From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Helge Deller <deller@gmx.de>
Cc: linux-kernel@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
Simtec Linux Team <linux@simtec.co.uk>,
Arnd Bergmann <arnd@arndb.de>,
Alim Akhtar <alim.akhtar@samsung.com>,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH 16/21] fbdev: remove s3c2410 framebuffer
Date: Fri, 21 Oct 2022 22:27:49 +0200 [thread overview]
Message-ID: <20221021203329.4143397-16-arnd@kernel.org> (raw)
In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/video/fbdev/Kconfig | 33 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 ---
drivers/video/fbdev/s3c2410fb.c | 1142 ----------------------
drivers/video/fbdev/s3c2410fb.h | 48 -
include/linux/platform_data/fb-s3c2410.h | 99 --
6 files changed, 4 insertions(+), 1462 deletions(-)
delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h
delete mode 100644 drivers/video/fbdev/s3c2410fb.c
delete mode 100644 drivers/video/fbdev/s3c2410fb.h
delete mode 100644 include/linux/platform_data/fb-s3c2410.h
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index d1d74269075a..fa5bdbf82d59 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
+ SoC line such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
+ actual capabilities depending on the chip. The S3C6400
+ and S3C6410 support 4 hardware windows.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
help
Show all register writes via pr_debug()
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.rst>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 279cb0066aec..e6b0ae094b8b 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
deleted file mode 100644
index 1e46f7a788e5..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
deleted file mode 100644
index d8ae5258de46..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
deleted file mode 100644
index cdd11e2f8859..000000000000
diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
deleted file mode 100644
index 10c11e6316d6..000000000000
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org, linux-samsung-soc@vger.kernel.org,
Ben Dooks <ben-linux@fluff.org>, Arnd Bergmann <arnd@arndb.de>,
linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org,
Alim Akhtar <alim.akhtar@samsung.com>,
Simtec Linux Team <linux@simtec.co.uk>
Subject: [PATCH 16/21] fbdev: remove s3c2410 framebuffer
Date: Fri, 21 Oct 2022 22:27:49 +0200 [thread overview]
Message-ID: <20221021203329.4143397-16-arnd@kernel.org> (raw)
In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/video/fbdev/Kconfig | 33 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 ---
drivers/video/fbdev/s3c2410fb.c | 1142 ----------------------
drivers/video/fbdev/s3c2410fb.h | 48 -
include/linux/platform_data/fb-s3c2410.h | 99 --
6 files changed, 4 insertions(+), 1462 deletions(-)
delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h
delete mode 100644 drivers/video/fbdev/s3c2410fb.c
delete mode 100644 drivers/video/fbdev/s3c2410fb.h
delete mode 100644 include/linux/platform_data/fb-s3c2410.h
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index d1d74269075a..fa5bdbf82d59 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
+ SoC line such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
+ actual capabilities depending on the chip. The S3C6400
+ and S3C6410 support 4 hardware windows.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
help
Show all register writes via pr_debug()
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.rst>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 279cb0066aec..e6b0ae094b8b 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
deleted file mode 100644
index 1e46f7a788e5..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
deleted file mode 100644
index d8ae5258de46..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
deleted file mode 100644
index cdd11e2f8859..000000000000
diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
deleted file mode 100644
index 10c11e6316d6..000000000000
--
2.29.2
WARNING: multiple messages have this Message-ID (diff)
From: Arnd Bergmann <arnd@kernel.org>
To: linux-arm-kernel@lists.infradead.org,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Helge Deller <deller@gmx.de>
Cc: linux-kernel@vger.kernel.org, Ben Dooks <ben-linux@fluff.org>,
Simtec Linux Team <linux@simtec.co.uk>,
Arnd Bergmann <arnd@arndb.de>,
Alim Akhtar <alim.akhtar@samsung.com>,
linux-fbdev@vger.kernel.org, dri-devel@lists.freedesktop.org,
linux-samsung-soc@vger.kernel.org
Subject: [PATCH 16/21] fbdev: remove s3c2410 framebuffer
Date: Fri, 21 Oct 2022 22:27:49 +0200 [thread overview]
Message-ID: <20221021203329.4143397-16-arnd@kernel.org> (raw)
In-Reply-To: <20221021202254.4142411-1-arnd@kernel.org>
From: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/video/fbdev/Kconfig | 33 +-
drivers/video/fbdev/Makefile | 1 -
drivers/video/fbdev/s3c2410fb-regs-lcd.h | 143 ---
drivers/video/fbdev/s3c2410fb.c | 1142 ----------------------
drivers/video/fbdev/s3c2410fb.h | 48 -
include/linux/platform_data/fb-s3c2410.h | 99 --
6 files changed, 4 insertions(+), 1462 deletions(-)
delete mode 100644 drivers/video/fbdev/s3c2410fb-regs-lcd.h
delete mode 100644 drivers/video/fbdev/s3c2410fb.c
delete mode 100644 drivers/video/fbdev/s3c2410fb.h
delete mode 100644 include/linux/platform_data/fb-s3c2410.h
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index d1d74269075a..fa5bdbf82d59 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -1822,19 +1822,17 @@ config FB_SH_MOBILE_LCDC
config FB_S3C
tristate "Samsung S3C framebuffer support"
depends on FB && HAVE_CLK && HAS_IOMEM
- depends on (CPU_S3C2416 || ARCH_S3C64XX) || COMPILE_TEST
+ depends on ARCH_S3C64XX || COMPILE_TEST
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
help
Frame buffer driver for the built-in FB controller in the Samsung
- SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
- and the S3C64XX series such as the S3C6400 and S3C6410.
