From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv3 00/14] Introduce RK806 Support Date: Fri, 9 Sep 2022 19:55:08 +0200 [thread overview] Message-ID: <20220909175522.179175-1-sebastian.reichel@collabora.com> (raw) Hi, The Rockchip RK3588 Evaluation Boards use SPI connected RK806 PMICs. Downstream this is handled by a new driver, but apart from being SPI connected this chip is quite similar to the ther Rockchip PMICs (also RK806 is promoted to also support I2C). Thus this series instead updates RK808. Changelog since PATCHv2: * https://lore.kernel.org/all/20220908003107.220143-1-sebastian.reichel@collabora.com/ * Change DT binding to not allow nldo-reg6 * Fix DT binding to check for [np]ldo-reg instead of [np]ldo_reg * remove rk806_get_voltage_sel_regmap in favour of regulator_get_voltage_sel_regmap * drop rk806_set_voltage in favour of regulator_set_voltage_sel_regmap * use regulator_set_ramp_delay_regmap * drop possibly incorrect printing of chip id register address in case of errors Changelog since PATCHv1: * https://lore.kernel.org/all/20220831215437.117880-1-sebastian.reichel@collabora.com/ * Collect Acked-by * Avoid if/else checks for regulator id in rk806 regulator driver * Fix indentation in DTS example section of the rk806 binding * Use absolute path for regulator.yaml referencing in the rk806 binding * Reduce pattern for DCDC regulators to only allow 1-10 * replace uppercase name with lowercase ones in regulator names * replace _ with - in regulator names -- Sebastian Sebastian Reichel (14): mfd: rk808: convert to device managed resources mfd: rk808: use dev_err_probe clk: RK808: reduce 'struct rk808' usage regulator: rk808: reduce 'struct rk808' usage rtc: rk808: reduce 'struct rk808' usage mfd: rk808: replace 'struct i2c_client' with 'struct device' mfd: rk808: split into core and i2c dt-bindings: mfd: add rk806 binding mfd: rk8xx: add rk806 support pinctrl: rk805: add rk806 pinctrl support regulator: rk808: Use dev_err_probe regulator: expose regmap_find_closest_bigger regulator: rk808: add rk806 support ASoC: rk817: Remove 'select REGMAP_I2C' .../bindings/mfd/rockchip,rk806.yaml | 388 ++++++++++++++++ drivers/clk/clk-rk808.c | 34 +- drivers/mfd/Kconfig | 19 + drivers/mfd/Makefile | 4 +- drivers/mfd/{rk808.c => rk8xx-core.c} | 343 +++++--------- drivers/mfd/rk8xx-i2c.c | 203 +++++++++ drivers/mfd/rk8xx-spi.c | 128 ++++++ drivers/pinctrl/pinctrl-rk805.c | 189 +++++++- drivers/regulator/helpers.c | 20 +- drivers/regulator/rk808-regulator.c | 410 ++++++++++++++++- drivers/rtc/rtc-rk808.c | 47 +- include/linux/mfd/rk808.h | 417 +++++++++++++++++- include/linux/regulator/driver.h | 2 + sound/soc/codecs/Kconfig | 1 - 14 files changed, 1895 insertions(+), 310 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml rename drivers/mfd/{rk808.c => rk8xx-core.c} (71%) create mode 100644 drivers/mfd/rk8xx-i2c.c create mode 100644 drivers/mfd/rk8xx-spi.c -- 2.35.1
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.com> To: Heiko Stuebner <heiko@sntech.de>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Lee Jones <lee@kernel.org> Cc: Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Linus Walleij <linus.walleij@linaro.org>, Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Alessandro Zummo <a.zummo@towertech.it>, linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.com>, kernel@collabora.com Subject: [PATCHv3 00/14] Introduce RK806 Support Date: Fri, 9 Sep 2022 19:55:08 +0200 [thread overview] Message-ID: <20220909175522.179175-1-sebastian.reichel@collabora.com> (raw) Hi, The Rockchip RK3588 Evaluation Boards use SPI connected RK806 PMICs. Downstream this is handled by a new driver, but apart from being SPI connected this chip is quite similar to the ther Rockchip PMICs (also RK806 is promoted to also support I2C). Thus this series instead updates RK808. Changelog since PATCHv2: * https://lore.kernel.org/all/20220908003107.220143-1-sebastian.reichel@collabora.com/ * Change DT binding to not allow nldo-reg6 * Fix DT binding to check for [np]ldo-reg instead of [np]ldo_reg * remove rk806_get_voltage_sel_regmap in favour of regulator_get_voltage_sel_regmap * drop rk806_set_voltage in favour of regulator_set_voltage_sel_regmap * use regulator_set_ramp_delay_regmap * drop possibly incorrect printing of chip id register address in case of errors Changelog since PATCHv1: * https://lore.kernel.org/all/20220831215437.117880-1-sebastian.reichel@collabora.com/ * Collect Acked-by * Avoid if/else checks for regulator id in rk806 regulator driver * Fix indentation in DTS example section of the rk806 binding * Use absolute path for regulator.yaml referencing in the rk806 binding * Reduce pattern for DCDC regulators to only allow 1-10 * replace uppercase name with lowercase ones in regulator names * replace _ with - in regulator names -- Sebastian Sebastian Reichel (14): mfd: rk808: convert to device managed resources mfd: rk808: use dev_err_probe clk: RK808: reduce 'struct rk808' usage regulator: rk808: reduce 'struct rk808' usage rtc: rk808: reduce 'struct rk808' usage mfd: rk808: replace 'struct i2c_client' with 'struct device' mfd: rk808: split into core and i2c dt-bindings: mfd: add rk806 binding mfd: rk8xx: add rk806 support pinctrl: rk805: add rk806 pinctrl support regulator: rk808: Use dev_err_probe regulator: expose regmap_find_closest_bigger regulator: rk808: add rk806 support ASoC: rk817: Remove 'select REGMAP_I2C' .../bindings/mfd/rockchip,rk806.yaml | 388 ++++++++++++++++ drivers/clk/clk-rk808.c | 34 +- drivers/mfd/Kconfig | 19 + drivers/mfd/Makefile | 4 +- drivers/mfd/{rk808.c => rk8xx-core.c} | 343 +++++--------- drivers/mfd/rk8xx-i2c.c | 203 +++++++++ drivers/mfd/rk8xx-spi.c | 128 ++++++ drivers/pinctrl/pinctrl-rk805.c | 189 +++++++- drivers/regulator/helpers.c | 20 +- drivers/regulator/rk808-regulator.c | 410 ++++++++++++++++- drivers/rtc/rtc-rk808.c | 47 +- include/linux/mfd/rk808.h | 417 +++++++++++++++++- include/linux/regulator/driver.h | 2 + sound/soc/codecs/Kconfig | 1 - 14 files changed, 1895 insertions(+), 310 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml rename drivers/mfd/{rk808.c => rk8xx-core.c} (71%) create mode 100644 drivers/mfd/rk8xx-i2c.c create mode 100644 drivers/mfd/rk8xx-spi.c -- 2.35.1 _______________________________________________ Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip
next reply other threads:[~2022-09-09 17:55 UTC|newest] Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-09-09 17:55 Sebastian Reichel [this message] 2022-09-09 17:55 ` [PATCHv3 00/14] Introduce RK806 Support Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 01/14] mfd: rk808: convert to device managed resources Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-28 13:38 ` Lee Jones 2022-09-28 13:38 ` Lee Jones 2022-09-09 17:55 ` [PATCHv3 02/14] mfd: rk808: use dev_err_probe Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-28 13:51 ` Lee Jones 2022-09-28 13:51 ` Lee Jones 2022-09-09 17:55 ` [PATCHv3 03/14] clk: RK808: reduce 'struct rk808' usage Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 04/14] regulator: rk808: " Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 05/14] rtc: " Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 06/14] mfd: rk808: replace 'struct i2c_client' with 'struct device' Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-28 14:00 ` Lee Jones 2022-09-28 14:00 ` Lee Jones 2022-09-09 17:55 ` [PATCHv3 07/14] mfd: rk808: split into core and i2c Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-28 14:13 ` Lee Jones 2022-09-28 14:13 ` Lee Jones 2022-09-09 17:55 ` [PATCHv3 08/14] dt-bindings: mfd: add rk806 binding Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-10 8:03 ` Krzysztof Kozlowski 2022-09-10 8:03 ` Krzysztof Kozlowski 2022-09-09 17:55 ` [PATCHv3 09/14] mfd: rk8xx: add rk806 support Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-28 14:35 ` Lee Jones 2022-09-28 14:35 ` Lee Jones 2022-09-09 17:55 ` [PATCHv3 10/14] pinctrl: rk805: add rk806 pinctrl support Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 11/14] regulator: rk808: Use dev_err_probe Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-09 17:55 ` [PATCHv3 12/14] regulator: expose regmap_find_closest_bigger Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-10 17:17 ` Matti Vaittinen 2022-09-10 17:17 ` Matti Vaittinen 2022-09-19 14:15 ` Sebastian Reichel 2022-09-19 14:15 ` Sebastian Reichel 2022-09-28 17:37 ` Mark Brown 2022-09-28 17:37 ` Mark Brown 2022-09-09 17:55 ` [PATCHv3 13/14] regulator: rk808: add rk806 support Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-09-10 17:03 ` Matti Vaittinen 2022-09-10 17:03 ` Matti Vaittinen 2022-09-09 17:55 ` [PATCHv3 14/14] ASoC: rk817: Remove 'select REGMAP_I2C' Sebastian Reichel 2022-09-09 17:55 ` Sebastian Reichel 2022-11-28 19:05 ` (subset) [PATCHv3 00/14] Introduce RK806 Support Mark Brown 2022-11-28 19:05 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20220909175522.179175-1-sebastian.reichel@collabora.com \ --to=sebastian.reichel@collabora.com \ --cc=a.zummo@towertech.it \ --cc=alexandre.belloni@bootlin.com \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=heiko@sntech.de \ --cc=kernel@collabora.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lee@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linus.walleij@linaro.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mturquette@baylibre.com \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.