From: Ong Boon Leong <boon.leong.ong@intel.com> To: Alexandre Torgue <alexandre.torgue@foss.st.com>, Jose Abreu <Jose.Abreu@synopsys.com>, Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, Paolo Abeni <pabeni@redhat.com>, "David S . Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Vladimir Oltean <olteanv@gmail.com>, Vivien Didelot <vivien.didelot@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Emilio Riva <emilio.riva@ericsson.com>, Ong Boon Leong <boon.leong.ong@intel.com> Subject: [PATCH net-next v4 0/5] pcs-xpcs, stmmac: add 1000BASE-X AN for network switch Date: Tue, 14 Jun 2022 11:00:25 +0800 [thread overview] Message-ID: <20220614030030.1249850-1-boon.leong.ong@intel.com> (raw) Hi, Thanks for review feedback from Russell in [1] and [2]. I have changed the v4 implementation as follow. v4 changes: 1/5 - Squash v3:1/7 & 2/7 patches into v4:1/6 so that it passes build. 2/5 - [No change] same as v3:3/7 3/5 - [Fix] Fix issues identified by Russell in [1] 4/5 - [Fix] Drop v3:5/7 patch per input by Russell in [2] and make dwmac-intel clear the ovr_an_inband flag if fixed-link is used in ACPI _DSD. 5/5 - [No change] same as v3:7/7 The patches are built with C=1 and W=1 and I have found no additional warn and error from these patches (as advised by Jakub) The record for v3 changes is in [3] 1/7 - [New] Update xpcs_do_config to accept advertising input 2/7 - [New] Fix to compilation issue introduced v1. Update xpcs_do_config for sja1105. 3/7 - Same as 3/4 of v1 series. 4/7 - [Fix] Fix numerous issues identified by Russell King. 5/7 - [New] Make fixed-link setting takes precedence over ovr_an_inband. This is a fix to a bug introduced earlier. Separate patch will be sent later. 6/7 - [New] Allow phy-mode ACPI _DSD setting for dwmac-intel to overwrite the phy_interface detected through PCI DevID. 7/7 - [New] Make mdio register flow to skip PHY scanning if fixed-link is specified. Reference: [1] https://patchwork.kernel.org/comment/24890210/ [2] https://patchwork.kernel.org/comment/24890222/ [3] https://patchwork.kernel.org/project/netdevbpf/cover/20220610033610.114084-1-boon.leong.ong@intel.com/ Thanks Boon Leong Ong Boon Leong (5): net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105 stmmac: intel: prepare to support 1000BASE-X phy interface setting net: pcs: xpcs: add CL37 1000BASE-X AN support stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support net: stmmac: make mdio register skips PHY scanning for fixed-link drivers/net/dsa/sja1105/sja1105_main.c | 2 +- .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 30 ++- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++ drivers/net/pcs/pcs-xpcs.c | 178 +++++++++++++++++- drivers/net/pcs/pcs-xpcs.h | 3 +- include/linux/pcs/pcs-xpcs.h | 3 +- 7 files changed, 228 insertions(+), 13 deletions(-) -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Ong Boon Leong <boon.leong.ong@intel.com> To: Alexandre Torgue <alexandre.torgue@foss.st.com>, Jose Abreu <Jose.Abreu@synopsys.com>, Andrew Lunn <andrew@lunn.ch>, Heiner Kallweit <hkallweit1@gmail.com>, Russell King <linux@armlinux.org.uk>, Paolo Abeni <pabeni@redhat.com>, "David S . Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Vladimir Oltean <olteanv@gmail.com>, Vivien Didelot <vivien.didelot@gmail.com>, Florian Fainelli <f.fainelli@gmail.com>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Emilio Riva <emilio.riva@ericsson.com>, Ong Boon Leong <boon.leong.ong@intel.com> Subject: [PATCH net-next v4 0/5] pcs-xpcs, stmmac: add 1000BASE-X AN for network switch Date: Tue, 14 Jun 2022 11:00:25 +0800 [thread overview] Message-ID: <20220614030030.1249850-1-boon.leong.ong@intel.com> (raw) Hi, Thanks for review feedback from Russell in [1] and [2]. I have changed the v4 implementation as follow. v4 changes: 1/5 - Squash v3:1/7 & 2/7 patches into v4:1/6 so that it passes build. 