All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Andrzej Hajda <andrzej.hajda@intel.com>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Robert Foss <robert.foss@linaro.org>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>,
	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Subject: [PATCH v4 7/7] drm: rcar-du: dsi: Add r8A779g0 support
Date: Wed, 30 Nov 2022 10:08:10 +0200	[thread overview]
Message-ID: <20221130080810.517470-1-tomi.valkeinen+renesas@ideasonboard.com> (raw)
In-Reply-To: <20221129134138.375411-1-tomi.valkeinen+renesas@ideasonboard.com>

Add DSI support for r8a779g0. The main differences to r8a779a0 are in
the PLL and PHTW setups.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---

Changes to v3:
- Use v3h as the default case in "switch(model)" tests
- Add Laurent's rb

 drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c      | 497 ++++++++++++++-----
 drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h |   6 +-
 2 files changed, 375 insertions(+), 128 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
index a7f2b7f66a17..e10e4d4b89a2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -28,6 +29,31 @@
 #include "rcar_mipi_dsi.h"
 #include "rcar_mipi_dsi_regs.h"
 
+#define MHZ(v) ((u32)((v) * 1000000U))
+
+enum rcar_mipi_dsi_hw_model {
+	RCAR_DSI_V3U,
+	RCAR_DSI_V4H,
+};
+
+struct rcar_mipi_dsi_device_info {
+	enum rcar_mipi_dsi_hw_model model;
+
+	const struct dsi_clk_config *clk_cfg;
+
+	u8 clockset2_m_offset;
+
+	u8 n_min;
+	u8 n_max;
+	u8 n_mul;
+	unsigned long fpfd_min;
+	unsigned long fpfd_max;
+	u16 m_min;
+	u16 m_max;
+	unsigned long fout_min;
+	unsigned long fout_max;
+};
+
 struct rcar_mipi_dsi {
 	struct device *dev;
 	const struct rcar_mipi_dsi_device_info *info;
@@ -50,6 +76,17 @@ struct rcar_mipi_dsi {
 	unsigned int lanes;
 };
 
+struct dsi_setup_info {
+	unsigned long hsfreq;
+	u16 hsfreqrange;
+
+	unsigned long fout;
+	u16 m;
+	u16 n;
+	u16 vclk_divider;
+	const struct dsi_clk_config *clkset;
+};
+
 static inline struct rcar_mipi_dsi *
 bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge)
 {
@@ -62,65 +99,78 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host)
 	return container_of(host, struct rcar_mipi_dsi, host);
 }
 
-static const u32 phtw[] = {
-	0x01020114, 0x01600115, /* General testing */
-	0x01030116, 0x0102011d, /* General testing */
-	0x011101a4, 0x018601a4, /* 1Gbps testing */
-	0x014201a0, 0x010001a3, /* 1Gbps testing */
-	0x0101011f,		/* 1Gbps testing */
-};
-
-static const u32 phtw2[] = {
-	0x010c0130, 0x010c0140, /* General testing */
-	0x010c0150, 0x010c0180, /* General testing */
-	0x010c0190,
-	0x010a0160, 0x010a0170,
-	0x01800164, 0x01800174,	/* 1Gbps testing */
-};
-
 static const u32 hsfreqrange_table[][2] = {
-	{ 80000000U,   0x00 }, { 90000000U,   0x10 }, { 100000000U,  0x20 },
-	{ 110000000U,  0x30 }, { 120000000U,  0x01 }, { 130000000U,  0x11 },
-	{ 140000000U,  0x21 }, { 150000000U,  0x31 }, { 160000000U,  0x02 },
-	{ 170000000U,  0x12 }, { 180000000U,  0x22 }, { 190000000U,  0x32 },
-	{ 205000000U,  0x03 }, { 220000000U,  0x13 }, { 235000000U,  0x23 },
-	{ 250000000U,  0x33 }, { 275000000U,  0x04 }, { 300000000U,  0x14 },
-	{ 325000000U,  0x25 }, { 350000000U,  0x35 }, { 400000000U,  0x05 },
-	{ 450000000U,  0x16 }, { 500000000U,  0x26 }, { 550000000U,  0x37 },
-	{ 600000000U,  0x07 }, { 650000000U,  0x18 }, { 700000000U,  0x28 },
-	{ 750000000U,  0x39 }, { 800000000U,  0x09 }, { 850000000U,  0x19 },
-	{ 900000000U,  0x29 }, { 950000000U,  0x3a }, { 1000000000U, 0x0a },
-	{ 1050000000U, 0x1a }, { 1100000000U, 0x2a }, { 1150000000U, 0x3b },
-	{ 1200000000U, 0x0b }, { 1250000000U, 0x1b }, { 1300000000U, 0x2b },
-	{ 1350000000U, 0x3c }, { 1400000000U, 0x0c }, { 1450000000U, 0x1c },
-	{ 1500000000U, 0x2c }, { 1550000000U, 0x3d }, { 1600000000U, 0x0d },
-	{ 1650000000U, 0x1d }, { 1700000000U, 0x2e }, { 1750000000U, 0x3e },
-	{ 1800000000U, 0x0e }, { 1850000000U, 0x1e }, { 1900000000U, 0x2f },
-	{ 1950000000U, 0x3f }, { 2000000000U, 0x0f }, { 2050000000U, 0x40 },
-	{ 2100000000U, 0x41 }, { 2150000000U, 0x42 }, { 2200000000U, 0x43 },
-	{ 2250000000U, 0x44 }, { 2300000000U, 0x45 }, { 2350000000U, 0x46 },
-	{ 2400000000U, 0x47 }, { 2450000000U, 0x48 }, { 2500000000U, 0x49 },
+	{   MHZ(80), 0x00 }, {   MHZ(90), 0x10 }, {  MHZ(100), 0x20 },
+	{  MHZ(110), 0x30 }, {  MHZ(120), 0x01 }, {  MHZ(130), 0x11 },
+	{  MHZ(140), 0x21 }, {  MHZ(150), 0x31 }, {  MHZ(160), 0x02 },
+	{  MHZ(170), 0x12 }, {  MHZ(180), 0x22 }, {  MHZ(190), 0x32 },
+	{  MHZ(205), 0x03 }, {  MHZ(220), 0x13 }, {  MHZ(235), 0x23 },
+	{  MHZ(250), 0x33 }, {  MHZ(275), 0x04 }, {  MHZ(300), 0x14 },
+	{  MHZ(325), 0x25 }, {  MHZ(350), 0x35 }, {  MHZ(400), 0x05 },
+	{  MHZ(450), 0x16 }, {  MHZ(500), 0x26 }, {  MHZ(550), 0x37 },
+	{  MHZ(600), 0x07 }, {  MHZ(650), 0x18 }, {  MHZ(700), 0x28 },
+	{  MHZ(750), 0x39 }, {  MHZ(800), 0x09 }, {  MHZ(850), 0x19 },
+	{  MHZ(900), 0x29 }, {  MHZ(950), 0x3a }, { MHZ(1000), 0x0a },
+	{ MHZ(1050), 0x1a }, { MHZ(1100), 0x2a }, { MHZ(1150), 0x3b },
+	{ MHZ(1200), 0x0b }, { MHZ(1250), 0x1b }, { MHZ(1300), 0x2b },
+	{ MHZ(1350), 0x3c }, { MHZ(1400), 0x0c }, { MHZ(1450), 0x1c },
+	{ MHZ(1500), 0x2c }, { MHZ(1550), 0x3d }, { MHZ(1600), 0x0d },
+	{ MHZ(1650), 0x1d }, { MHZ(1700), 0x2e }, { MHZ(1750), 0x3e },
+	{ MHZ(1800), 0x0e }, { MHZ(1850), 0x1e }, { MHZ(1900), 0x2f },
+	{ MHZ(1950), 0x3f }, { MHZ(2000), 0x0f }, { MHZ(2050), 0x40 },
+	{ MHZ(2100), 0x41 }, { MHZ(2150), 0x42 }, { MHZ(2200), 0x43 },
+	{ MHZ(2250), 0x44 }, { MHZ(2300), 0x45 }, { MHZ(2350), 0x46 },
+	{ MHZ(2400), 0x47 }, { MHZ(2450), 0x48 }, { MHZ(2500), 0x49 },
 	{ /* sentinel */ },
 };
 