+ SoC line such as the S3C6400 and S3C6410.
These chips all have the same basic framebuffer design with the
- actual capabilities depending on the chip. For instance the S3C6400
- and S3C6410 support 4 hardware windows whereas the S3C24XX series
- currently only have two.
+ actual capabilities depending on the chip. The S3C6400
+ and S3C6410 support 4 hardware windows.
Currently the support is only for the S3C6400 and S3C6410 SoCs.
@@ -1844,29 +1842,6 @@ config FB_S3C_DEBUG_REGWRITE
help
Show all register writes via pr_debug()
-config FB_S3C2410
- tristate "S3C2410 LCD framebuffer support"
- depends on FB && ARCH_S3C24XX
- select FB_CFB_FILLRECT
- select FB_CFB_COPYAREA
- select FB_CFB_IMAGEBLIT
- help
- Frame buffer driver for the built-in LCD controller in the Samsung
- S3C2410 processor.
-
- This driver is also available as a module ( = code which can be
- inserted and removed from the running kernel whenever you want). The
- module will be called s3c2410fb. If you want to compile it as a module,
- say M here and read <file:Documentation/kbuild/modules.rst>.
-
- If unsure, say N.
-config FB_S3C2410_DEBUG
- bool "S3C2410 lcd debug messages"
- depends on FB_S3C2410
- help
- Turn on debugging messages. Note that you can set/unset at run time
- through sysfs
-
config FB_SM501
tristate "Silicon Motion SM501 framebuffer support"
depends on FB && MFD_SM501
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 279cb0066aec..e6b0ae094b8b 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -98,7 +98,6 @@ obj-$(CONFIG_FB_S1D13XXX) += s1d13xxxfb.o
obj-$(CONFIG_FB_SH7760) += sh7760fb.o
obj-$(CONFIG_FB_IMX) += imxfb.o
obj-$(CONFIG_FB_S3C) += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410) += s3c2410fb.o
obj-$(CONFIG_FB_FSL_DIU) += fsl-diu-fb.o
obj-$(CONFIG_FB_COBALT) += cobalt_lcdfb.o
obj-$(CONFIG_FB_IBM_GXT4500) += gxt4500.o
diff --git a/drivers/video/fbdev/s3c2410fb-regs-lcd.h b/drivers/video/fbdev/s3c2410fb-regs-lcd.h
deleted file mode 100644
index 1e46f7a788e5..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
deleted file mode 100644
index d8ae5258de46..000000000000
diff --git a/drivers/video/fbdev/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
deleted file mode 100644
index cdd11e2f8859..000000000000
diff --git a/include/linux/platform_data/fb-s3c2410.h b/include/linux/platform_data/fb-s3c2410.h
deleted file mode 100644
index 10c11e6316d6..000000000000
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-10-21 20:51 UTC|newest]
Thread overview: 196+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-21 20:22 [PATCH 00/21] ARM: s3c: clean out obsolete platforms Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:22 ` Arnd Bergmann
2022-10-21 20:27 ` [PATCH 01/21] ARM: s3c: remove all s3c24xx support Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 20:56 ` Heiko Stübner
2022-10-22 20:56 ` Heiko Stübner
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 14:27 ` Arnd Bergmann
2022-10-24 15:45 ` Heiko Stübner
2022-10-24 15:45 ` Heiko Stübner
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-24 12:25 ` Krzysztof Kozlowski
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 02/21] ARM: s3c: remove s3c24xx specific hacks Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 22:33 ` Wolfram Sang
2022-10-21 22:33 ` Wolfram Sang
2022-10-21 22:33 ` Wolfram Sang
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 11:24 ` Greg Kroah-Hartman
2022-10-22 14:02 ` Linus Walleij
2022-10-22 14:02 ` Linus Walleij
2022-10-22 14:02 ` Linus Walleij
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 11:00 ` Jonathan Cameron
2022-10-23 18:08 ` Daniel Lezcano
2022-10-23 18:08 ` Daniel Lezcano
2022-10-23 18:08 ` Daniel Lezcano
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 7:55 ` Miquel Raynal
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 16:53 ` Ulf Hansson
2022-10-24 16:53 ` Ulf Hansson
2022-10-24 16:53 ` Ulf Hansson
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-27 23:10 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 03/21] ARM: s3c: remove most s3c64xx board support Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-24 12:26 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 04/21] ARM: s3c: remove adc.c Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:37 ` Mark Brown
2022-10-24 11:37 ` Mark Brown
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-24 12:27 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 05/21] ARM: s3c: simplify platform code Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:41 ` Mark Brown
2022-10-24 11:41 ` Mark Brown
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 12:29 ` Krzysztof Kozlowski
2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 13:32 ` Arnd Bergmann
2022-10-24 14:13 ` Krzysztof Kozlowski
