From: Sergio Paracuellos <sergio.paracuellos@gmail.com> To: sboyd@kernel.org Cc: robh+dt@kernel.org, john@phrozen.org, tsbogend@alpha.franken.de, gregkh@linuxfoundation.org, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-mips@vger.kernel.org, devel@driverdev.osuosl.org, neil@brown.name, linux-kernel@vger.kernel.org Subject: [PATCH v11 4/6] staging: mt7621-dts: make use of new 'mt7621-clk' Date: Tue, 9 Mar 2021 06:22:24 +0100 [thread overview] Message-ID: <20210309052226.29531-5-sergio.paracuellos@gmail.com> (raw) In-Reply-To: <20210309052226.29531-1-sergio.paracuellos@gmail.com> Clocks for SoC mt7621 have been properly integrated so there is no need to declare fixed clocks at all in the device tree. Remove all of them, add new device tree nodes for mt7621-clk and update the rest of the nodes to use them. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- drivers/staging/mt7621-dts/gbpc1.dts | 11 ---- drivers/staging/mt7621-dts/mt7621.dtsi | 74 ++++++++++++-------------- 2 files changed, 33 insertions(+), 52 deletions(-) diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts index a7c0d3115d72..7716d0efe524 100644 --- a/drivers/staging/mt7621-dts/gbpc1.dts +++ b/drivers/staging/mt7621-dts/gbpc1.dts @@ -100,17 +100,6 @@ partition@50000 { }; }; -&sysclock { - compatible = "fixed-clock"; - /* This is normally 1/4 of cpuclock */ - clock-frequency = <225000000>; -}; - -&cpuclock { - compatible = "fixed-clock"; - clock-frequency = <900000000>; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi index 16fc94f65486..b68183e7e6ad 100644 --- a/drivers/staging/mt7621-dts/mt7621.dtsi +++ b/drivers/staging/mt7621-dts/mt7621.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/interrupt-controller/mips-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/mt7621-clk.h> / { #address-cells = <1>; @@ -27,27 +28,6 @@ aliases { serial0 = &uartlite; }; - cpuclock: cpuclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* FIXME: there should be way to detect this */ - clock-frequency = <880000000>; - }; - - sysclock: sysclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* This is normally 1/4 of cpuclock */ - clock-frequency = <220000000>; - }; - - mmc_clock: mmc_clock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; mmc_fixed_3v3: fixedregulator@0 { compatible = "regulator-fixed"; @@ -76,8 +56,13 @@ palmbus: palmbus@1E000000 { #size-cells = <1>; sysc: sysc@0 { - compatible = "mtk,mt7621-sysc"; + compatible = "mtk,mt7621-sysc", "syscon"; reg = <0x0 0x100>; + #clock-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; }; wdt: wdt@100 { @@ -101,8 +86,8 @@ i2c: i2c@900 { compatible = "mediatek,mt7621-i2c"; reg = <0x900 0x100>; - clocks = <&sysclock>; - + clocks = <&sysc MT7621_CLK_I2C>; + clock-names = "i2c"; resets = <&rstctrl 16>; reset-names = "i2c"; @@ -119,8 +104,8 @@ i2s: i2s@a00 { compatible = "mediatek,mt7621-i2s"; reg = <0xa00 0x100>; - clocks = <&sysclock>; - + clocks = <&sysc MT7621_CLK_I2S>; + clock-names = "i2s"; resets = <&rstctrl 17>; reset-names = "i2s"; @@ -138,7 +123,7 @@ i2s: i2s@a00 { }; memc: memc@5000 { - compatible = "mtk,mt7621-memc"; + compatible = "mtk,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; @@ -156,8 +141,8 @@ uartlite: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; - clocks = <&sysclock>; - clock-frequency = <50000000>; + clocks = <&sysc MT7621_CLK_UART1>; + clock-names = "uart1"; interrupt-parent = <&gic>; interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; @@ -173,7 +158,8 @@ spi0: spi@b00 { compatible = "ralink,mt7621-spi"; reg = <0xb00 0x100>; - clocks = <&sysclock>; + clocks = <&sysc MT7621_CLK_SPI>; + clock-names = "spi"; resets = <&rstctrl 18>; reset-names = "spi"; @@ -189,6 +175,8 @@ gdma: gdma@2800 { compatible = "ralink,rt3883-gdma"; reg = <0x2800 0x800>; + clocks = <&sysc MT7621_CLK_GDMA>; + clock-names = "gdma"; resets = <&rstctrl 14>; reset-names = "dma"; @@ -206,6 +194,8 @@ hsdma: hsdma@7000 { compatible = "mediatek,mt7621-hsdma"; reg = <0x7000 0x1000>; + clocks = <&sysc MT7621_CLK_HSDMA>; + clock-names = "hsdma"; resets = <&rstctrl 5>; reset-names = "hsdma"; @@ -311,11 +301,6 @@ rstctrl: rstctrl { #reset-cells = <1>; }; - clkctrl: clkctrl { - compatible = "ralink,rt2880-clock"; - #clock-cells = <1>; - }; - sdhci: sdhci@1E130000 { status = "disabled"; @@ -334,7 +319,8 @@ sdhci: sdhci@1E130000 { pinctrl-0 = <&sdhci_pins>; pinctrl-1 = <&sdhci_pins>; - clocks = <&mmc_clock &mmc_clock>; + clocks = <&sysc MT7621_CLK_SHXC>, + <&sysc MT7621_CLK_50M>; clock-names = "source", "hclk"; interrupt-parent = <&gic>; @@ -349,7 +335,7 @@ xhci: xhci@1E1C0000 { 0x1e1d0700 0x0100>; reg-names = "mac", "ippc"; - clocks = <&sysclock>; + clocks = <&sysc MT7621_CLK_XTAL>; clock-names = "sys_ck"; interrupt-parent = <&gic>; @@ -368,7 +354,7 @@ gic: interrupt-controller@1fbc0000 { timer { compatible = "mti,gic-timer"; interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; - clocks = <&cpuclock>; + clocks = <&sysc MT7621_CLK_CPU>; }; }; @@ -381,6 +367,9 @@ nand: nand@1e003000 { 0x1e003800 0x800>; #address-cells = <1>; #size-cells = <1>; + + clocks = <&sysc MT7621_CLK_NAND>; + clock-names = "nand"; }; ethsys: syscon@1e000000 { @@ -394,8 +383,9 @@ ethernet: ethernet@1e100000 { compatible = "mediatek,mt7621-eth"; reg = <0x1e100000 0x10000>; - clocks = <&sysclock>; - clock-names = "ethif"; + clocks = <&sysc MT7621_CLK_FE>, + <&sysc MT7621_CLK_ETH>; + clock-names = "fe", "ethif"; #address-cells = <1>; #size-cells = <0>; @@ -521,7 +511,9 @@ GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>; reset-names = "pcie0", "pcie1", "pcie2"; - clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>; + clocks = <&sysc MT7621_CLK_PCIE0>, + <&sysc MT7621_CLK_PCIE1>, + <&sysc MT7621_CLK_PCIE2>; clock-names = "pcie0", "pcie1", "pcie2"; phys = <&pcie0_phy 1>, <&pcie2_phy 0>; phy-names = "pcie-phy0", "pcie-phy2"; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Sergio Paracuellos <sergio.paracuellos@gmail.com> To: sboyd@kernel.org Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org, tsbogend@alpha.franken.de, gregkh@linuxfoundation.org, linux-mips@vger.kernel.org, linux-kernel@vger.kernel.org, robh+dt@kernel.org, john@phrozen.org, neil@brown.name, linux-clk@vger.kernel.org Subject: [PATCH v11 4/6] staging: mt7621-dts: make use of new 'mt7621-clk' Date: Tue, 9 Mar 2021 06:22:24 +0100 [thread overview] Message-ID: <20210309052226.29531-5-sergio.paracuellos@gmail.com> (raw) In-Reply-To: <20210309052226.29531-1-sergio.paracuellos@gmail.com> Clocks for SoC mt7621 have been properly integrated so there is no need to declare fixed clocks at all in the device tree. Remove all of them, add new device tree nodes for mt7621-clk and update the rest of the nodes to use them. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> --- drivers/staging/mt7621-dts/gbpc1.dts | 11 ---- drivers/staging/mt7621-dts/mt7621.dtsi | 74 ++++++++++++-------------- 2 files changed, 33 insertions(+), 52 deletions(-) diff --git a/drivers/staging/mt7621-dts/gbpc1.dts b/drivers/staging/mt7621-dts/gbpc1.dts index a7c0d3115d72..7716d0efe524 100644 --- a/drivers/staging/mt7621-dts/gbpc1.dts +++ b/drivers/staging/mt7621-dts/gbpc1.dts @@ -100,17 +100,6 @@ partition@50000 { }; }; -&sysclock { - compatible = "fixed-clock"; - /* This is normally 1/4 of cpuclock */ - clock-frequency = <225000000>; -}; - -&cpuclock { - compatible = "fixed-clock"; - clock-frequency = <900000000>; -}; - &pcie { pinctrl-names = "default"; pinctrl-0 = <&pcie_pins>; diff --git a/drivers/staging/mt7621-dts/mt7621.dtsi b/drivers/staging/mt7621-dts/mt7621.dtsi index 16fc94f65486..b68183e7e6ad 100644 --- a/drivers/staging/mt7621-dts/mt7621.dtsi +++ b/drivers/staging/mt7621-dts/mt7621.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/interrupt-controller/mips-gic.h> #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/mt7621-clk.h> / { #address-cells = <1>; @@ -27,27 +28,6 @@ aliases { serial0 = &uartlite; }; - cpuclock: cpuclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* FIXME: there should be way to detect this */ - clock-frequency = <880000000>; - }; - - sysclock: sysclock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - - /* This is normally 1/4 of cpuclock */ - clock-frequency = <220000000>; - }; - - mmc_clock: mmc_clock@0 { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <48000000>; - }; mmc_fixed_3v3: fixedregulator@0 { compatible = "regulator-fixed"; @@ -76,8 +56,13 @@ palmbus: palmbus@1E000000 { #size-cells = <1>; sysc: sysc@0 { - compatible = "mtk,mt7621-sysc"; + compatible = "mtk,mt7621-sysc", "syscon"; reg = <0x0 0x100>; + #clock-cells = <1>; + ralink,memctl = <&memc>; + clock-output-names = "xtal", "cpu", "bus", + "50m", "125m", "150m", + "250m", "270m"; }; wdt: wdt@100 { @@ -101,8 +86,8 @@ i2c: i2c@900 { compatible = "mediatek,mt7621-i2c"; reg = <0x900 0x100>; - clocks = <&sysclock>; - + clocks = <&sysc MT7621_CLK_I2C>; + clock-names = "i2c"; resets = <&rstctrl 16>; reset-names = "i2c"; @@ -119,8 +104,8 @@ i2s: i2s@a00 { compatible = "mediatek,mt7621-i2s"; reg = <0xa00 0x100>; - clocks = <&sysclock>; - + clocks = <&sysc MT7621_CLK_I2S>; + clock-names = "i2s"; resets = <&rstctrl 17>; reset-names = "i2s"; @@ -138,7 +123,7 @@ i2s: i2s@a00 { }; memc: memc@5000 { - compatible = "mtk,mt7621-memc"; + compatible = "mtk,mt7621-memc", "syscon"; reg = <0x5000 0x1000>; }; @@ -156,8 +141,8 @@ uartlite: uartlite@c00 { compatible = "ns16550a"; reg = <0xc00 0x100>; - clocks = <&sysclock>; - clock-frequency = <50000000>; + clocks = <&sysc MT7621_CLK_UART1>; + clock-names = "uart1"; interrupt-parent = <&gic>; interrupts = <GIC_SHARED 26 IRQ_TYPE_LEVEL_HIGH>; @@ -173,7 +158,8 @@ spi0: spi@b00 { compatible = "ralink,mt7621-spi"; reg = <0xb00 0x100>; - clocks = <&sysclock>; + clocks = <&sysc MT7621_CLK_SPI>; + clock-names = "spi"; resets = <&rstctrl 18>; reset-names = "spi"; @@ -189,6 +175,8 @@ gdma: gdma@2800 { compatible = "ralink,rt3883-gdma"; reg = <0x2800 0x800>; + clocks = <&sysc MT7621_CLK_GDMA>; + clock-names = "gdma"; resets = <&rstctrl 14>; reset-names = "dma"; @@ -206,6 +194,8 @@ hsdma: hsdma@7000 { compatible = "mediatek,mt7621-hsdma"; reg = <0x7000 0x1000>; + clocks = <&sysc MT7621_CLK_HSDMA>; + clock-names = "hsdma"; resets = <&rstctrl 5>; reset-names = "hsdma"; @@ -311,11 +301,6 @@ rstctrl: rstctrl { #reset-cells = <1>; }; - clkctrl: clkctrl { - compatible = "ralink,rt2880-clock"; - #clock-cells = <1>; - }; - sdhci: sdhci@1E130000 { status = "disabled"; @@ -334,7 +319,8 @@ sdhci: sdhci@1E130000 { pinctrl-0 = <&sdhci_pins>; pinctrl-1 = <&sdhci_pins>; - clocks = <&mmc_clock &mmc_clock>; + clocks = <&sysc MT7621_CLK_SHXC>, + <&sysc MT7621_CLK_50M>; clock-names = "source", "hclk"; interrupt-parent = <&gic>; @@ -349,7 +335,7 @@ xhci: xhci@1E1C0000 { 0x1e1d0700 0x0100>; reg-names = "mac", "ippc"; - clocks = <&sysclock>; + clocks = <&sysc MT7621_CLK_XTAL>; clock-names = "sys_ck"; interrupt-parent = <&gic>; @@ -368,7 +354,7 @@ gic: interrupt-controller@1fbc0000 { timer { compatible = "mti,gic-timer"; interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>; - clocks = <&cpuclock>; + clocks = <&sysc MT7621_CLK_CPU>; }; }; @@ -381,6 +367,9 @@ nand: nand@1e003000 { 0x1e003800 0x800>; #address-cells = <1>; #size-cells = <1>; + + clocks = <&sysc MT7621_CLK_NAND>; + clock-names = "nand"; }; ethsys: syscon@1e000000 { @@ -394,8 +383,9 @@ ethernet: ethernet@1e100000 { compatible = "mediatek,mt7621-eth"; reg = <0x1e100000 0x10000>; - clocks = <&sysclock>; - clock-names = "ethif"; + clocks = <&sysc MT7621_CLK_FE>, + <&sysc MT7621_CLK_ETH>; + clock-names = "fe", "ethif"; #address-cells = <1>; #size-cells = <0>; @@ -521,7 +511,9 @@ GIC_SHARED 24 IRQ_TYPE_LEVEL_HIGH resets = <&rstctrl 24 &rstctrl 25 &rstctrl 26>; reset-names = "pcie0", "pcie1", "pcie2"; - clocks = <&clkctrl 24 &clkctrl 25 &clkctrl 26>; + clocks = <&sysc MT7621_CLK_PCIE0>, + <&sysc MT7621_CLK_PCIE1>, + <&sysc MT7621_CLK_PCIE2>; clock-names = "pcie0", "pcie1", "pcie2"; phys = <&pcie0_phy 1>, <&pcie2_phy 0>; phy-names = "pcie-phy0", "pcie-phy2"; -- 2.25.1 _______________________________________________ devel mailing list devel@linuxdriverproject.org http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
next prev parent reply other threads:[~2021-03-09 5:23 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-03-09 5:22 [PATCH v11 0/6] MIPS: ralink: add CPU clock detection and clock driver for MT7621 Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-03-09 5:22 ` [PATCH v11 1/6] dt-bindings: clock: add dt binding header for mt7621 clocks Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-04-09 18:15 ` Stephen Boyd 2021-04-09 18:15 ` Stephen Boyd 2021-03-09 5:22 ` [PATCH v11 2/6] dt: bindings: add mt7621-sysc device tree binding documentation Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-04-09 18:15 ` Stephen Boyd 2021-04-09 18:15 ` Stephen Boyd 2021-03-09 5:22 ` [PATCH v11 3/6] clk: ralink: add clock driver for mt7621 SoC Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-04-09 18:14 ` Stephen Boyd 2021-04-09 18:14 ` Stephen Boyd 2021-04-09 18:34 ` Sergio Paracuellos 2021-04-09 18:34 ` Sergio Paracuellos 2021-04-09 18:38 ` Stephen Boyd 2021-03-09 5:22 ` Sergio Paracuellos [this message] 2021-03-09 5:22 ` [PATCH v11 4/6] staging: mt7621-dts: make use of new 'mt7621-clk' Sergio Paracuellos 2021-03-09 5:22 ` [PATCH v11 5/6] staging: mt7621-dts: use valid vendor 'mediatek' instead of invalid 'mtk' Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-03-09 15:07 ` Thomas Bogendoerfer 2021-03-09 15:07 ` Thomas Bogendoerfer 2021-03-09 5:22 ` [PATCH v11 6/6] MAINTAINERS: add MT7621 CLOCK maintainer Sergio Paracuellos 2021-03-09 5:22 ` Sergio Paracuellos 2021-03-23 8:13 ` [PATCH v11 0/6] MIPS: ralink: add CPU clock detection and clock driver for MT7621 Sergio Paracuellos 2021-03-23 8:13 ` Sergio Paracuellos 2021-04-09 18:17 ` Stephen Boyd 2021-04-09 18:25 ` Sergio Paracuellos 2021-04-09 18:31 ` Stephen Boyd
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210309052226.29531-5-sergio.paracuellos@gmail.com \ --to=sergio.paracuellos@gmail.com \ --cc=devel@driverdev.osuosl.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=john@phrozen.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@vger.kernel.org \ --cc=neil@brown.name \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=tsbogend@alpha.franken.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.