-struct vco_cntrl_value {
+struct dsi_clk_config {
 	u32 min_freq;
 	u32 max_freq;
-	u16 value;
+	u8 vco_cntrl;
+	u8 cpbias_cntrl;
+	u8 gmp_cntrl;
+	u8 int_cntrl;
+	u8 prop_cntrl;
 };
 
-static const struct vco_cntrl_value vco_cntrl_table[] = {
-	{ .min_freq = 40000000U,   .max_freq = 55000000U,   .value = 0x3f },
-	{ .min_freq = 52500000U,   .max_freq = 80000000U,   .value = 0x39 },
-	{ .min_freq = 80000000U,   .max_freq = 110000000U,  .value = 0x2f },
-	{ .min_freq = 105000000U,  .max_freq = 160000000U,  .value = 0x29 },
-	{ .min_freq = 160000000U,  .max_freq = 220000000U,  .value = 0x1f },
-	{ .min_freq = 210000000U,  .max_freq = 320000000U,  .value = 0x19 },
-	{ .min_freq = 320000000U,  .max_freq = 440000000U,  .value = 0x0f },
-	{ .min_freq = 420000000U,  .max_freq = 660000000U,  .value = 0x09 },
-	{ .min_freq = 630000000U,  .max_freq = 1149000000U, .value = 0x03 },
-	{ .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 },
-	{ .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 },
+static const struct dsi_clk_config dsi_clk_cfg_v3u[] = {
+	{   MHZ(40),    MHZ(55), 0x3f, 0x10, 0x01, 0x00, 0x0b },
+	{   MHZ(52.5),  MHZ(80), 0x39, 0x10, 0x01, 0x00, 0x0b },
+	{   MHZ(80),   MHZ(110), 0x2f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(105),   MHZ(160), 0x29, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(160),   MHZ(220), 0x1f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(210),   MHZ(320), 0x19, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(320),   MHZ(440), 0x0f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(420),   MHZ(660), 0x09, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(630),  MHZ(1149), 0x03, 0x10, 0x01, 0x00, 0x0b },
+	{ MHZ(1100),  MHZ(1152), 0x01, 0x10, 0x01, 0x00, 0x0b },
+	{ MHZ(1150),  MHZ(1250), 0x01, 0x10, 0x01, 0x00, 0x0c },
+	{ /* sentinel */ },
+};
+
+static const struct dsi_clk_config dsi_clk_cfg_v4h[] = {
+	{   MHZ(40),    MHZ(45.31),  0x2b, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(45.31), MHZ(54.66),  0x28, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(54.66), MHZ(62.5),   0x28, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(62.5),  MHZ(75),     0x27, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(75),    MHZ(90.63),  0x23, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(90.63), MHZ(109.37), 0x20, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(109.37), MHZ(125),    0x20, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(125),    MHZ(150),    0x1f, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(150),    MHZ(181.25), 0x1b, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(181.25), MHZ(218.75), 0x18, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(218.75), MHZ(250),    0x18, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(250),    MHZ(300),    0x17, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(300),    MHZ(362.5),  0x13, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(362.5),  MHZ(455.48), 0x10, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(455.48), MHZ(500),    0x10, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(500),    MHZ(600),    0x0f, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(600),    MHZ(725),    0x0b, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(725),    MHZ(875),    0x08, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(875),   MHZ(1000),    0x08, 0x00, 0x00, 0x08, 0x0a },
+	{ MHZ(1000),   MHZ(1200),    0x07, 0x00, 0x00, 0x08, 0x0a },
+	{ MHZ(1200),   MHZ(1250),    0x03, 0x00, 0x00, 0x08, 0x0a },
 	{ /* sentinel */ },
 };
 
@@ -144,7 +194,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set)
 	rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set);
 }
 
-static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
+static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw)
 {
 	u32 status;
 	int ret;
@@ -163,32 +213,181 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
 	return ret;
 }
 
+static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi,
+					const u32 *phtw, unsigned int size)
+{
+	for (unsigned int i = 0; i < size; i++) {
+		int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+#define WRITE_PHTW(...)                                               \
+	({                                                            \
+		static const u32 phtw[] = { __VA_ARGS__ };            \
+		int ret;                                              \
+		ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw,         \
+						   ARRAY_SIZE(phtw)); \
+		ret;                                                  \
+	})
+
+static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
+{
+	return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d,
+			  0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3,
+			  0x0101011f);
+}
+
+static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
+{
+	return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180,
+			  0x010c0190, 0x010a0160, 0x010a0170, 0x01800164,
+			  0x01800174);
+}
+
+static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
+				       const struct dsi_setup_info *setup_info)
+{
+	int ret;
+
+	if (setup_info->hsfreq < MHZ(450)) {
+		ret = WRITE_PHTW(0x01010100, 0x011b01ac);
+		if (ret)
+			return ret;
+	}
+
+	ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175,
+			 0x01030176, 0x01040166, 0x010201ad);
+	if (ret)
+		return ret;
+
+	if (setup_info->hsfreq <= MHZ(1000))
+		ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171,
+				 0x01110172);
+	else if (setup_info->hsfreq <= MHZ(1500))
+		ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171,
+				 0x01100172);
+	else if (setup_info->hsfreq <= MHZ(2500))
+		ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172);
+	else
+		return -EINVAL;
+
+	if (ret)
+		return ret;
+
+	if (dsi->lanes <= 1) {
+		ret = WRITE_PHTW(0x01070100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (dsi->lanes <= 2) {
+		ret = WRITE_PHTW(0x01090100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (dsi->lanes <= 3) {
+		ret = WRITE_PHTW(0x010b0100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (setup_info->hsfreq <= MHZ(1500)) {
+		ret = WRITE_PHTW(0x01010100, 0x01c0016e);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
+				 const struct dsi_setup_info *setup_info)
+{
+	u32 status;
+	int ret;
+
+	if (setup_info->hsfreq <= MHZ(1500)) {
+		WRITE_PHTW(0x01020100, 0x00000180);
+
+		ret = read_poll_timeout(rcar_mipi_dsi_read, status,
+					status & PHTR_TEST, 2000, 10000, false,
+					dsi, PHTR);
+		if (ret < 0) {
+			dev_err(dsi->dev, "failed to test PHTR\n");
+			return ret;
+		}
+
+		WRITE_PHTW(0x01010100, 0x0100016e);
+	}
+
+	return 0;
+}
+
 /* -----------------------------------------------------------------------------
  * Hardware Setup
  */
 
