From: roucaries.bastien@gmail.com To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Chen-Yu Tsai <wens@kernel.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Salvatore Bonaccorso" <carnil@debian.org>, "Bastien Roucariès" <rouca@debian.org> Subject: [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode Date: Thu, 16 Sep 2021 08:17:21 +0000 [thread overview] Message-ID: <20210916081721.237137-1-rouca@debian.org> (raw) From: Bastien Roucariès <rouca@debian.org> Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès <rouca@debian.org> --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8077f1716fbc..ecb91fb899ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,7 +112,7 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- 2.33.0
WARNING: multiple messages have this Message-ID (diff)
From: roucaries.bastien@gmail.com To: Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>, Chen-Yu Tsai <wens@kernel.org> Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, "Salvatore Bonaccorso" <carnil@debian.org>, "Bastien Roucariès" <rouca@debian.org> Subject: [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode Date: Thu, 16 Sep 2021 08:17:21 +0000 [thread overview] Message-ID: <20210916081721.237137-1-rouca@debian.org> (raw) From: Bastien Roucariès <rouca@debian.org> Commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx delay config") sets the RX/TX delay according to the phy-mode property in the device tree. For the A20-olinuxino-lime2 board this is "rgmii", which is the wrong setting. Following the example of a900cac3750b ("ARM: dts: sun7i: a20: bananapro: Fix ethernet phy-mode") the phy-mode is changed to "rgmii-id" which gets the Ethernet working again on this board. Signed-off-by: Bastien Roucariès <rouca@debian.org> --- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 8077f1716fbc..ecb91fb899ff 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -112,7 +112,7 @@ &gmac { pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; status = "okay"; }; -- 2.33.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-09-16 8:17 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-09-16 8:17 roucaries.bastien [this message] 2021-09-16 8:17 ` [PATCH] [PATCH] ARM: dts: sun7i: A20-olinuxino-lime2: Fix ethernet phy-mode roucaries.bastien 2021-09-16 11:03 ` Maxime Ripard 2021-09-16 11:03 ` Maxime Ripard 2021-09-18 10:48 ` Bastien Roucariès 2021-09-24 7:31 ` (subset) " Maxime Ripard 2021-09-24 7:31 ` Maxime Ripard -- strict thread matches above, loose matches on Subject: below -- 2021-09-15 10:47 roucaries.bastien 2021-09-15 10:47 ` roucaries.bastien 2021-09-15 10:41 Bastien Roucariès 2021-09-15 10:41 ` Bastien Roucariès
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210916081721.237137-1-rouca@debian.org \ --to=roucaries.bastien@gmail.com \ --cc=carnil@debian.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mripard@kernel.org \ --cc=rouca@debian.org \ --cc=wens@csie.org \ --cc=wens@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.