8 @@ void check(void)
 	BUILD_BUG_ON(!IS_MODULE(CONFIG_ND_BTT));
 	BUILD_BUG_ON(!IS_MODULE(CONFIG_ND_PFN));
 	BUILD_BUG_ON(!IS_MODULE(CONFIG_ND_BLK));
-	BUILD_BUG_ON(!IS_MODULE(CONFIG_ACPI_NFIT));
+	if (IS_ENABLED(CONFIG_ACPI_NFIT))
+		BUILD_BUG_ON(!IS_MODULE(CONFIG_ACPI_NFIT));
 	BUILD_BUG_ON(!IS_MODULE(CONFIG_DEV_DAX));
 	BUILD_BUG_ON(!IS_MODULE(CONFIG_DEV_DAX_PMEM));
 }
diff --git a/tools/testing/nvdimm/test/Kbuild b/tools/testing/nvdimm/test/Kbuild
index 75baebf8f4ba..197bcb2b7f35 100644
--- a/tools/testing/nvdimm/test/Kbuild
+++ b/tools/testing/nvdimm/test/Kbuild
@@ -5,5 +5,9 @@ ccflags-y += -I$(srctree)/drivers/acpi/nfit/
 obj-m += nfit_test.o
 obj-m += nfit_test_iomap.o
 
-nfit_test-y := nfit.o
+ifeq  ($(CONFIG_ACPI_NFIT),m)
+	nfit_test-y := nfit.o
+else
+	nfit_test-y := ndtest.o
+endif
 nfit_test_iomap-y := iomap.o
diff --git a/tools/testing/nvdimm/test/ndtest.c b/tools/testing/nvdimm/test/ndtest.c
new file mode 100644
index 000000000000..f89d74fdcdee
--- /dev/null
+++ b/tools/testing/nvdimm/test/ndtest.c
@@ -0,0 +1,206 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/genalloc.h>
+#include <linux/vmalloc.h>
+#include <linux/dma-mapping.h>
+#include <linux/list_sort.h>
+#include <linux/libnvdimm.h>
+#include <linux/ndctl.h>
+#include <nd-core.h>
+#include <linux/printk.h>
+#include <linux/seq_buf.h>
+
+#include "../watermark.h"
+#include "nfit_test.h"
+#include "ndtest.h"
+
+enum {
+	DIMM_SIZE = SZ_32M,
+	LABEL_SIZE = SZ_128K,
+	NUM_INSTANCES = 2,
+	NUM_DCR = 4,
+};
+
+static struct ndtest_priv *instances[NUM_INSTANCES];
+static struct class *ndtest_dimm_class;
+
+static inline struct ndtest_priv *to_ndtest_priv(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+
+	return container_of(pdev, struct ndtest_priv, pdev);
+}
+
+static int ndtest_ctl(struct nvdimm_bus_descriptor *nd_desc,
+		      struct nvdimm *nvdimm, unsigned int cmd, void *buf,
+		      unsigned int buf_len, int *cmd_rc)
+{
+	struct ndtest_dimm *dimm;
+	int _cmd_rc;
+
+	if (!cmd_rc)
+		cmd_rc = &_cmd_rc;
+
+	*cmd_rc = 0;
+
+	if (!nvdimm)
+		return -EINVAL;
+
+	dimm = nvdimm_provider_data(nvdimm);
+	if (!dimm)
+		return -EINVAL;
+
+	switch (cmd) {
+	case ND_CMD_GET_CONFIG_SIZE:
+	case ND_CMD_GET_CONFIG_DATA:
+	case ND_CMD_SET_CONFIG_DATA:
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ndtest_bus_register(struct ndtest_priv *p)
+{
+	p->bus_desc.ndctl = ndtest_ctl;
+	p->bus_desc.module = THIS_MODULE;
+	p->bus_desc.provider_name = NULL;
+
+	p->bus = nvdimm_bus_register(&p->pdev.dev, &p->bus_desc);
+	if (!p->bus) {
+		dev_err(&p->pdev.dev, "Error creating nvdimm bus %pOF\n", p->dn);
+		return -ENOMEM;
+	}
+
+	return 0;
+}
+
+static int ndtest_remove(struct platform_device *pdev)
+{
+	struct ndtest_priv *p = to_ndtest_priv(&pdev->dev);
+
+	nvdimm_bus_unregister(p->bus);
+	return 0;
+}
+
+static int ndtest_probe(struct platform_device *pdev)
+{
+	struct ndtest_priv *p;
+
+	p = to_ndtest_priv(&pdev->dev);
+	if (ndtest_bus_register(p))
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, p);
+
+	return 0;
+}
+
+static const struct platform_device_id ndtest_id[] = {
+	{ KBUILD_MODNAME },
+	{ },
+};
+
+static struct platform_driver ndtest_driver = {
+	.probe = ndtest_probe,
+	.remove = ndtest_remove,
+	.driver = {
+		.name = KBUILD_MODNAME,
+	},
+	.id_table = ndtest_id,
+};
+
+static void ndtest_release(struct device *dev)
+{
+	struct ndtest_priv *p = to_ndtest_priv(dev);
+
+	kfree(p);
+}
+
+static void cleanup_devices(void)
+{
+	int i;
+
+	for (i = 0; i < NUM_INSTANCES; i++)
+		if (instances[i])
+			platform_device_unregister(&instances[i]->pdev);
+
+	nfit_test_teardown();
+
+	if (ndtest_dimm_class)
+		class_destroy(ndtest_dimm_class);
+}
+
+static __init int ndtest_init(void)
+{
+	int rc, i;
+
+	pmem_test();
+	libnvdimm_test();
+	device_dax_test();
+	dax_pmem_test();
+	dax_pmem_core_test();
+#ifdef CONFIG_DEV_DAX_PMEM_COMPAT
+	dax_pmem_compat_test();
+#endif
+
+	ndtest_dimm_class = class_create(THIS_MODULE, "nfit_test_dimm");