-struct dsi_setup_info {
-	unsigned long fout;
-	u16 vco_cntrl;
-	u16 prop_cntrl;
-	u16 hsfreqrange;
-	u16 div;
-	unsigned int m;
-	unsigned int n;
-};
+static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
+				   unsigned long fin_rate,
+				   unsigned long fout_target,
+				   struct dsi_setup_info *setup_info)
+{
+	unsigned int best_err = -1;
+	const struct rcar_mipi_dsi_device_info *info = dsi->info;
+
+	for (unsigned int n = info->n_min; n <= info->n_max; n++) {
+		unsigned long fpfd;
+
+		fpfd = fin_rate / n;
+
+		if (fpfd < info->fpfd_min || fpfd > info->fpfd_max)
+			continue;
+
+		for (unsigned int m = info->m_min; m <= info->m_max; m++) {
+			unsigned int err;
+			u64 fout;
+
+			fout = div64_u64((u64)fpfd * m, dsi->info->n_mul);
+
+			if (fout < info->fout_min || fout > info->fout_max)
+				continue;
+
+			fout = div64_u64(fout, setup_info->vclk_divider);
+
+			if (fout < setup_info->clkset->min_freq ||
+			    fout > setup_info->clkset->max_freq)
+				continue;
+
+			err = abs((long)(fout - fout_target) * 10000 /
+				  (long)fout_target);
+			if (err < best_err) {
+				setup_info->m = m;
+				setup_info->n = n;
+				setup_info->fout = (unsigned long)fout;
+				best_err = err;
+
+				if (err == 0)
+					return;
+			}
+		}
+	}
+}
 
 static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 					  struct clk *clk, unsigned long target,
 					  struct dsi_setup_info *setup_info)
 {
 
-	const struct vco_cntrl_value *vco_cntrl;
+	const struct dsi_clk_config *clk_cfg;
 	unsigned long fout_target;
-	unsigned long fin, fout;
-	unsigned long hsfreq;
-	unsigned int best_err = -1;
-	unsigned int divider;
-	unsigned int n;
+	unsigned long fin_rate;
 	unsigned int i;
 	unsigned int err;
 
@@ -198,70 +397,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 	 */
 	fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format)
 		    / (2 * dsi->lanes);
-	if (fout_target < 40000000 || fout_target > 1250000000)
+	if (fout_target < MHZ(40) || fout_target > MHZ(1250))
 		return;
 
-	/* Find vco_cntrl */
-	for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) {
-		if (fout_target > vco_cntrl->min_freq &&
-		    fout_target <= vco_cntrl->max_freq) {
-			setup_info->vco_cntrl = vco_cntrl->value;
-			if (fout_target >= 1150000000)
-				setup_info->prop_cntrl = 0x0c;
-			else
-				setup_info->prop_cntrl = 0x0b;
+	/* Find PLL settings */
+	for (clk_cfg = dsi->info->clk_cfg; clk_cfg->min_freq != 0; clk_cfg++) {
+		if (fout_target > clk_cfg->min_freq &&
+		    fout_target <= clk_cfg->max_freq) {
+			setup_info->clkset = clk_cfg;
 			break;
 		}
 	}
 
-	/* Add divider */
-	setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4;
+	fin_rate = clk_get_rate(clk);
+
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		setup_info->vclk_divider = 1 << ((clk_cfg->vco_cntrl >> 4) & 0x3);
+		break;
+
+	case RCAR_DSI_V4H:
+		setup_info->vclk_divider = 1 << (((clk_cfg->vco_cntrl >> 3) & 0x7) + 1);
+		break;
+	}
+
+	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info);
 
 	/* Find hsfreqrange */
-	hsfreq = fout_target * 2;
+	setup_info->hsfreq = setup_info->fout * 2;
 	for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) {
-		if (hsfreqrange_table[i][0] >= hsfreq) {
+		if (hsfreqrange_table[i][0] >= setup_info->hsfreq) {
 			setup_info->hsfreqrange = hsfreqrange_table[i][1];
 			break;
 		}
 	}
 
-	/*
-	 * Calculate n and m for PLL clock
-	 * Following the HW manual the ranges of n and m are
-	 * n = [3-8] and m = [64-625]
-	 */
-	fin = clk_get_rate(clk);
-	divider = 1 << setup_info->div;
-	for (n = 3; n < 9; n++) {
-		unsigned long fpfd;
-		unsigned int m;
-
-		fpfd = fin / n;
-
-		for (m = 64; m < 626; m++) {
-			fout = fpfd * m / divider;
-			err = abs((long)(fout - fout_target) * 10000 /
-				  (long)fout_target);
-			if (err < best_err) {
-				setup_info->m = m - 2;
-				setup_info->n = n - 1;
-				setup_info->fout = fout;
-				best_err = err;
-				if (err == 0)
-					goto done;
-			}
-		}
-	}
+	err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target);
 
-done:
 	dev_dbg(dsi->dev,
-		"%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n",
-		clk, fin, setup_info->fout, fout_target, best_err / 100,
-		best_err % 100, setup_info->m, setup_info->n, setup_info->div);
+		"Fout = %u * %lu / (%u * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
+		setup_info->m, fin_rate, dsi->info->n_mul, setup_info->n,
+		setup_info->vclk_divider, setup_info->fout, fout_target,
+		err / 100, err % 100);
+
 	dev_dbg(dsi->dev,
 		"vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n",
-		setup_info->vco_cntrl, setup_info->prop_cntrl,
+		clk_cfg->vco_cntrl, clk_cfg->prop_cntrl,
 		setup_info->hsfreqrange);
 }
 
@@ -324,7 +506,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 {
 	struct dsi_setup_info setup_info = {};
 	unsigned int timeout;
-	int ret, i;
+	int ret;
 	int dsi_format;
 	u32 phy_setup;
 	u32 clockset2, clockset3;
@@ -360,10 +542,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 	phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange);
 	rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup);
 
-	for (i = 0; i < ARRAY_SIZE(phtw); i++) {
-		ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]);
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		ret = rcar_mipi_dsi_init_phtw_v3u(dsi);
 		if (ret < 0)
 			return ret;
+		break;
+
+	case RCAR_DSI_V4H:
+		ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info);
+		if (ret < 0)
+			return ret;
+		break;
 	}
 
 	/* PLL Clock Setting */
@@ -371,12 +562,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 	rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
 	rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
 
-	clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n)
-		  | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl);
-	clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl)
-		  | CLOCKSET3_INT_CNTRL(0)
-		  | CLOCKSET3_CPBIAS_CNTRL(0x10)
-		  | CLOCKSET3_GMP_CNTRL(1);
+	clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset)
+		  | CLOCKSET2_N(setup_info.n - 1)
+		  | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl);
+	clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl)
+		  | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl)
+		  | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl)
+		  | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl);
 	rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2);
 	rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3);
 
@@ -407,10 +599,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 		return -ETIMEDOUT;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(phtw2); i++) {
-		ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]);
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case RCAR_DSI_V4H:
+		ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info);
 		if (ret < 0)
 			return ret;
+		break;
 	}
 
 	/* Enable DOT clock */
@@ -427,8 +628,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 		dev_warn(dsi->dev, "unsupported format");
 		return -EINVAL;
 	}
-	vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div)
-		|  VCLKSET_LANE(dsi->lanes - 1);
+
+	vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1);
+
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		vclkset |= VCLKSET_DIV_V3U(__ffs(setup_info.vclk_divider));
+		break;
+
+	case RCAR_DSI_V4H:
+		vclkset |= VCLKSET_DIV_V4H(__ffs(setup_info.vclk_divider) - 1);
+		break;
+	}
 
 	rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);
 
