From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
To: "Lars-Peter Clausen" <lars@metafoo.de>,
"Michael Hennerich" <Michael.Hennerich@analog.com>,
"Jonathan Cameron" <jic23@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Lucas Stankus" <lucas.p.stankus@gmail.com>,
"Puranjay Mohan" <puranjay12@gmail.com>,
"Dmitry Rokosov" <ddrokosov@sberdevices.ru>,
"Alexandru Tachici" <alexandru.tachici@analog.com>,
"Marcelo Schmitt" <marcelo.schmitt1@gmail.com>,
"Renato Lui Geh" <renatogeh@gmail.com>,
"Eugen Hristev" <eugen.hristev@microchip.com>,
"Nicolas Ferre" <nicolas.ferre@microchip.com>,
"Alexandre Belloni" <alexandre.belloni@bootlin.com>,
"Claudiu Beznea" <claudiu.beznea@microchip.com>,
"Andreas Klinger" <ak@it-klinger.de>,
"Marcus Folkesson" <marcus.folkesson@gmail.com>,
"Kent Gustavsson" <kent@minoris.se>,
"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
"Alim Akhtar" <alim.akhtar@samsung.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
"Alexandre Torgue" <alexandre.torgue@foss.st.com>,
"Oleksij Rempel" <linux@rempel-privat.de>,
kernel@pengutronix.de, "Nuno Sá" <nuno.sa@analog.com>,
"Nishant Malpani" <nish.malpani25@gmail.com>,
"Rui Miguel Silva" <rmfrfs@gmail.com>,
"Dragos Bogdan" <dragos.bogdan@analog.com>,
"Jean-Baptiste Maneyrol" <jmaneyrol@invensense.com>,
"Lorenzo Bianconi" <lorenzo@kernel.org>,
"Benson Leung" <bleung@chromium.org>,
"Guenter Roeck" <groeck@chromium.org>,
"Stefan Popa" <stefan.popa@analog.com>,
"Robert Yang" <decatf@gmail.com>,
"Sean Nyekjaer" <sean@geanix.com>,
"Artur Rojek" <contact@artur-rojek.eu>,
"Miquel Raynal" <miquel.raynal@bootlin.com>,
"Philippe Reynes" <tremyfr@yahoo.fr>,
"Alexandru Lazar" <alazar@startmail.com>,
"Linus Walleij" <linus.walleij@linaro.org>,
"Caleb Connolly" <caleb.connolly@linaro.org>,
"Fabrice Gasnier" <fabrice.gasnier@foss.st.com>,
"Stefan Agner" <stefan@agner.ch>,
"Daniel Baluta" <daniel.baluta@nxp.com>,
"Harald Geyer" <harald@ccbib.org>,
"Eugene Zaikonnikov" <ez@norophonic.com>,
"Phil Reid" <preid@electromag.com.au>,
"Matt Ranostay" <matt.ranostay@konsulko.com>,
"Stephen Boyd" <swboyd@chromium.org>,
"Sankar Velliangiri" <navin@linumiz.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-renesas-soc@vger.kernel.org,
linux-samsung-soc@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
chrome-platform@lists.linux.dev
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Subject: [PATCH 3/5] dt-bindings: iio: correct node names in examples
Date: Wed, 18 Jan 2023 19:44:11 +0100 [thread overview]
Message-ID: <20230118184413.395820-3-krzysztof.kozlowski@linaro.org> (raw)
In-Reply-To: <20230118184413.395820-1-krzysztof.kozlowski@linaro.org>
Do not use underscores and unneeded suffixes (e.g. i2c0) in node name in
examples.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../devicetree/bindings/iio/accel/adi,adis16201.yaml | 2 +-
.../devicetree/bindings/iio/accel/adi,adis16240.yaml | 2 +-
.../devicetree/bindings/iio/accel/adi,adxl313.yaml | 2 +-
.../devicetree/bindings/iio/accel/adi,adxl345.yaml | 4 ++--
.../devicetree/bindings/iio/accel/bosch,bma220.yaml | 2 +-
.../devicetree/bindings/iio/accel/nxp,fxls8962af.yaml | 4 ++--
Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 2 +-
Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 2 +-
Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml | 2 +-
.../devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml | 2 +-
.../devicetree/bindings/iio/adc/st,stmpe-adc.yaml | 8 +++-----
.../devicetree/bindings/iio/frequency/adf4371.yaml | 2 +-
.../devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml | 4 ++--
.../devicetree/bindings/iio/health/ti,afe4403.yaml | 2 +-
.../devicetree/bindings/iio/health/ti,afe4404.yaml | 2 +-
Documentation/devicetree/bindings/iio/humidity/dht11.yaml | 2 +-
.../devicetree/bindings/iio/humidity/ti,hdc2010.yaml | 2 +-
.../devicetree/bindings/iio/imu/adi,adis16460.yaml | 2 +-
.../devicetree/bindings/iio/imu/invensense,icm42600.yaml | 4 ++--
.../devicetree/bindings/iio/imu/nxp,fxos8700.yaml | 4 ++--
.../devicetree/bindings/iio/pressure/asc,dlhl60d.yaml | 2 +-
.../devicetree/bindings/iio/pressure/bmp085.yaml | 2 +-
.../bindings/iio/temperature/maxim,max31865.yaml | 2 +-
23 files changed, 30 insertions(+), 32 deletions(-)
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
index 7332442e5661..b6ba7ad1a8d5 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16201.yaml
