All of lore.kernel.org
 help / color / mirror / Atom feed
From: Zheyu Ma <zheyuma97@gmail.com>
To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz, tiwai@suse.com
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, Zheyu Ma <zheyuma97@gmail.com>
Subject: [PATCH] ASoC: wm8731: Disable the regulator when probing fails
Date: Tue,  5 Apr 2022 20:10:38 +0800	[thread overview]
Message-ID: <20220405121038.4094051-1-zheyuma97@gmail.com> (raw)

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
 sound/soc/codecs/wm8731.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 5d4949c2ec9b..b14c6d104e6d 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
 		dev_err(dev, "Failed to issue reset: %d\n", ret);
-		goto err_regulator_enable;
+		goto err;
 	}
 
 	/* Clear POWEROFF, keep everything else disabled */
@@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 
 	regcache_mark_dirty(wm8731->regmap);
 
-err_regulator_enable:
-	/* Regulators will be enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
 	return ret;
 }
 
@@ -760,21 +757,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		ret = PTR_ERR(wm8731->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
 			ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	ret = wm8731_hw_init(&i2c->dev, wm8731);
 	if (ret != 0)
-		return ret;
+		goto err_regulator_enable;
 
 	ret = devm_snd_soc_register_component(&i2c->dev,
 			&soc_component_dev_wm8731, &wm8731_dai, 1);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	return 0;
+
+err_regulator_enable:
+	/* Regulators will be enabled by bias management */
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+	return ret;
 }
 
 static const struct i2c_device_id wm8731_i2c_id[] = {
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Zheyu Ma <zheyuma97@gmail.com>
To: lgirdwood@gmail.com, broonie@kernel.org, perex@perex.cz, tiwai@suse.com
Cc: patches@opensource.cirrus.com, alsa-devel@alsa-project.org,
	Zheyu Ma <zheyuma97@gmail.com>,
	linux-kernel@vger.kernel.org
Subject: [PATCH] ASoC: wm8731: Disable the regulator when probing fails
Date: Tue,  5 Apr 2022 20:10:38 +0800	[thread overview]
Message-ID: <20220405121038.4094051-1-zheyuma97@gmail.com> (raw)

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130

Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
---
 sound/soc/codecs/wm8731.c | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 5d4949c2ec9b..b14c6d104e6d 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -602,7 +602,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 	ret = wm8731_reset(wm8731->regmap);
 	if (ret < 0) {
 		dev_err(dev, "Failed to issue reset: %d\n", ret);
-		goto err_regulator_enable;
+		goto err;
 	}
 
 	/* Clear POWEROFF, keep everything else disabled */
@@ -619,10 +619,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
 
 	regcache_mark_dirty(wm8731->regmap);
 
-err_regulator_enable:
-	/* Regulators will be enabled by bias management */
-	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
 	return ret;
 }
 
@@ -760,21 +757,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
 		ret = PTR_ERR(wm8731->regmap);
 		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
 			ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	ret = wm8731_hw_init(&i2c->dev, wm8731);
 	if (ret != 0)
-		return ret;
+		goto err_regulator_enable;
 
 	ret = devm_snd_soc_register_component(&i2c->dev,
 			&soc_component_dev_wm8731, &wm8731_dai, 1);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
-		return ret;
+		goto err_regulator_enable;
 	}
 
 	return 0;
+
+err_regulator_enable:
+	/* Regulators will be enabled by bias management */
+	regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+	return ret;
 }
 
 static const struct i2c_device_id wm8731_i2c_id[] = {
-- 
2.25.1


             reply	other threads:[~2022-04-05 12:37 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-05 12:10 Zheyu Ma [this message]
2022-04-05 12:10 ` [PATCH] ASoC: wm8731: Disable the regulator when probing fails Zheyu Ma
2022-04-06 10:01 ` Charles Keepax
2022-04-06 10:01   ` Charles Keepax
2022-04-06 11:25   ` Zheyu Ma
2022-04-06 11:25     ` Zheyu Ma
2022-04-08 11:24 ` Mark Brown
2022-04-08 11:24   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220405121038.4094051-1-zheyuma97@gmail.com \
    --to=zheyuma97@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.cirrus.com \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.