@@ -841,8 +1053,39 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct rcar_mipi_dsi_device_info v3u_data = {
+	.model = RCAR_DSI_V3U,
+	.clk_cfg = dsi_clk_cfg_v3u,
+	.clockset2_m_offset = 2,
+	.n_min = 3,
+	.n_max = 8,
+	.n_mul = 1,
+	.fpfd_min = MHZ(2),
+	.fpfd_max = MHZ(8),
+	.m_min = 64,
+	.m_max = 625,
+	.fout_min = MHZ(320),
+	.fout_max = MHZ(1250),
+};
+
+static const struct rcar_mipi_dsi_device_info v4h_data = {
+	.model = RCAR_DSI_V4H,
+	.clk_cfg = dsi_clk_cfg_v4h,
+	.clockset2_m_offset = 0,
+	.n_min = 1,
+	.n_max = 8,
+	.n_mul = 2,
+	.fpfd_min = MHZ(8),
+	.fpfd_max = MHZ(24),
+	.m_min = 167,
+	.m_max = 1000,
+	.fout_min = MHZ(2000),
+	.fout_max = MHZ(4000),
+};
+
 static const struct of_device_id rcar_mipi_dsi_of_table[] = {
-	{ .compatible = "renesas,r8a779a0-dsi-csi2-tx" },
+	{ .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &v3u_data },
+	{ .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &v4h_data },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
index 2eaca54636f3..f8114d11f2d1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
@@ -122,7 +122,8 @@
 #define VCLKSET_CKEN			(1 << 16)
 #define VCLKSET_COLOR_RGB		(0 << 8)
 #define VCLKSET_COLOR_YCC		(1 << 8)
-#define VCLKSET_DIV(x)			(((x) & 0x3) << 4)
+#define VCLKSET_DIV_V3U(x)		(((x) & 0x3) << 4)
+#define VCLKSET_DIV_V4H(x)		(((x) & 0x7) << 4)
 #define VCLKSET_BPP_16			(0 << 2)
 #define VCLKSET_BPP_18			(1 << 2)
 #define VCLKSET_BPP_18L			(2 << 2)
@@ -166,6 +167,9 @@
 #define PHTW_CWEN			(1 << 8)
 #define PHTW_TESTDIN_CODE(x)		(((x) & 0xff) << 0)
 
+#define PHTR				0x1038
+#define PHTR_TEST			(1 << 16)
+
 #define PHTC				0x103c
 #define PHTC_TESTCLR			(1 << 0)
 
-- 
2.34.1


WARNING: multiple messages have this Message-ID (diff)
From: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
To: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Geert Uytterhoeven <geert+renesas@glider.be>,
	Magnus Damm <magnus.damm@gmail.com>,
	dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Cc: Neil Armstrong <neil.armstrong@linaro.org>,
	Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Robert Foss <robert.foss@linaro.org>,
	Andrzej Hajda <andrzej.hajda@intel.com>,
	Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Subject: [PATCH v4 7/7] drm: rcar-du: dsi: Add r8A779g0 support
Date: Wed, 30 Nov 2022 10:08:10 +0200	[thread overview]
Message-ID: <20221130080810.517470-1-tomi.valkeinen+renesas@ideasonboard.com> (raw)
In-Reply-To: <20221129134138.375411-1-tomi.valkeinen+renesas@ideasonboard.com>

Add DSI support for r8a779g0. The main differences to r8a779a0 are in
the PLL and PHTW setups.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---

Changes to v3:
- Use v3h as the default case in "switch(model)" tests
- Add Laurent's rb

 drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c      | 497 ++++++++++++++-----
 drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h |   6 +-
 2 files changed, 375 insertions(+), 128 deletions(-)

diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
index a7f2b7f66a17..e10e4d4b89a2 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi.c
@@ -9,6 +9,7 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
+#include <linux/math64.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
@@ -28,6 +29,31 @@
 #include "rcar_mipi_dsi.h"
 #include "rcar_mipi_dsi_regs.h"
 
+#define MHZ(v) ((u32)((v) * 1000000U))
+
+enum rcar_mipi_dsi_hw_model {
+	RCAR_DSI_V3U,
+	RCAR_DSI_V4H,
+};
+
+struct rcar_mipi_dsi_device_info {
+	enum rcar_mipi_dsi_hw_model model;
+
+	const struct dsi_clk_config *clk_cfg;
+
+	u8 clockset2_m_offset;
+
+	u8 n_min;
+	u8 n_max;
+	u8 n_mul;
+	unsigned long fpfd_min;
+	unsigned long fpfd_max;
+	u16 m_min;
+	u16 m_max;
+	unsigned long fout_min;
+	unsigned long fout_max;
+};
+
 struct rcar_mipi_dsi {
 	struct device *dev;
 	const struct rcar_mipi_dsi_device_info *info;
@@ -50,6 +76,17 @@ struct rcar_mipi_dsi {
 	unsigned int lanes;
 };
 
+struct dsi_setup_info {
+	unsigned long hsfreq;
+	u16 hsfreqrange;
+
+	unsigned long fout;
+	u16 m;
+	u16 n;
+	u16 vclk_divider;
+	const struct dsi_clk_config *clkset;
+};
+
 static inline struct rcar_mipi_dsi *
 bridge_to_rcar_mipi_dsi(struct drm_bridge *bridge)
 {
@@ -62,65 +99,78 @@ host_to_rcar_mipi_dsi(struct mipi_dsi_host *host)
 	return container_of(host, struct rcar_mipi_dsi, host);
 }
 
