From: Caleb Connolly <caleb@connolly.tech>
To: Caleb Connolly <caleb@connolly.tech>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
dri-devel@lists.freedesktop.org
Subject: [PATCH 2/5] dts: arm64: sdm845-oneplus-common: enable debug UART
Date: Tue, 20 Jul 2021 15:33:42 +0000 [thread overview]
Message-ID: <20210720153125.43389-3-caleb@connolly.tech> (raw)
In-Reply-To: <20210720153125.43389-1-caleb@connolly.tech>
A labelled diagram showing the location of the Rx and Tx testpoints for
the OnePlus 6 is available on the postmarketOS wiki:
https://wiki.postmarketos.org/wiki/Serial_debugging:Cable_schematics
The device uses 1.8v UART at a baud rate of 115200, bootloader output is
also available here.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index eb6b1d15293d..e81f5cc9f26d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -19,9 +19,14 @@
/ {
aliases {
+ serial0 = &uart9;
hsuart0 = &uart6;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "Volume keys";
@@ -526,6 +531,11 @@ bluetooth {
};
};
+&uart9 {
+ label = "LS-UART1";
+ status = "okay";
+};
+
&ufs_mem_hc {
status = "okay";
--
2.32.0
WARNING: multiple messages have this Message-ID (diff)
From: Caleb Connolly <caleb@connolly.tech>
To: Caleb Connolly <caleb@connolly.tech>
Cc: devicetree@vger.kernel.org, David Airlie <airlied@linux.ie>,
linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Andy Gross <agross@kernel.org>,
Thierry Reding <thierry.reding@gmail.com>,
dri-devel@lists.freedesktop.org, Sam Ravnborg <sam@ravnborg.org>
Subject: [PATCH 2/5] dts: arm64: sdm845-oneplus-common: enable debug UART
Date: Tue, 20 Jul 2021 15:33:42 +0000 [thread overview]
Message-ID: <20210720153125.43389-3-caleb@connolly.tech> (raw)
In-Reply-To: <20210720153125.43389-1-caleb@connolly.tech>
A labelled diagram showing the location of the Rx and Tx testpoints for
the OnePlus 6 is available on the postmarketOS wiki:
https://wiki.postmarketos.org/wiki/Serial_debugging:Cable_schematics
The device uses 1.8v UART at a baud rate of 115200, bootloader output is
also available here.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index eb6b1d15293d..e81f5cc9f26d 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -19,9 +19,14 @@
/ {
aliases {
+ serial0 = &uart9;
hsuart0 = &uart6;
};
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
gpio-keys {
compatible = "gpio-keys";
label = "Volume keys";
@@ -526,6 +531,11 @@ bluetooth {
};
};
+&uart9 {
+ label = "LS-UART1";
+ status = "okay";
+};
+
&ufs_mem_hc {
status = "okay";
--
2.32.0
next prev parent reply other threads:[~2021-07-20 15:46 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-20 15:33 [PATCH 0/5] OnePlus 6 fixes Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly
2021-07-20 15:33 ` [PATCH 1/5] arm64: dts: qcom: sdm845-oneplus: fix reserved-mem Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly [this message]
2021-07-20 15:33 ` [PATCH 2/5] dts: arm64: sdm845-oneplus-common: enable debug UART Caleb Connolly
2021-07-20 15:33 ` [PATCH 3/5] drm/panel/samsung-sofef00: make gpio optional Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly
2021-07-20 16:03 ` Bjorn Andersson
2021-07-20 16:03 ` Bjorn Andersson
2021-07-20 16:24 ` Caleb Connolly
2021-07-20 16:24 ` Caleb Connolly
2021-07-20 15:33 ` [PATCH 4/5] arm64: dts: qcom: sdm845-oneplus-fajita: remove panel reset gpio Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly
2021-07-20 15:33 ` [PATCH 5/5] arm64: dts: qcom: sdm845-oneplus: add ipa firmware names Caleb Connolly
2021-07-20 15:33 ` Caleb Connolly
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210720153125.43389-3-caleb@connolly.tech \
--to=caleb@connolly.tech \
--cc=agross@kernel.org \
--cc=airlied@linux.ie \
--cc=bjorn.andersson@linaro.org \
--cc=daniel@ffwll.ch \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sam@ravnborg.org \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.