@@ -41,7 +41,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
index f6f97164c2ca..5887021cc90f 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -39,7 +39,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
index 185b68ffb536..0c5b64cae965 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
@@ -59,7 +59,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
index 346abfb13a3a..07cacc3f6a97 100644
--- a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -49,7 +49,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -64,7 +64,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
index 5dd06f5905b4..ec643de031a3 100644
--- a/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma220.yaml
@@ -36,7 +36,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
index 65ce8ea14b52..783c7ddfcd90 100644
--- a/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
+++ b/Documentation/devicetree/bindings/iio/accel/nxp,fxls8962af.yaml
@@ -50,7 +50,7 @@ unevaluatedProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -65,7 +65,7 @@ examples:
};
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
index cc347dade4ef..1d965124c488 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
@@ -99,7 +99,7 @@ unevaluatedProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index ac5a47c8f070..b05652dfd4a2 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -112,7 +112,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
index a67ba67dab51..5fcc8dd012f1 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7780.yaml
@@ -72,7 +72,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/gpio/gpio.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
index 18aaf6df179d..73def67fbe01 100644
--- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-iadc.yaml
@@ -50,7 +50,7 @@ additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- spmi_bus {
+ spmi {
#address-cells = <1>;
#size-cells = <0>;
pmic_iadc: adc@3600 {
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
index 333744a2159c..474e35c49348 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stmpe-adc.yaml
@@ -35,10 +35,8 @@ additionalProperties: false
examples:
- |
- stmpe {
- stmpe_adc {
- compatible = "st,stmpe-adc";
- st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
- };
+ adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */
};
...
diff --git a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
index 0144f74a4768..a0a5e5919987 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adf4371.yaml
@@ -53,7 +53,7 @@ unevaluatedProperties: false
examples:
- |
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
index 2c900e9dddc6..052dccbb5eea 100644
--- a/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
+++ b/Documentation/devicetree/bindings/iio/gyroscope/nxp,fxas21002c.yaml
@@ -65,7 +65,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -81,7 +81,7 @@ examples:
interrupt-names = "INT1";
};
};
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
index 6c5ad426a016..12f75ddc4a70 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4403.yaml
@@ -42,7 +42,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- heart_mon@0 {
+ heart-rate@0 {
compatible = "ti,afe4403";
reg = <0>;
spi-max-frequency = <10000000>;
diff --git a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
index c0e815d9999e..b334f3e356ad 100644
--- a/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
+++ b/Documentation/devicetree/bindings/iio/health/ti,afe4404.yaml
@@ -39,7 +39,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- heart_mon@58 {
+ heart-rate@58 {
compatible = "ti,afe4404";
reg = <0x58>;
tx-supply = <&vbat>;
diff --git a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
index 2247481d0203..0103f4238942 100644
--- a/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/dht11.yaml
@@ -34,7 +34,7 @@ additionalProperties: false
examples:
- |
- humidity_sensor {
+ humidity-sensor {
compatible = "dht11";
gpios = <&gpio0 6 0>;
};
diff --git a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
index 88384b69f917..a36173b0c654 100644
--- a/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
+++ b/Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
@@ -35,7 +35,7 @@ additionalProperties: false
examples:
- |
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
index d166dbca18c3..4e43c80e5119 100644
--- a/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/adi,adis16460.yaml