-static const u32 phtw[] = {
-	0x01020114, 0x01600115, /* General testing */
-	0x01030116, 0x0102011d, /* General testing */
-	0x011101a4, 0x018601a4, /* 1Gbps testing */
-	0x014201a0, 0x010001a3, /* 1Gbps testing */
-	0x0101011f,		/* 1Gbps testing */
-};
-
-static const u32 phtw2[] = {
-	0x010c0130, 0x010c0140, /* General testing */
-	0x010c0150, 0x010c0180, /* General testing */
-	0x010c0190,
-	0x010a0160, 0x010a0170,
-	0x01800164, 0x01800174,	/* 1Gbps testing */
-};
-
 static const u32 hsfreqrange_table[][2] = {
-	{ 80000000U,   0x00 }, { 90000000U,   0x10 }, { 100000000U,  0x20 },
-	{ 110000000U,  0x30 }, { 120000000U,  0x01 }, { 130000000U,  0x11 },
-	{ 140000000U,  0x21 }, { 150000000U,  0x31 }, { 160000000U,  0x02 },
-	{ 170000000U,  0x12 }, { 180000000U,  0x22 }, { 190000000U,  0x32 },
-	{ 205000000U,  0x03 }, { 220000000U,  0x13 }, { 235000000U,  0x23 },
-	{ 250000000U,  0x33 }, { 275000000U,  0x04 }, { 300000000U,  0x14 },
-	{ 325000000U,  0x25 }, { 350000000U,  0x35 }, { 400000000U,  0x05 },
-	{ 450000000U,  0x16 }, { 500000000U,  0x26 }, { 550000000U,  0x37 },
-	{ 600000000U,  0x07 }, { 650000000U,  0x18 }, { 700000000U,  0x28 },
-	{ 750000000U,  0x39 }, { 800000000U,  0x09 }, { 850000000U,  0x19 },
-	{ 900000000U,  0x29 }, { 950000000U,  0x3a }, { 1000000000U, 0x0a },
-	{ 1050000000U, 0x1a }, { 1100000000U, 0x2a }, { 1150000000U, 0x3b },
-	{ 1200000000U, 0x0b }, { 1250000000U, 0x1b }, { 1300000000U, 0x2b },
-	{ 1350000000U, 0x3c }, { 1400000000U, 0x0c }, { 1450000000U, 0x1c },
-	{ 1500000000U, 0x2c }, { 1550000000U, 0x3d }, { 1600000000U, 0x0d },
-	{ 1650000000U, 0x1d }, { 1700000000U, 0x2e }, { 1750000000U, 0x3e },
-	{ 1800000000U, 0x0e }, { 1850000000U, 0x1e }, { 1900000000U, 0x2f },
-	{ 1950000000U, 0x3f }, { 2000000000U, 0x0f }, { 2050000000U, 0x40 },
-	{ 2100000000U, 0x41 }, { 2150000000U, 0x42 }, { 2200000000U, 0x43 },
-	{ 2250000000U, 0x44 }, { 2300000000U, 0x45 }, { 2350000000U, 0x46 },
-	{ 2400000000U, 0x47 }, { 2450000000U, 0x48 }, { 2500000000U, 0x49 },
+	{   MHZ(80), 0x00 }, {   MHZ(90), 0x10 }, {  MHZ(100), 0x20 },
+	{  MHZ(110), 0x30 }, {  MHZ(120), 0x01 }, {  MHZ(130), 0x11 },
+	{  MHZ(140), 0x21 }, {  MHZ(150), 0x31 }, {  MHZ(160), 0x02 },
+	{  MHZ(170), 0x12 }, {  MHZ(180), 0x22 }, {  MHZ(190), 0x32 },
+	{  MHZ(205), 0x03 }, {  MHZ(220), 0x13 }, {  MHZ(235), 0x23 },
+	{  MHZ(250), 0x33 }, {  MHZ(275), 0x04 }, {  MHZ(300), 0x14 },
+	{  MHZ(325), 0x25 }, {  MHZ(350), 0x35 }, {  MHZ(400), 0x05 },
+	{  MHZ(450), 0x16 }, {  MHZ(500), 0x26 }, {  MHZ(550), 0x37 },
+	{  MHZ(600), 0x07 }, {  MHZ(650), 0x18 }, {  MHZ(700), 0x28 },
+	{  MHZ(750), 0x39 }, {  MHZ(800), 0x09 }, {  MHZ(850), 0x19 },
+	{  MHZ(900), 0x29 }, {  MHZ(950), 0x3a }, { MHZ(1000), 0x0a },
+	{ MHZ(1050), 0x1a }, { MHZ(1100), 0x2a }, { MHZ(1150), 0x3b },
+	{ MHZ(1200), 0x0b }, { MHZ(1250), 0x1b }, { MHZ(1300), 0x2b },
+	{ MHZ(1350), 0x3c }, { MHZ(1400), 0x0c }, { MHZ(1450), 0x1c },
+	{ MHZ(1500), 0x2c }, { MHZ(1550), 0x3d }, { MHZ(1600), 0x0d },
+	{ MHZ(1650), 0x1d }, { MHZ(1700), 0x2e }, { MHZ(1750), 0x3e },
+	{ MHZ(1800), 0x0e }, { MHZ(1850), 0x1e }, { MHZ(1900), 0x2f },
+	{ MHZ(1950), 0x3f }, { MHZ(2000), 0x0f }, { MHZ(2050), 0x40 },
+	{ MHZ(2100), 0x41 }, { MHZ(2150), 0x42 }, { MHZ(2200), 0x43 },
+	{ MHZ(2250), 0x44 }, { MHZ(2300), 0x45 }, { MHZ(2350), 0x46 },
+	{ MHZ(2400), 0x47 }, { MHZ(2450), 0x48 }, { MHZ(2500), 0x49 },
 	{ /* sentinel */ },
 };
 
-struct vco_cntrl_value {
+struct dsi_clk_config {
 	u32 min_freq;
 	u32 max_freq;
-	u16 value;
+	u8 vco_cntrl;
+	u8 cpbias_cntrl;
+	u8 gmp_cntrl;
+	u8 int_cntrl;
+	u8 prop_cntrl;
 };
 
-static const struct vco_cntrl_value vco_cntrl_table[] = {
-	{ .min_freq = 40000000U,   .max_freq = 55000000U,   .value = 0x3f },
-	{ .min_freq = 52500000U,   .max_freq = 80000000U,   .value = 0x39 },
-	{ .min_freq = 80000000U,   .max_freq = 110000000U,  .value = 0x2f },
-	{ .min_freq = 105000000U,  .max_freq = 160000000U,  .value = 0x29 },
-	{ .min_freq = 160000000U,  .max_freq = 220000000U,  .value = 0x1f },
-	{ .min_freq = 210000000U,  .max_freq = 320000000U,  .value = 0x19 },
-	{ .min_freq = 320000000U,  .max_freq = 440000000U,  .value = 0x0f },
-	{ .min_freq = 420000000U,  .max_freq = 660000000U,  .value = 0x09 },
-	{ .min_freq = 630000000U,  .max_freq = 1149000000U, .value = 0x03 },
-	{ .min_freq = 1100000000U, .max_freq = 1152000000U, .value = 0x01 },
-	{ .min_freq = 1150000000U, .max_freq = 1250000000U, .value = 0x01 },
+static const struct dsi_clk_config dsi_clk_cfg_v3u[] = {
+	{   MHZ(40),    MHZ(55), 0x3f, 0x10, 0x01, 0x00, 0x0b },
+	{   MHZ(52.5),  MHZ(80), 0x39, 0x10, 0x01, 0x00, 0x0b },
+	{   MHZ(80),   MHZ(110), 0x2f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(105),   MHZ(160), 0x29, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(160),   MHZ(220), 0x1f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(210),   MHZ(320), 0x19, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(320),   MHZ(440), 0x0f, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(420),   MHZ(660), 0x09, 0x10, 0x01, 0x00, 0x0b },
+	{  MHZ(630),  MHZ(1149), 0x03, 0x10, 0x01, 0x00, 0x0b },
+	{ MHZ(1100),  MHZ(1152), 0x01, 0x10, 0x01, 0x00, 0x0b },
+	{ MHZ(1150),  MHZ(1250), 0x01, 0x10, 0x01, 0x00, 0x0c },
+	{ /* sentinel */ },
+};
+
+static const struct dsi_clk_config dsi_clk_cfg_v4h[] = {
+	{   MHZ(40),    MHZ(45.31),  0x2b, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(45.31), MHZ(54.66),  0x28, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(54.66), MHZ(62.5),   0x28, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(62.5),  MHZ(75),     0x27, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(75),    MHZ(90.63),  0x23, 0x00, 0x00, 0x08, 0x0a },
+	{   MHZ(90.63), MHZ(109.37), 0x20, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(109.37), MHZ(125),    0x20, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(125),    MHZ(150),    0x1f, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(150),    MHZ(181.25), 0x1b, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(181.25), MHZ(218.75), 0x18, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(218.75), MHZ(250),    0x18, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(250),    MHZ(300),    0x17, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(300),    MHZ(362.5),  0x13, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(362.5),  MHZ(455.48), 0x10, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(455.48), MHZ(500),    0x10, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(500),    MHZ(600),    0x0f, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(600),    MHZ(725),    0x0b, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(725),    MHZ(875),    0x08, 0x00, 0x00, 0x08, 0x0a },
+	{  MHZ(875),   MHZ(1000),    0x08, 0x00, 0x00, 0x08, 0x0a },
+	{ MHZ(1000),   MHZ(1200),    0x07, 0x00, 0x00, 0x08, 0x0a },
+	{ MHZ(1200),   MHZ(1250),    0x03, 0x00, 0x00, 0x08, 0x0a },
 	{ /* sentinel */ },
 };
 
