[PATCHv2] myrb: fixup null pointer access on myrb_cleanup()

From: Hannes Reinecke <hare@suse.de>
To: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>,
	James Bottomley <james.bottomley@hansenpartnership.com>,
	linux-scsi@vger.kernel.org, Hannes Reinecke <hare@suse.de>,
	Zheyu Ma <zheyuma97@gmail.com>
Subject: [PATCHv2] myrb: fixup null pointer access on myrb_cleanup()
Date: Mon, 23 May 2022 14:02:44 +0200	[thread overview]
Message-ID: <20220523120244.99515-1-hare@suse.de> (raw)

When myrb_probe() fails the callback might not be set, so we need
to validate the 'disable_intr' callback in myrb_cleanup() to not
cause a null pointer exception. And while at it do not call
myrb_cleanup() if we cannot enable the PCI device at all.

Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Hannes Reinecke <hare@suse.de>
---
 drivers/scsi/myrb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/myrb.c b/drivers/scsi/myrb.c
index 71585528e8db..e885c1dbf61f 100644
--- a/drivers/scsi/myrb.c
+++ b/drivers/scsi/myrb.c
@@ -1239,7 +1239,8 @@ static void myrb_cleanup(struct myrb_hba *cb)
 	myrb_unmap(cb);
 
 	if (cb->mmio_base) {
-		cb->disable_intr(cb->io_base);
+		if (cb->disable_intr)
+			cb->disable_intr(cb->io_base);
 		iounmap(cb->mmio_base);
 	}
 	if (cb->irq)
@@ -3413,9 +3414,13 @@ static struct myrb_hba *myrb_detect(struct pci_dev *pdev,
 	mutex_init(&cb->dcmd_mutex);
 	mutex_init(&cb->dma_mutex);
 	cb->pdev = pdev;
+	cb->host = shost;
 
-	if (pci_enable_device(pdev))
-		goto failure;
+	if (pci_enable_device(pdev)) {
+		dev_err(&pdev->dev, "Failed to enable PCI device\n");
+		scsi_host_put(shost);
+		return NULL;
+	}
 
 	if (privdata->hw_init == DAC960_PD_hw_init ||
 	    privdata->hw_init == DAC960_P_hw_init) {
-- 
2.29.2