@@ -42,7 +42,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
index 13c9abdd3131..3ecfb3f086bc 100644
--- a/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/invensense,icm42600.yaml
@@ -65,7 +65,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -81,7 +81,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
index 24416b59b782..db6a145840f7 100644
--- a/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
+++ b/Documentation/devicetree/bindings/iio/imu/nxp,fxos8700.yaml
@@ -49,7 +49,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -65,7 +65,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- spi0 {
+ spi {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
index 1f9fe15b4b3c..9fb8d773efa3 100644
--- a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -39,7 +39,7 @@ examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
index 72cd2c2d3f17..256f537840e4 100644
--- a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -60,7 +60,7 @@ examples:
- |
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
- i2c0 {
+ i2c {
#address-cells = <1>;
#size-cells = <0>;
pressure@77 {
diff --git a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
index a2823ed6867b..66394e17fcc8 100644
--- a/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/maxim,max31865.yaml
@@ -43,7 +43,7 @@ examples:
#address-cells = <1>;
#size-cells = <0>;
- temp_sensor@0 {
+ temperature-sensor@0 {
compatible = "maxim,max31865";
reg = <0>;
spi-max-frequency = <400000>;
--
2.34.1
next prev parent reply other threads:[~2023-01-18 18:44 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-18 18:44 [PATCH 1/5] dt-bindings: iio: drop unneeded quotes Krzysztof Kozlowski
2023-01-18 18:44 ` [PATCH 2/5] dt-bindings: iio: minor whitespace cleanups Krzysztof Kozlowski
2023-01-23 20:21 ` Rob Herring
2023-01-18 18:44 ` Krzysztof Kozlowski [this message]
2023-01-21 17:17 ` [PATCH 3/5] dt-bindings: iio: correct node names in examples Jonathan Cameron
2023-01-21 18:31 ` Krzysztof Kozlowski
2023-01-22 17:01 ` Jonathan Cameron
2023-01-23 20:33 ` Rob Herring
2023-01-24 7:40 ` Krzysztof Kozlowski
2023-01-23 20:36 ` Rob Herring
2023-01-18 18:44 ` [PATCH 4/5] dt-bindings: iio: use lowercase hex " Krzysztof Kozlowski
2023-01-23 20:35 ` Rob Herring
2023-01-18 18:44 ` [PATCH 5/5] dt-bindings: iio: cleanup examples - indentation Krzysztof Kozlowski
2023-01-20 19:03 ` Alexandru Lazar
2023-01-23 20:47 ` Rob Herring
2023-01-19 20:14 ` [PATCH 1/5] dt-bindings: iio: drop unneeded quotes Dmitry Rokosov
2023-01-20 8:31 ` Claudiu.Beznea
2023-01-20 22:05 ` Puranjay Mohan
2023-01-23 20:21 ` Rob Herring
2023-01-24 1:54 ` Marcelo Schmitt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230118184413.395820-3-krzysztof.kozlowski@linaro.org \
--to=krzysztof.kozlowski@linaro.org \
--cc=Michael.Hennerich@analog.com \
--cc=ak@it-klinger.de \
--cc=alazar@startmail.com \
--cc=alexandre.belloni@bootlin.com \
--cc=alexandre.torgue@foss.st.com \
--cc=alexandru.tachici@analog.com \
--cc=alim.akhtar@samsung.com \
--cc=bleung@chromium.org \
--cc=caleb.connolly@linaro.org \
--cc=chrome-platform@lists.linux.dev \
--cc=claudiu.beznea@microchip.com \
--cc=contact@artur-rojek.eu \
--cc=daniel.baluta@nxp.com \
--cc=ddrokosov@sberdevices.ru \
--cc=decatf@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dragos.bogdan@analog.com \
--cc=eugen.hristev@microchip.com \
--cc=ez@norophonic.com \
--cc=fabrice.gasnier@foss.st.com \
--cc=groeck@chromium.org \
--cc=harald@ccbib.org \
--cc=jic23@kernel.org \
--cc=jmaneyrol@invensense.com \
--cc=kent@minoris.se \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-fbdev@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=linux@rempel-privat.de \
--cc=lorenzo@kernel.org \
--cc=lucas.p.stankus@gmail.com \
--cc=marcelo.schmitt1@gmail.com \
--cc=marcus.folkesson@gmail.com \
--cc=matt.ranostay@konsulko.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=miquel.raynal@bootlin.com \
--cc=navin@linumiz.com \
--cc=nicolas.ferre@microchip.com \
--cc=nish.malpani25@gmail.com \
--cc=nuno.sa@analog.com \
--cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
--cc=preid@electromag.com.au \
--cc=puranjay12@gmail.com \
--cc=renatogeh@gmail.com \
--cc=rmfrfs@gmail.com \
--cc=robh+dt@kernel.org \
--cc=sean@geanix.com \
--cc=stefan.popa@analog.com \
--cc=stefan@agner.ch \
--cc=swboyd@chromium.org \
--cc=tremyfr@yahoo.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.