@@ -144,7 +194,7 @@ static void rcar_mipi_dsi_set(struct rcar_mipi_dsi *dsi, u32 reg, u32 set)
 	rcar_mipi_dsi_write(dsi, reg, rcar_mipi_dsi_read(dsi, reg) | set);
 }
 
-static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
+static int rcar_mipi_dsi_write_phtw(struct rcar_mipi_dsi *dsi, u32 phtw)
 {
 	u32 status;
 	int ret;
@@ -163,32 +213,181 @@ static int rcar_mipi_dsi_phtw_test(struct rcar_mipi_dsi *dsi, u32 phtw)
 	return ret;
 }
 
+static int rcar_mipi_dsi_write_phtw_arr(struct rcar_mipi_dsi *dsi,
+					const u32 *phtw, unsigned int size)
+{
+	for (unsigned int i = 0; i < size; i++) {
+		int ret = rcar_mipi_dsi_write_phtw(dsi, phtw[i]);
+
+		if (ret < 0)
+			return ret;
+	}
+
+	return 0;
+}
+
+#define WRITE_PHTW(...)                                               \
+	({                                                            \
+		static const u32 phtw[] = { __VA_ARGS__ };            \
+		int ret;                                              \
+		ret = rcar_mipi_dsi_write_phtw_arr(dsi, phtw,         \
+						   ARRAY_SIZE(phtw)); \
+		ret;                                                  \
+	})
+
+static int rcar_mipi_dsi_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
+{
+	return WRITE_PHTW(0x01020114, 0x01600115, 0x01030116, 0x0102011d,
+			  0x011101a4, 0x018601a4, 0x014201a0, 0x010001a3,
+			  0x0101011f);
+}
+
+static int rcar_mipi_dsi_post_init_phtw_v3u(struct rcar_mipi_dsi *dsi)
+{
+	return WRITE_PHTW(0x010c0130, 0x010c0140, 0x010c0150, 0x010c0180,
+			  0x010c0190, 0x010a0160, 0x010a0170, 0x01800164,
+			  0x01800174);
+}
+
+static int rcar_mipi_dsi_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
+				       const struct dsi_setup_info *setup_info)
+{
+	int ret;
+
+	if (setup_info->hsfreq < MHZ(450)) {
+		ret = WRITE_PHTW(0x01010100, 0x011b01ac);
+		if (ret)
+			return ret;
+	}
+
+	ret = WRITE_PHTW(0x01010100, 0x01030173, 0x01000174, 0x01500175,
+			 0x01030176, 0x01040166, 0x010201ad);
+	if (ret)
+		return ret;
+
+	if (setup_info->hsfreq <= MHZ(1000))
+		ret = WRITE_PHTW(0x01020100, 0x01910170, 0x01020171,
+				 0x01110172);
+	else if (setup_info->hsfreq <= MHZ(1500))
+		ret = WRITE_PHTW(0x01020100, 0x01980170, 0x01030171,
+				 0x01100172);
+	else if (setup_info->hsfreq <= MHZ(2500))
+		ret = WRITE_PHTW(0x01020100, 0x0144016b, 0x01000172);
+	else
+		return -EINVAL;
+
+	if (ret)
+		return ret;
+
+	if (dsi->lanes <= 1) {
+		ret = WRITE_PHTW(0x01070100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (dsi->lanes <= 2) {
+		ret = WRITE_PHTW(0x01090100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (dsi->lanes <= 3) {
+		ret = WRITE_PHTW(0x010b0100, 0x010e010b);
+		if (ret)
+			return ret;
+	}
+
+	if (setup_info->hsfreq <= MHZ(1500)) {
+		ret = WRITE_PHTW(0x01010100, 0x01c0016e);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int
+rcar_mipi_dsi_post_init_phtw_v4h(struct rcar_mipi_dsi *dsi,
+				 const struct dsi_setup_info *setup_info)
+{
+	u32 status;
+	int ret;
+
+	if (setup_info->hsfreq <= MHZ(1500)) {
+		WRITE_PHTW(0x01020100, 0x00000180);
+
+		ret = read_poll_timeout(rcar_mipi_dsi_read, status,
+					status & PHTR_TEST, 2000, 10000, false,
+					dsi, PHTR);
+		if (ret < 0) {
+			dev_err(dsi->dev, "failed to test PHTR\n");
+			return ret;
+		}
+
+		WRITE_PHTW(0x01010100, 0x0100016e);
+	}
+
+	return 0;
+}
+
 /* -----------------------------------------------------------------------------
  * Hardware Setup
  */
 
-struct dsi_setup_info {
-	unsigned long fout;
-	u16 vco_cntrl;
-	u16 prop_cntrl;
-	u16 hsfreqrange;
-	u16 div;
-	unsigned int m;
-	unsigned int n;
-};
+static void rcar_mipi_dsi_pll_calc(struct rcar_mipi_dsi *dsi,
+				   unsigned long fin_rate,
+				   unsigned long fout_target,
+				   struct dsi_setup_info *setup_info)
+{
+	unsigned int best_err = -1;
+	const struct rcar_mipi_dsi_device_info *info = dsi->info;
+
+	for (unsigned int n = info->n_min; n <= info->n_max; n++) {
+		unsigned long fpfd;
+
+		fpfd = fin_rate / n;
+
+		if (fpfd < info->fpfd_min || fpfd > info->fpfd_max)
+			continue;
+
+		for (unsigned int m = info->m_min; m <= info->m_max; m++) {
+			unsigned int err;
+			u64 fout;
+
+			fout = div64_u64((u64)fpfd * m, dsi->info->n_mul);
+
+			if (fout < info->fout_min || fout > info->fout_max)
+				continue;
+
+			fout = div64_u64(fout, setup_info->vclk_divider);
+
+			if (fout < setup_info->clkset->min_freq ||
+			    fout > setup_info->clkset->max_freq)
+				continue;
+
+			err = abs((long)(fout - fout_target) * 10000 /
+				  (long)fout_target);
+			if (err < best_err) {
+				setup_info->m = m;
+				setup_info->n = n;
+				setup_info->fout = (unsigned long)fout;
+				best_err = err;
+
+				if (err == 0)
+					return;
+			}
+		}
+	}
+}
 
 static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 					  struct clk *clk, unsigned long target,
 					  struct dsi_setup_info *setup_info)
 {
 
-	const struct vco_cntrl_value *vco_cntrl;
+	const struct dsi_clk_config *clk_cfg;
 	unsigned long fout_target;
-	unsigned long fin, fout;
-	unsigned long hsfreq;
-	unsigned int best_err = -1;
-	unsigned int divider;
-	unsigned int n;
+	unsigned long fin_rate;
 	unsigned int i;
 	unsigned int err;
 
@@ -198,70 +397,53 @@ static void rcar_mipi_dsi_parameters_calc(struct rcar_mipi_dsi *dsi,
 	 */
 	fout_target = target * mipi_dsi_pixel_format_to_bpp(dsi->format)
 		    / (2 * dsi->lanes);
-	if (fout_target < 40000000 || fout_target > 1250000000)
+	if (fout_target < MHZ(40) || fout_target > MHZ(1250))
 		return;
 
