From: Jouni Malinen <jouni@codeaurora.org> To: Kalle Valo <kvalo@codeaurora.org> Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org, Wen Gong <wgong@codeaurora.org>, Jouni Malinen <jouni@codeaurora.org> Subject: [PATCH 3/3] ath11k: set correct NL80211_FEATURE_DYNAMIC_SMPS for WCN6855 Date: Tue, 14 Sep 2021 19:37:26 +0300 [thread overview] Message-ID: <20210914163726.38604-3-jouni@codeaurora.org> (raw) In-Reply-To: <20210914163726.38604-1-jouni@codeaurora.org> From: Wen Gong <wgong@codeaurora.org> Commit "ath11k: support SMPS configuration for 6 GHz" changed "if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS)" to "if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz)" which means NL80211_FEATURE_DYNAMIC_SMPS is enabled for all chips which support 6 GHz. However, WCN6855 supports 6 GHz but it does not support feature NL80211_FEATURE_DYNAMIC_SMPS, and this can lead to MU-MIMO test failures for WCN6855. Disable NL80211_FEATURE_DYNAMIC_SMPS for WCN6855 since its ht_cap does not support WMI_HT_CAP_DYNAMIC_SMPS. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> --- drivers/net/wireless/ath/ath11k/core.c | 1 + drivers/net/wireless/ath/ath11k/hw.h | 1 + drivers/net/wireless/ath/ath11k/mac.c | 3 ++- 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 265ff225bd81..2bae8c5184d4 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -279,6 +279,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .sram_dump = &sram_dump_wcn6855, .max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390, .hal_params = &ath11k_hal_params_qca6390, + .check_dynamic_smps = true, }, }; diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h index c6831fb110ba..7463b96770b7 100644 --- a/drivers/net/wireless/ath/ath11k/hw.h +++ b/drivers/net/wireless/ath/ath11k/hw.h @@ -180,6 +180,7 @@ struct ath11k_hw_params { const struct ath11k_hw_sram_dump *sram_dump; u8 max_tx_ring; const struct hal_param *hal_params; + bool check_dynamic_smps; }; struct ath11k_hw_ops { diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 1f4765e43546..97a2c92b7b9b 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -7570,7 +7570,8 @@ static int __ath11k_mac_register(struct ath11k *ar) * for each band for a dual band capable radio. It will be tricky to * handle it when the ht capability different for each band. */ - if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz) + if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || + (ar->supports_6ghz && !ab->hw_params.check_dynamic_smps)) ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS; ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jouni Malinen <jouni@codeaurora.org> To: Kalle Valo <kvalo@codeaurora.org> Cc: ath11k@lists.infradead.org, linux-wireless@vger.kernel.org, Wen Gong <wgong@codeaurora.org>, Jouni Malinen <jouni@codeaurora.org> Subject: [PATCH 3/3] ath11k: set correct NL80211_FEATURE_DYNAMIC_SMPS for WCN6855 Date: Tue, 14 Sep 2021 19:37:26 +0300 [thread overview] Message-ID: <20210914163726.38604-3-jouni@codeaurora.org> (raw) In-Reply-To: <20210914163726.38604-1-jouni@codeaurora.org> From: Wen Gong <wgong@codeaurora.org> Commit "ath11k: support SMPS configuration for 6 GHz" changed "if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS)" to "if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz)" which means NL80211_FEATURE_DYNAMIC_SMPS is enabled for all chips which support 6 GHz. However, WCN6855 supports 6 GHz but it does not support feature NL80211_FEATURE_DYNAMIC_SMPS, and this can lead to MU-MIMO test failures for WCN6855. Disable NL80211_FEATURE_DYNAMIC_SMPS for WCN6855 since its ht_cap does not support WMI_HT_CAP_DYNAMIC_SMPS. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> --- drivers/net/wireless/ath/ath11k/core.c | 1 + drivers/net/wireless/ath/ath11k/hw.h | 1 + drivers/net/wireless/ath/ath11k/mac.c | 3 ++- 3 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c index 265ff225bd81..2bae8c5184d4 100644 --- a/drivers/net/wireless/ath/ath11k/core.c +++ b/drivers/net/wireless/ath/ath11k/core.c @@ -279,6 +279,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = { .sram_dump = &sram_dump_wcn6855, .max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390, .hal_params = &ath11k_hal_params_qca6390, + .check_dynamic_smps = true, }, }; diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h index c6831fb110ba..7463b96770b7 100644 --- a/drivers/net/wireless/ath/ath11k/hw.h +++ b/drivers/net/wireless/ath/ath11k/hw.h @@ -180,6 +180,7 @@ struct ath11k_hw_params { const struct ath11k_hw_sram_dump *sram_dump; u8 max_tx_ring; const struct hal_param *hal_params; + bool check_dynamic_smps; }; struct ath11k_hw_ops { diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c index 1f4765e43546..97a2c92b7b9b 100644 --- a/drivers/net/wireless/ath/ath11k/mac.c +++ b/drivers/net/wireless/ath/ath11k/mac.c @@ -7570,7 +7570,8 @@ static int __ath11k_mac_register(struct ath11k *ar) * for each band for a dual band capable radio. It will be tricky to * handle it when the ht capability different for each band. */ - if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || ar->supports_6ghz) + if (ht_cap & WMI_HT_CAP_DYNAMIC_SMPS || + (ar->supports_6ghz && !ab->hw_params.check_dynamic_smps)) ar->hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS; ar->hw->wiphy->max_scan_ssids = WLAN_SCAN_PARAMS_MAX_SSID; -- 2.25.1 -- ath11k mailing list ath11k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath11k
next prev parent reply other threads:[~2021-09-14 16:37 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-14 16:37 [PATCH 1/3] ath11k: Change number of TCL rings to one for QCA6390 Jouni Malinen 2021-09-14 16:37 ` Jouni Malinen 2021-09-14 16:37 ` [PATCH 2/3] ath11k: change return buffer manager " Jouni Malinen 2021-09-14 16:37 ` Jouni Malinen 2021-09-16 10:02 ` Kalle Valo 2021-09-16 10:02 ` Kalle Valo 2021-09-28 15:09 ` Kalle Valo 2021-09-28 15:09 ` Kalle Valo 2021-09-28 15:14 ` Kalle Valo 2021-09-28 15:14 ` Kalle Valo 2021-09-29 2:42 ` bqiang 2021-09-29 2:42 ` bqiang 2021-10-01 6:26 ` Kalle Valo 2021-10-01 6:26 ` Kalle Valo 2021-10-05 14:10 ` Kalle Valo 2021-10-05 14:10 ` Kalle Valo 2021-10-25 13:02 ` Kalle Valo 2021-10-25 13:02 ` Kalle Valo 2021-10-25 13:03 ` Kalle Valo 2021-10-25 13:03 ` Kalle Valo 2021-09-14 16:37 ` Jouni Malinen [this message] 2021-09-14 16:37 ` [PATCH 3/3] ath11k: set correct NL80211_FEATURE_DYNAMIC_SMPS for WCN6855 Jouni Malinen 2021-09-16 10:08 ` Kalle Valo 2021-09-16 10:08 ` Kalle Valo 2021-09-16 14:09 ` Wen Gong 2021-09-16 14:09 ` Wen Gong 2021-09-16 15:15 ` Kalle Valo 2021-09-16 15:15 ` Kalle Valo 2021-10-28 10:07 ` Kalle Valo 2021-10-28 10:07 ` Kalle Valo 2021-10-29 2:30 ` Wen Gong 2021-10-29 2:30 ` Wen Gong 2021-11-01 14:13 ` Kalle Valo 2021-11-01 14:13 ` Kalle Valo 2021-09-28 15:12 ` [PATCH 1/3] ath11k: Change number of TCL rings to one for QCA6390 Kalle Valo 2021-09-28 15:12 ` Kalle Valo 2021-09-29 2:15 ` bqiang 2021-09-29 2:15 ` bqiang 2021-10-05 14:06 ` Kalle Valo 2021-10-05 14:06 ` Kalle Valo 2021-10-11 15:12 ` Kalle Valo 2021-10-11 15:12 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210914163726.38604-3-jouni@codeaurora.org \ --to=jouni@codeaurora.org \ --cc=ath11k@lists.infradead.org \ --cc=kvalo@codeaurora.org \ --cc=linux-wireless@vger.kernel.org \ --cc=wgong@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.