2/5 - [No change] same as v3:3/7 3/5 - [Fix] Fix issues identified by Russell in [1] 4/5 - [Fix] Drop v3:5/7 patch per input by Russell in [2] and make dwmac-intel clear the ovr_an_inband flag if fixed-link is used in ACPI _DSD. 5/5 - [No change] same as v3:7/7 The patches are built with C=1 and W=1 and I have found no additional warn and error from these patches (as advised by Jakub) The record for v3 changes is in [3] 1/7 - [New] Update xpcs_do_config to accept advertising input 2/7 - [New] Fix to compilation issue introduced v1. Update xpcs_do_config for sja1105. 3/7 - Same as 3/4 of v1 series. 4/7 - [Fix] Fix numerous issues identified by Russell King. 5/7 - [New] Make fixed-link setting takes precedence over ovr_an_inband. This is a fix to a bug introduced earlier. Separate patch will be sent later. 6/7 - [New] Allow phy-mode ACPI _DSD setting for dwmac-intel to overwrite the phy_interface detected through PCI DevID. 7/7 - [New] Make mdio register flow to skip PHY scanning if fixed-link is specified. Reference: [1] https://patchwork.kernel.org/comment/24890210/ [2] https://patchwork.kernel.org/comment/24890222/ [3] https://patchwork.kernel.org/project/netdevbpf/cover/20220610033610.114084-1-boon.leong.ong@intel.com/ Thanks Boon Leong Ong Boon Leong (5): net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105 stmmac: intel: prepare to support 1000BASE-X phy interface setting net: pcs: xpcs: add CL37 1000BASE-X AN support stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support net: stmmac: make mdio register skips PHY scanning for fixed-link drivers/net/dsa/sja1105/sja1105_main.c | 2 +- .../net/ethernet/stmicro/stmmac/dwmac-intel.c | 30 ++- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 11 +- .../net/ethernet/stmicro/stmmac/stmmac_mdio.c | 14 ++ drivers/net/pcs/pcs-xpcs.c | 178 +++++++++++++++++- drivers/net/pcs/pcs-xpcs.h | 3 +- include/linux/pcs/pcs-xpcs.h | 3 +- 7 files changed, 228 insertions(+), 13 deletions(-) -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2022-06-14 3:05 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-06-14 3:00 Ong Boon Leong [this message] 2022-06-14 3:00 ` [PATCH net-next v4 0/5] pcs-xpcs, stmmac: add 1000BASE-X AN for network switch Ong Boon Leong 2022-06-14 3:00 ` [PATCH net-next v4 1/5] net: make xpcs_do_config to accept advertising for pcs-xpcs and sja1105 Ong Boon Leong 2022-06-14 3:00 ` Ong Boon Leong 2022-06-14 3:00 ` [PATCH net-next v4 2/5] stmmac: intel: prepare to support 1000BASE-X phy interface setting Ong Boon Leong 2022-06-14 3:00 ` Ong Boon Leong 2022-06-14 3:00 ` [PATCH net-next v4 3/5] net: pcs: xpcs: add CL37 1000BASE-X AN support Ong Boon Leong 2022-06-14 3:00 ` Ong Boon Leong 2022-06-14 8:47 ` Russell King (Oracle) 2022-06-14 8:47 ` Russell King (Oracle) 2022-06-15 1:06 ` Ong, Boon Leong 2022-06-15 1:06 ` Ong, Boon Leong 2022-06-14 3:00 ` [PATCH net-next v4 4/5] stmmac: intel: add phy-mode and fixed-link ACPI _DSD setting support Ong Boon Leong 2022-06-14 3:00 ` Ong Boon Leong 2022-06-14 18:57 ` Andrew Lunn 2022-06-14 18:57 ` Andrew Lunn 2022-06-14 3:00 ` [PATCH net-next v4 5/5] net: stmmac: make mdio register skips PHY scanning for fixed-link Ong Boon Leong 2022-06-14 3:00 ` Ong Boon Leong 2022-06-14 6:55 ` Ong, Boon Leong 2022-06-14 6:55 ` Ong, Boon Leong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220614030030.1249850-1-boon.leong.ong@intel.com \ --to=boon.leong.ong@intel.com \ --cc=Jose.Abreu@synopsys.com \ --cc=alexandre.torgue@foss.st.com \ --cc=andrew@lunn.ch \ --cc=davem@davemloft.net \ --cc=edumazet@google.com \ --cc=emilio.riva@ericsson.com \ --cc=f.fainelli@gmail.com \ --cc=hkallweit1@gmail.com \ --cc=kuba@kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux@armlinux.org.uk \ --cc=mcoquelin.stm32@gmail.com \ --cc=netdev@vger.kernel.org \ --cc=olteanv@gmail.com \ --cc=pabeni@redhat.com \ --cc=peppe.cavallaro@st.com \ --cc=vivien.didelot@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.