-	/* Find vco_cntrl */
-	for (vco_cntrl = vco_cntrl_table; vco_cntrl->min_freq != 0; vco_cntrl++) {
-		if (fout_target > vco_cntrl->min_freq &&
-		    fout_target <= vco_cntrl->max_freq) {
-			setup_info->vco_cntrl = vco_cntrl->value;
-			if (fout_target >= 1150000000)
-				setup_info->prop_cntrl = 0x0c;
-			else
-				setup_info->prop_cntrl = 0x0b;
+	/* Find PLL settings */
+	for (clk_cfg = dsi->info->clk_cfg; clk_cfg->min_freq != 0; clk_cfg++) {
+		if (fout_target > clk_cfg->min_freq &&
+		    fout_target <= clk_cfg->max_freq) {
+			setup_info->clkset = clk_cfg;
 			break;
 		}
 	}
 
-	/* Add divider */
-	setup_info->div = (setup_info->vco_cntrl & 0x30) >> 4;
+	fin_rate = clk_get_rate(clk);
+
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		setup_info->vclk_divider = 1 << ((clk_cfg->vco_cntrl >> 4) & 0x3);
+		break;
+
+	case RCAR_DSI_V4H:
+		setup_info->vclk_divider = 1 << (((clk_cfg->vco_cntrl >> 3) & 0x7) + 1);
+		break;
+	}
+
+	rcar_mipi_dsi_pll_calc(dsi, fin_rate, fout_target, setup_info);
 
 	/* Find hsfreqrange */
-	hsfreq = fout_target * 2;
+	setup_info->hsfreq = setup_info->fout * 2;
 	for (i = 0; i < ARRAY_SIZE(hsfreqrange_table); i++) {
-		if (hsfreqrange_table[i][0] >= hsfreq) {
+		if (hsfreqrange_table[i][0] >= setup_info->hsfreq) {
 			setup_info->hsfreqrange = hsfreqrange_table[i][1];
 			break;
 		}
 	}
 
-	/*
-	 * Calculate n and m for PLL clock
-	 * Following the HW manual the ranges of n and m are
-	 * n = [3-8] and m = [64-625]
-	 */
-	fin = clk_get_rate(clk);
-	divider = 1 << setup_info->div;
-	for (n = 3; n < 9; n++) {
-		unsigned long fpfd;
-		unsigned int m;
-
-		fpfd = fin / n;
-
-		for (m = 64; m < 626; m++) {
-			fout = fpfd * m / divider;
-			err = abs((long)(fout - fout_target) * 10000 /
-				  (long)fout_target);
-			if (err < best_err) {
-				setup_info->m = m - 2;
-				setup_info->n = n - 1;
-				setup_info->fout = fout;
-				best_err = err;
-				if (err == 0)
-					goto done;
-			}
-		}
-	}
+	err = abs((long)(setup_info->fout - fout_target) * 10000 / (long)fout_target);
 
-done:
 	dev_dbg(dsi->dev,
-		"%pC %lu Hz -> Fout %lu Hz (target %lu Hz, error %d.%02u%%), PLL M/N/DIV %u/%u/%u\n",
-		clk, fin, setup_info->fout, fout_target, best_err / 100,
-		best_err % 100, setup_info->m, setup_info->n, setup_info->div);
+		"Fout = %u * %lu / (%u * %u * %u) = %lu (target %lu Hz, error %d.%02u%%)\n",
+		setup_info->m, fin_rate, dsi->info->n_mul, setup_info->n,
+		setup_info->vclk_divider, setup_info->fout, fout_target,
+		err / 100, err % 100);
+
 	dev_dbg(dsi->dev,
 		"vco_cntrl = 0x%x\tprop_cntrl = 0x%x\thsfreqrange = 0x%x\n",
-		setup_info->vco_cntrl, setup_info->prop_cntrl,
+		clk_cfg->vco_cntrl, clk_cfg->prop_cntrl,
 		setup_info->hsfreqrange);
 }
 
@@ -324,7 +506,7 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 {
 	struct dsi_setup_info setup_info = {};
 	unsigned int timeout;
-	int ret, i;
+	int ret;
 	int dsi_format;
 	u32 phy_setup;
 	u32 clockset2, clockset3;
@@ -360,10 +542,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 	phy_setup |= PHYSETUP_HSFREQRANGE(setup_info.hsfreqrange);
 	rcar_mipi_dsi_write(dsi, PHYSETUP, phy_setup);
 
-	for (i = 0; i < ARRAY_SIZE(phtw); i++) {
-		ret = rcar_mipi_dsi_phtw_test(dsi, phtw[i]);
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		ret = rcar_mipi_dsi_init_phtw_v3u(dsi);
 		if (ret < 0)
 			return ret;
+		break;
+
+	case RCAR_DSI_V4H:
+		ret = rcar_mipi_dsi_init_phtw_v4h(dsi, &setup_info);
+		if (ret < 0)
+			return ret;
+		break;
 	}
 
 	/* PLL Clock Setting */
@@ -371,12 +562,13 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 	rcar_mipi_dsi_set(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
 	rcar_mipi_dsi_clr(dsi, CLOCKSET1, CLOCKSET1_SHADOW_CLEAR);
 
-	clockset2 = CLOCKSET2_M(setup_info.m) | CLOCKSET2_N(setup_info.n)
-		  | CLOCKSET2_VCO_CNTRL(setup_info.vco_cntrl);
-	clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.prop_cntrl)
-		  | CLOCKSET3_INT_CNTRL(0)
-		  | CLOCKSET3_CPBIAS_CNTRL(0x10)
-		  | CLOCKSET3_GMP_CNTRL(1);
+	clockset2 = CLOCKSET2_M(setup_info.m - dsi->info->clockset2_m_offset)
+		  | CLOCKSET2_N(setup_info.n - 1)
+		  | CLOCKSET2_VCO_CNTRL(setup_info.clkset->vco_cntrl);
+	clockset3 = CLOCKSET3_PROP_CNTRL(setup_info.clkset->prop_cntrl)
+		  | CLOCKSET3_INT_CNTRL(setup_info.clkset->int_cntrl)
+		  | CLOCKSET3_CPBIAS_CNTRL(setup_info.clkset->cpbias_cntrl)
+		  | CLOCKSET3_GMP_CNTRL(setup_info.clkset->gmp_cntrl);
 	rcar_mipi_dsi_write(dsi, CLOCKSET2, clockset2);
 	rcar_mipi_dsi_write(dsi, CLOCKSET3, clockset3);
 
@@ -407,10 +599,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 		return -ETIMEDOUT;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(phtw2); i++) {
-		ret = rcar_mipi_dsi_phtw_test(dsi, phtw2[i]);
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		ret = rcar_mipi_dsi_post_init_phtw_v3u(dsi);
+		if (ret < 0)
+			return ret;
+		break;
+
+	case RCAR_DSI_V4H:
+		ret = rcar_mipi_dsi_post_init_phtw_v4h(dsi, &setup_info);
 		if (ret < 0)
 			return ret;
+		break;
 	}
 
 	/* Enable DOT clock */
@@ -427,8 +628,19 @@ static int rcar_mipi_dsi_startup(struct rcar_mipi_dsi *dsi,
 		dev_warn(dsi->dev, "unsupported format");
 		return -EINVAL;
 	}
-	vclkset |= VCLKSET_COLOR_RGB | VCLKSET_DIV(setup_info.div)
-		|  VCLKSET_LANE(dsi->lanes - 1);
+
+	vclkset |= VCLKSET_COLOR_RGB | VCLKSET_LANE(dsi->lanes - 1);
+
+	switch (dsi->info->model) {
+	case RCAR_DSI_V3U:
+	default:
+		vclkset |= VCLKSET_DIV_V3U(__ffs(setup_info.vclk_divider));
+		break;
+
+	case RCAR_DSI_V4H:
+		vclkset |= VCLKSET_DIV_V4H(__ffs(setup_info.vclk_divider) - 1);
+		break;
+	}
 
 	rcar_mipi_dsi_write(dsi, VCLKSET, vclkset);
 
