All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Nuno Sá" <nuno.sa@analog.com>
To: linux-kernel@vger.kernel.org,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Dmitry Torokhov" <dmitry.torokhov@gmail.com>,
	devicetree@vger.kernel.org, linux-gpio@vger.kernel.org,
	"Linus Walleij" <linus.walleij@linaro.org>,
	linux-input@vger.kernel.org, "Nuno Sá" <nuno.sa@analog.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Michael Hennerich <michael.hennerich@analog.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH v4 05/10] dt-bindings: input: adp5588: add bindings
Date: Mon, 29 Aug 2022 15:15:48 +0200	[thread overview]
Message-ID: <20220829131553.690063-6-nuno.sa@analog.com> (raw)
In-Reply-To: <20220829131553.690063-1-nuno.sa@analog.com>

Add device tree bindings for the adp5588-keys driver.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/input/adi,adp5588.yaml           | 111 ++++++++++++++++++
 MAINTAINERS                                   |   1 +
 2 files changed, 112 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/adi,adp5588.yaml

diff --git a/Documentation/devicetree/bindings/input/adi,adp5588.yaml b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
new file mode 100644
index 000000000000..26ea66834ae2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/adi,adp5588.yaml
@@ -0,0 +1,111 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/adi,adp5588.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADP5588 Keypad Controller
+
+maintainers:
+  - Nuno Sá <nuno.sa@analog.com>
+
+description: |
+  Analog Devices Mobile I/O Expander and QWERTY Keypad Controller
+  https://www.analog.com/media/en/technical-documentation/data-sheets/ADP5588.pdf
+
+allOf:
+  - $ref: matrix-keymap.yaml#
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,adp5587
+      - adi,adp5588
+
+  reg:
+    maxItems: 1
+
+  vcc-supply:
+    description: Supply Voltage Input
+
+  reset-gpios:
+    description:
+      If specified, it will be asserted during driver probe. As the line is
+      active low, it should be marked GPIO_ACTIVE_LOW.
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#gpio-cells':
+    const: 2
+
+  interrupt-controller:
+    description:
+      This property applies if either keypad,num-rows lower than 8 or
+      keypad,num-columns lower than 10.
+
+  '#interrupt-cells':
+    const: 2
+
+  adi,unlock-keys:
+    description:
+      Specifies a maximum of 2 keys that can be used to unlock the keypad.
+      If this property is set, the keyboard will be locked and only unlocked
+      after these keys are pressed. If only one key is set, a double click is
+      needed to unlock the keypad. The value of this property cannot be bigger
+      or equal than keypad,num-rows * keypad,num-columns.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 2
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - keypad,num-rows
+  - keypad,num-columns
+  - linux,keymap
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/input.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        keys@34 {
+            compatible = "adi,adp5588";
+            reg = <0x34>;
+
+            vcc-supply = <&vcc>;
+            interrupts = <21 IRQ_TYPE_EDGE_FALLING>;
+            interrupt-parent = <&gpio>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+
+            keypad,num-rows = <1>;
+            keypad,num-columns = <9>;
+            linux,keymap = <
+                MATRIX_KEY(0x00, 0x00, KEY_1)
+                MATRIX_KEY(0x00, 0x01, KEY_2)
+                MATRIX_KEY(0x00, 0x02, KEY_3)
+                MATRIX_KEY(0x00, 0x03, KEY_4)
+                MATRIX_KEY(0x00, 0x04, KEY_5)
+                MATRIX_KEY(0x00, 0x05, KEY_6)
+                MATRIX_KEY(0x00, 0x06, KEY_7)
+                MATRIX_KEY(0x00, 0x07, KEY_8)
+                MATRIX_KEY(0x00, 0x08, KEY_9)
+            >;
+        };
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8404c18e6bcf..aa71df8b699b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -556,6 +556,7 @@ M:	Michael Hennerich <michael.hennerich@analog.com>
 S:	Supported
 W:	http://wiki.analog.com/ADP5588
 W:	https://ez.analog.com/linux-software-drivers
+F:	Documentation/devicetree/bindings/input/adi,adp5588.yaml
 F:	drivers/input/keyboard/adp5588-keys.c
 
 ADP8860 BACKLIGHT DRIVER (ADP8860/ADP8861/ADP8863)
-- 
2.37.2


  parent reply	other threads:[~2022-08-29 13:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-29 13:15 [PATCH v4 00/10] adp5588-keys refactor and fw properties support Nuno Sá
2022-08-29 13:15 ` [PATCH v4 01/10] input: keyboard: adp5588-keys: support gpi key events as 'gpio keys' Nuno Sá
2022-08-29 14:18   ` Andy Shevchenko
2022-08-31 12:37   ` Linus Walleij
2022-08-29 13:15 ` [PATCH v4 02/10] gpio: gpio-adp5588: drop the driver Nuno Sá
2022-08-31 12:21   ` Linus Walleij
2022-08-31 12:22     ` Linus Walleij
2022-08-31 12:24       ` Sa, Nuno
2022-08-29 13:15 ` [PATCH v4 03/10] input: keyboard: adp5588-keys: bail out on returned error Nuno Sá
2022-08-29 13:15 ` [PATCH v4 04/10] input: keyboard: adp5588-keys: add support for fw properties Nuno Sá
2022-08-29 13:15 ` Nuno Sá [this message]
2022-08-29 13:15 ` [PATCH v4 06/10] input: keyboard: adp5588-keys: do not check for irq presence Nuno Sá
2022-08-29 13:15 ` [PATCH v4 07/10] input: keyboard: adp5588-keys: fix coding style warnings Nuno Sá
2022-08-29 13:15 ` [PATCH v4 08/10] input: keyboard: adp5588-keys: add optional reset gpio Nuno Sá
2022-08-29 13:15 ` [PATCH v4 09/10] input: keyboard: adp5588-keys: add regulator support Nuno Sá
2022-08-29 13:15 ` [PATCH v4 10/10] input: keyboard: adp5588-keys: Use new PM macros Nuno Sá
2022-08-31  4:19 ` [PATCH v4 00/10] adp5588-keys refactor and fw properties support Dmitry Torokhov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220829131553.690063-6-nuno.sa@analog.com \
    --to=nuno.sa@analog.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=brgl@bgdev.pl \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=krzysztof.kozlowski@linaro.org \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=michael.hennerich@analog.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.