From: Kieran Bingham <kieran.bingham@ideasonboard.com> To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>, David Airlie <airlied@linux.ie>, Daniel Vetter <daniel@ffwll.ch>, dri-devel@lists.freedesktop.org (open list:DRM DRIVERS FOR RENESAS), linux-renesas-soc@vger.kernel.org (open list:DRM DRIVERS FOR RENESAS), linux-kernel@vger.kernel.org (open list) Subject: [PATCH 2/3] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported Date: Wed, 23 Jun 2021 00:20:23 +0100 [thread overview] Message-ID: <20210622232024.3215248-3-kieran.bingham@ideasonboard.com> (raw) In-Reply-To: <20210622232024.3215248-1-kieran.bingham@ideasonboard.com> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> The R-Car DU as found on the D3, E3, and V3U do not have support for an external synchronisation method. In these cases, the dsysr cached register should not be initialised in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as DSYSR_TVM_MASTER by default. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index ea7e39d03545..cff0d82b9491 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -1243,7 +1243,10 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex, rcrtc->group = rgrp; rcrtc->mmio_offset = mmio_offsets[hwindex]; rcrtc->index = hwindex; - rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES) | DSYSR_TVM_TVSYNC; + rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES); + + if (rcar_du_has(rcdu, RCAR_DU_FEATURE_TVM_SYNC)) + rcrtc->dsysr |= DSYSR_TVM_TVSYNC; if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane; -- 2.30.2
WARNING: multiple messages have this Message-ID (diff)
From: Kieran Bingham <kieran.bingham@ideasonboard.com> To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>, Kieran Bingham <kieran.bingham@ideasonboard.com> Cc: David Airlie <airlied@linux.ie>, open list <linux-kernel@vger.kernel.org>, "open list:DRM DRIVERS FOR RENESAS" <dri-devel@lists.freedesktop.org>, "open list:DRM DRIVERS FOR RENESAS" <linux-renesas-soc@vger.kernel.org>, Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Subject: [PATCH 2/3] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported Date: Wed, 23 Jun 2021 00:20:23 +0100 [thread overview] Message-ID: <20210622232024.3215248-3-kieran.bingham@ideasonboard.com> (raw) In-Reply-To: <20210622232024.3215248-1-kieran.bingham@ideasonboard.com> From: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> The R-Car DU as found on the D3, E3, and V3U do not have support for an external synchronisation method. In these cases, the dsysr cached register should not be initialised in DSYSR_TVM_TVSYNC, but instead should be left clear to configure as DSYSR_TVM_MASTER by default. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- drivers/gpu/drm/rcar-du/rcar_du_crtc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c index ea7e39d03545..cff0d82b9491 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_crtc.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_crtc.c @@ -1243,7 +1243,10 @@ int rcar_du_crtc_create(struct rcar_du_group *rgrp, unsigned int swindex, rcrtc->group = rgrp; rcrtc->mmio_offset = mmio_offsets[hwindex]; rcrtc->index = hwindex; - rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES) | DSYSR_TVM_TVSYNC; + rcrtc->dsysr = (rcrtc->index % 2 ? 0 : DSYSR_DRES); + + if (rcar_du_has(rcdu, RCAR_DU_FEATURE_TVM_SYNC)) + rcrtc->dsysr |= DSYSR_TVM_TVSYNC; if (rcar_du_has(rcdu, RCAR_DU_FEATURE_VSP1_SOURCE)) primary = &rcrtc->vsp->planes[rcrtc->vsp_pipe].plane; -- 2.30.2
next prev parent reply other threads:[~2021-06-22 23:20 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top [not found] <20210622232024.3215248-1-kieran.bingham@ideasonboard.com> 2021-06-22 23:20 ` [PATCH 1/3] drm: rcar-du: Sort the DU outputs Kieran Bingham 2021-06-22 23:20 ` Kieran Bingham 2021-06-23 2:13 ` Laurent Pinchart 2021-06-23 2:13 ` Laurent Pinchart 2021-06-22 23:20 ` Kieran Bingham [this message] 2021-06-22 23:20 ` [PATCH 2/3] drm: rcar-du: Only initialise TVM_TVSYNC mode when supported Kieran Bingham 2021-06-23 2:16 ` Laurent Pinchart 2021-06-23 2:16 ` Laurent Pinchart 2021-06-22 23:20 ` [PATCH 3/3] drm: rcar-du: Add r8a779a0 device support Kieran Bingham 2021-06-22 23:20 ` Kieran Bingham 2021-06-23 2:27 ` Laurent Pinchart 2021-06-23 2:27 ` Laurent Pinchart 2021-06-23 10:50 ` Kieran Bingham 2021-06-23 10:50 ` Kieran Bingham 2021-06-23 5:51 ` kernel test robot 2021-06-23 8:59 ` kernel test robot 2021-06-23 2:09 ` [PATCH 0/3] drm: rcar-du: V3U support Laurent Pinchart 2021-06-23 2:09 ` Laurent Pinchart 2021-06-23 8:28 ` Kieran Bingham 2021-06-23 8:28 ` Kieran Bingham
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210622232024.3215248-3-kieran.bingham@ideasonboard.com \ --to=kieran.bingham@ideasonboard.com \ --cc=airlied@linux.ie \ --cc=daniel@ffwll.ch \ --cc=dri-devel@lists.freedesktop.org \ --cc=kieran.bingham+renesas@ideasonboard.com \ --cc=laurent.pinchart@ideasonboard.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-renesas-soc@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.