@@ -841,8 +1053,39 @@ static int rcar_mipi_dsi_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct rcar_mipi_dsi_device_info v3u_data = {
+	.model = RCAR_DSI_V3U,
+	.clk_cfg = dsi_clk_cfg_v3u,
+	.clockset2_m_offset = 2,
+	.n_min = 3,
+	.n_max = 8,
+	.n_mul = 1,
+	.fpfd_min = MHZ(2),
+	.fpfd_max = MHZ(8),
+	.m_min = 64,
+	.m_max = 625,
+	.fout_min = MHZ(320),
+	.fout_max = MHZ(1250),
+};
+
+static const struct rcar_mipi_dsi_device_info v4h_data = {
+	.model = RCAR_DSI_V4H,
+	.clk_cfg = dsi_clk_cfg_v4h,
+	.clockset2_m_offset = 0,
+	.n_min = 1,
+	.n_max = 8,
+	.n_mul = 2,
+	.fpfd_min = MHZ(8),
+	.fpfd_max = MHZ(24),
+	.m_min = 167,
+	.m_max = 1000,
+	.fout_min = MHZ(2000),
+	.fout_max = MHZ(4000),
+};
+
 static const struct of_device_id rcar_mipi_dsi_of_table[] = {
-	{ .compatible = "renesas,r8a779a0-dsi-csi2-tx" },
+	{ .compatible = "renesas,r8a779a0-dsi-csi2-tx", .data = &v3u_data },
+	{ .compatible = "renesas,r8a779g0-dsi-csi2-tx", .data = &v4h_data },
 	{ }
 };
 
diff --git a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
index 2eaca54636f3..f8114d11f2d1 100644
--- a/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
+++ b/drivers/gpu/drm/rcar-du/rcar_mipi_dsi_regs.h
@@ -122,7 +122,8 @@
 #define VCLKSET_CKEN			(1 << 16)
 #define VCLKSET_COLOR_RGB		(0 << 8)
 #define VCLKSET_COLOR_YCC		(1 << 8)
-#define VCLKSET_DIV(x)			(((x) & 0x3) << 4)
+#define VCLKSET_DIV_V3U(x)		(((x) & 0x3) << 4)
+#define VCLKSET_DIV_V4H(x)		(((x) & 0x7) << 4)
 #define VCLKSET_BPP_16			(0 << 2)
 #define VCLKSET_BPP_18			(1 << 2)
 #define VCLKSET_BPP_18L			(2 << 2)
@@ -166,6 +167,9 @@
 #define PHTW_CWEN			(1 << 8)
 #define PHTW_TESTDIN_CODE(x)		(((x) & 0xff) << 0)
 
+#define PHTR				0x1038
+#define PHTR_TEST			(1 << 16)
+
 #define PHTC				0x103c
 #define PHTC_TESTCLR			(1 << 0)
 
-- 
2.34.1


  parent reply	other threads:[~2022-11-30  8:08 UTC|newest]

Thread overview: 50+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-11-23  6:59 [PATCH v2 0/7] Renesas V4H DSI & DP output support Tomi Valkeinen
2022-11-23  6:59 ` Tomi Valkeinen
2022-11-23  6:59 ` [PATCH v2 1/7] dt-bindings: display: renesas,du: Provide bindings for r8a779g0 Tomi Valkeinen
2022-11-23  6:59   ` [PATCH v2 1/7] dt-bindings: display: renesas, du: " Tomi Valkeinen
2022-11-23  6:59 ` [PATCH v2 2/7] dt-bindings: display: bridge: renesas,dsi-csi2-tx: Add r8a779g0 Tomi Valkeinen
2022-11-23  6:59   ` [PATCH v2 2/7] dt-bindings: display: bridge: renesas, dsi-csi2-tx: " Tomi Valkeinen
2022-11-23  6:59 ` [PATCH v2 3/7] clk: renesas: r8a779g0: Add display related clocks Tomi Valkeinen
2022-11-23  6:59   ` Tomi Valkeinen
2022-11-30 19:18   ` Geert Uytterhoeven
2022-11-30 19:18     ` Geert Uytterhoeven
2022-12-01  9:06     ` Tomi Valkeinen
2022-12-01  9:06       ` Tomi Valkeinen
2022-12-01  9:34       ` Geert Uytterhoeven
2022-12-01  9:34         ` Geert Uytterhoeven
2022-12-01  9:26     ` Tomi Valkeinen
2022-12-01  9:26       ` Tomi Valkeinen
2022-12-01  9:45       ` Geert Uytterhoeven
2022-12-01  9:45         ` Geert Uytterhoeven
2022-11-23  6:59 ` [PATCH v2 4/7] arm64: dts: renesas: r8a779g0: Add display related nodes Tomi Valkeinen
2022-11-23  6:59   ` Tomi Valkeinen
2022-12-01  9:20   ` Geert Uytterhoeven
2022-12-01  9:20     ` Geert Uytterhoeven
2022-11-23  6:59 ` [PATCH v2 5/7] arm64: dts: renesas: white-hawk-cpu: Add DP output support Tomi Valkeinen
2022-11-23  6:59   ` Tomi Valkeinen
2022-12-01 10:03   ` Geert Uytterhoeven
2022-12-01 10:03     ` Geert Uytterhoeven
2022-11-23  6:59 ` [PATCH v2 6/7] drm: rcar-du: Add r8a779g0 support Tomi Valkeinen
2022-11-23  6:59   ` Tomi Valkeinen
2022-11-23  6:59 ` [PATCH v2 7/7] drm: rcar-du: dsi: " Tomi Valkeinen
2022-11-23  6:59   ` Tomi Valkeinen
2022-11-29  1:49   ` Laurent Pinchart
2022-11-29  1:49     ` Laurent Pinchart
2022-11-29 11:30     ` Tomi Valkeinen
2022-11-29 11:30       ` Tomi Valkeinen
2022-11-29 11:40       ` Biju Das
2022-11-29 11:40         ` Biju Das
2022-11-29 11:49         ` Geert Uytterhoeven
2022-11-29 11:49           ` Geert Uytterhoeven
2022-11-29 12:05       ` Laurent Pinchart
2022-11-29 12:05         ` Laurent Pinchart
2022-11-29 12:59     ` Tomi Valkeinen
2022-11-29 12:59       ` Tomi Valkeinen
2022-11-29 13:41   ` [PATCH v3 7/7] drm: rcar-du: dsi: Add r8A779g0 support Tomi Valkeinen
2022-11-29 13:41     ` Tomi Valkeinen
2022-11-29 17:44     ` Laurent Pinchart
2022-11-29 17:44       ` Laurent Pinchart
2022-11-30  8:08     ` Tomi Valkeinen [this message]
2022-11-30  8:08       ` [PATCH v4 " Tomi Valkeinen
2022-11-29  1:58 ` [PATCH v2 0/7] Renesas V4H DSI & DP output support Laurent Pinchart
2022-11-29  1:58   ` Laurent Pinchart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20221130080810.517470-1-tomi.valkeinen+renesas@ideasonboard.com \
    --to=tomi.valkeinen+renesas@ideasonboard.com \
    --cc=andrzej.hajda@intel.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert+renesas@glider.be \
    --cc=jernej.skrabec@gmail.com \
    --cc=jonas@kwiboo.se \
    --cc=kieran.bingham+renesas@ideasonboard.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=laurent.pinchart+renesas@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=neil.armstrong@linaro.org \
    --cc=robert.foss@linaro.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.