2022-10-24 14:13 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 06/21] ARM: s3c: remove s3c6400 support Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-24 12:30 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 07/21] power: remove s3c adc battery driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 7:28 ` Lee Jones
2022-10-24 7:28 ` Lee Jones
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:42 ` Arnd Bergmann
2022-10-24 7:57 ` Lee Jones
2022-10-24 7:57 ` Lee Jones
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-28 14:18 ` Sebastian Reichel
2022-10-28 14:18 ` Sebastian Reichel
2022-10-21 20:27 ` [PATCH 08/21] hwmon: remove s3c driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 4:02 ` Guenter Roeck
2022-10-22 4:02 ` Guenter Roeck
2022-10-22 8:36 ` Arnd Bergmann
2022-10-22 8:36 ` Arnd Bergmann
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-24 12:31 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 09/21] pata: remove samsung_cf driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 14:35 ` Sergey Shtylyov
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:41 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-23 22:43 ` Damien Le Moal
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 14:24 ` Arnd Bergmann
2022-10-24 12:34 ` Krzysztof Kozlowski
2022-10-24 12:34 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 10/21] mmc: remove s3cmci driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 12:35 ` Krzysztof Kozlowski
2022-10-24 16:52 ` Ulf Hansson
2022-10-24 16:52 ` Ulf Hansson
2022-10-21 20:27 ` [PATCH 11/21] clk: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 11:50 ` Chanwoo Choi
2022-10-22 11:50 ` Chanwoo Choi
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-27 23:11 ` Stephen Boyd
2022-10-27 23:11 ` Stephen Boyd
2022-10-21 20:27 ` [PATCH 12/21] leds: " Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-22 10:04 ` Pavel Machek
2022-10-22 10:04 ` Pavel Machek
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-24 12:37 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 13/21] usb: gadget: remove s3c24xx drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-24 12:39 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 14/21] dmaengine: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-11-04 14:14 ` Vinod Koul
2022-11-04 14:14 ` Vinod Koul
2022-11-18 21:54 ` [PATCH] ARM: s3c: Fix a build error after the s3c24xx dma driver was removed Uwe Kleine-König
2022-11-20 10:31 ` Krzysztof Kozlowski
2022-11-20 11:22 ` Krzysztof Kozlowski
2022-11-25 8:51 ` Uwe Kleine-König
2022-11-25 8:52 ` Krzysztof Kozlowski
2022-12-02 11:20 ` Regression in dmaengine/next " Uwe Kleine-König
2022-12-02 11:42 ` Vinod Koul
2022-12-05 8:56 ` Uwe Kleine-König
2022-10-21 20:27 ` [PATCH 15/21] cpufreq: remove s3c24xx drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-24 12:40 ` Krzysztof Kozlowski
2022-10-25 5:19 ` Viresh Kumar
2022-10-25 5:19 ` Viresh Kumar
2022-10-21 20:27 ` Arnd Bergmann [this message]
2022-10-21 20:27 ` [PATCH 16/21] fbdev: remove s3c2410 framebuffer Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-24 12:49 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 17/21] input: remove s3c24xx touchscreen driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 11:57 ` Dmitry Torokhov
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 12:50 ` Krzysztof Kozlowski
2022-10-24 13:02 ` Arnd Bergmann
2022-10-24 13:02 ` Arnd Bergmann
2022-10-21 20:27 ` [PATCH 18/21] pinctrl: remove s3c24xx driver Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 21:25 ` Linus Walleij
2022-10-21 21:25 ` Linus Walleij
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-24 12:51 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 19/21] spi: " Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 20/21] soc: s3c: remove pm-debug hack Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-24 12:52 ` Krzysztof Kozlowski
2022-10-21 20:27 ` [PATCH 21/21] ASoC: samsung: remove unused drivers Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-21 20:27 ` Arnd Bergmann
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-24 12:53 ` Krzysztof Kozlowski
2022-10-22 15:18 ` [PATCH 00/21] ARM: s3c: clean out obsolete platforms Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 15:18 ` Krzysztof Kozlowski
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-22 19:48 ` Arnd Bergmann
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:00 ` Rob Herring
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
2022-10-24 13:18 ` Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221021203329.4143397-16-arnd@kernel.org \
--to=arnd@kernel.org \
--cc=alim.akhtar@samsung.com \
--cc=arnd@arndb.de \
--cc=ben-linux@fluff.org \
--cc=deller@gmx.de \
--cc=dri-devel@lists.freedesktop.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux@simtec.co.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.