+	if (IS_ERR(ndtest_dimm_class)) {
+		rc = PTR_ERR(ndtest_dimm_class);
+		goto err_register;
+	}
+
+	/* Each instance can be taken as a bus, which can have multiple dimms */
+	for (i = 0; i < NUM_INSTANCES; i++) {
+		struct ndtest_priv *priv;
+		struct platform_device *pdev;
+
+		priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+		if (!priv) {
+			rc = -ENOMEM;
+			goto err_register;
+		}
+
+		INIT_LIST_HEAD(&priv->resources);
+		pdev = &priv->pdev;
+		pdev->name = KBUILD_MODNAME;
+		pdev->id = i;
+		pdev->dev.release = ndtest_release;
+		rc = platform_device_register(pdev);
+		if (rc) {
+			put_device(&pdev->dev);
+			goto err_register;
+		}
+		get_device(&pdev->dev);
+
+		instances[i] = priv;
+	}
+
+	rc = platform_driver_register(&ndtest_driver);
+	if (rc)
+		goto err_register;
+
+	return 0;
+
+err_register:
+	pr_err("Error registering platform device\n");
+	cleanup_devices();
+
+	return rc;
+}
+
+static __exit void ndtest_exit(void)
+{
+	cleanup_devices();
+	platform_driver_unregister(&ndtest_driver);
+}
+
+module_init(ndtest_init);
+module_exit(ndtest_exit);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("IBM Corporation");
diff --git a/tools/testing/nvdimm/test/ndtest.h b/tools/testing/nvdimm/test/ndtest.h
new file mode 100644
index 000000000000..831ac5c65f50
--- /dev/null
+++ b/tools/testing/nvdimm/test/ndtest.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef NDTEST_H
+#define NDTEST_H
+
+#include <linux/platform_device.h>
+#include <linux/libnvdimm.h>
+
+struct ndtest_priv {
+	struct platform_device pdev;
+	struct device_node *dn;
+	struct list_head resources;
+	struct nvdimm_bus_descriptor bus_desc;
+	struct nvdimm_bus *bus;
+};
+
+#endif /* NDTEST_H */
-- 
2.26.2
_______________________________________________
Linux-nvdimm mailing list -- linux-nvdimm@lists.01.org
To unsubscribe send an email to linux-nvdimm-leave@lists.01.org

  reply	other threads:[~2020-12-14 10:39 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-14 10:38 [RFC v5 0/7] PMEM device emulation without nfit depenency Santosh Sivaraj
2020-12-14 10:38 ` Santosh Sivaraj [this message]
2020-12-16  5:05   ` [RFC v5 1/7] testing/nvdimm: Add test module for non-nfit platforms Dan Williams
2020-12-17  7:16     ` Santosh Sivaraj
2021-01-28  5:41   ` Dan Williams
2020-12-14 10:38 ` [RFC v5 2/7] ndtest: Add compatability string to treat it as PAPR family Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 3/7] ndtest: Add dimms to the two buses Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 4/7] ndtest: Add dimm attributes Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 5/7] ndtest: Add regions and mappings to the test buses Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 6/7] ndtest: Add nvdimm control functions Santosh Sivaraj
2020-12-14 10:38 ` [RFC v5 7/7] ndtest: Add papr health related flags Santosh Sivaraj
2020-12-14 10:41 ` [ndctl RFC v5 1/5] libndctl: test enablement for non-nfit devices Santosh Sivaraj
2020-12-14 10:41   ` [ndctl RFC v5 2/5] test: Don't skip tests if nfit modules are missing Santosh Sivaraj
2020-12-14 10:41   ` [ndctl RFC v5 3/5] papr: Add support to parse save_fail flag for dimm Santosh Sivaraj
2020-12-14 10:41   ` [ndctl RFC v5 4/5] test/libndctl: skip SMART tests on non-nfit devices Santosh Sivaraj
2020-12-14 10:41   ` [ndctl RFC v5 5/5] Use page size as alignment value Santosh Sivaraj
2020-12-15 23:21 ` [RFC v5 0/7] PMEM device emulation without nfit depenency Dan Williams
2020-12-17  7:23   ` Santosh Sivaraj
2021-01-28  8:12 ` Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201214103859.2409175-2-santosh@fossix.org \
    --to=santosh@fossix.org \
    --cc=aneesh.kumar@linux.ibm.com \
    --cc=dan.j.williams@intel.com \
    --cc=harish@linux.ibm.com \
    --cc=linux-nvdimm@lists.01.org \
    --cc=sbhat@linux.ibm.com \
    --cc=vaibhav@linux.ibm.com \
    --cc=vishal.l.verma@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.