From: Durai Manickam KR <durai.manickamkr@microchip.com> To: <Hari.PrasathGE@microchip.com>, <balamanikandan.gunasundar@microchip.com>, <manikandan.m@microchip.com>, <varshini.rajendran@microchip.com>, <dharma.b@microchip.com>, <nayabbasha.sayed@microchip.com>, <balakrishnan.s@microchip.com>, <claudiu.beznea@microchip.com>, <cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>, <krzysztof.kozlowski@linaro.org>, <alexandre.belloni@bootlin.com>, <davem@davemloft.net>, <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <Kavyasree.Kotagiri@microchip.com>, <Horatiu.Vultur@microchip.com>, <robh+dt@kernel.org>, <andrew@lunn.ch>, <michael@walle.cc>, <jerry.ray@microchip.com> Cc: Durai Manickam KR <durai.manickamkr@microchip.com> Subject: [PATCH v5 0/8] Add support for sam9x60 curiosity board Date: Fri, 3 Feb 2023 09:18:25 +0530 [thread overview] Message-ID: <20230203034833.451461-1-durai.manickamkr@microchip.com> (raw) This series of patches is meant to address the following: - Moving of flexcom definitions from board file to SoC file and some minor changes to its properties. - Add support for the new sam9x60 curiosity board based on the existing sam9x60 SoC. Changes in v5: -------------- All the patches are accepted except the below patches which are updated based on the comments receied on PATCH v4, - [PATCH v4 2/8] Updated from field and first SOB as same author. - [PATCH v4 2/8] Added the missing compatibles for the UART. - [PATCH v4 8/8] Fixed the dtb warnings. Changes in v4: -------------- - Added the missed property atmel,usart-mode in uart5 - Renamed the led label. Changes in v3: -------------- - Updated commit logs mentioning each author's contribution. - Author name is updated based on the linux mainline guidelines. - updated the description file such that sam9x60 curiosity is added together with sam9x60ek as an enum. - Updated the entries in the regulator container alphabetically sorted. - Added label name and node name following the guidelines. Changes in v2: -------------- - Added generic names for regulator node. - Removed the #addredd-cells and #size-cells property which shows compilation warning. - Removed the property "status=okay" as this is default. - No underscores used for the pinctrl definitions and node names. - Organised the patches in the logical way. - Bindings are made separate patch. Durai Manickam KR (3): ARM: dts: at91: sam9x60: fix spi4 node dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board Manikandan Muralidharan (5): ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Add missing flexcom definitions .../devicetree/bindings/arm/atmel-at91.yaml | 6 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 501 ++++++++++++++ arch/arm/boot/dts/at91-sam9x60ek.dts | 50 +- arch/arm/boot/dts/sam9x60.dtsi | 622 ++++++++++++++++++ 5 files changed, 1138 insertions(+), 42 deletions(-) create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Durai Manickam KR <durai.manickamkr@microchip.com> To: <Hari.PrasathGE@microchip.com>, <balamanikandan.gunasundar@microchip.com>, <manikandan.m@microchip.com>, <varshini.rajendran@microchip.com>, <dharma.b@microchip.com>, <nayabbasha.sayed@microchip.com>, <balakrishnan.s@microchip.com>, <claudiu.beznea@microchip.com>, <cristian.birsan@microchip.com>, <nicolas.ferre@microchip.com>, <krzysztof.kozlowski@linaro.org>, <alexandre.belloni@bootlin.com>, <davem@davemloft.net>, <arnd@arndb.de>, <olof@lixom.net>, <soc@kernel.org>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <Kavyasree.Kotagiri@microchip.com>, <Horatiu.Vultur@microchip.com>, <robh+dt@kernel.org>, <andrew@lunn.ch>, <michael@walle.cc>, <jerry.ray@microchip.com> Cc: Durai Manickam KR <durai.manickamkr@microchip.com> Subject: [PATCH v5 0/8] Add support for sam9x60 curiosity board Date: Fri, 3 Feb 2023 09:18:25 +0530 [thread overview] Message-ID: <20230203034833.451461-1-durai.manickamkr@microchip.com> (raw) This series of patches is meant to address the following: - Moving of flexcom definitions from board file to SoC file and some minor changes to its properties. - Add support for the new sam9x60 curiosity board based on the existing sam9x60 SoC. Changes in v5: -------------- All the patches are accepted except the below patches which are updated based on the comments receied on PATCH v4, - [PATCH v4 2/8] Updated from field and first SOB as same author. - [PATCH v4 2/8] Added the missing compatibles for the UART. - [PATCH v4 8/8] Fixed the dtb warnings. Changes in v4: -------------- - Added the missed property atmel,usart-mode in uart5 - Renamed the led label. Changes in v3: -------------- - Updated commit logs mentioning each author's contribution. - Author name is updated based on the linux mainline guidelines. - updated the description file such that sam9x60 curiosity is added together with sam9x60ek as an enum. - Updated the entries in the regulator container alphabetically sorted. - Added label name and node name following the guidelines. Changes in v2: -------------- - Added generic names for regulator node. - Removed the #addredd-cells and #size-cells property which shows compilation warning. - Removed the property "status=okay" as this is default. - No underscores used for the pinctrl definitions and node names. - Organised the patches in the logical way. - Bindings are made separate patch. Durai Manickam KR (3): ARM: dts: at91: sam9x60: fix spi4 node dt-bindings: arm: at91: Add info on sam9x60 curiosity ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board Manikandan Muralidharan (5): ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions ARM: dts: at91: sam9x60: move flexcom definitions ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes ARM: dts: at91: sam9x60: Add missing flexcom definitions .../devicetree/bindings/arm/atmel-at91.yaml | 6 +- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/at91-sam9x60_curiosity.dts | 501 ++++++++++++++ arch/arm/boot/dts/at91-sam9x60ek.dts | 50 +- arch/arm/boot/dts/sam9x60.dtsi | 622 ++++++++++++++++++ 5 files changed, 1138 insertions(+), 42 deletions(-) create mode 100644 arch/arm/boot/dts/at91-sam9x60_curiosity.dts -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2023-02-03 3:48 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-02-03 3:48 Durai Manickam KR [this message] 2023-02-03 3:48 ` [PATCH v5 0/8] Add support for sam9x60 curiosity board Durai Manickam KR 2023-02-03 3:48 ` [PATCH v5 1/8] ARM: dts: at91: sam9x60: Fix the label numbering for the flexcom functions Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:07 ` Claudiu.Beznea 2023-02-03 12:07 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 2/8] ARM: dts: at91: sam9x60: move flexcom definitions Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 3/8] ARM: dts: at91: sam9x60: fix spi4 node Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 4/8] ARM: dts: at91: sam9x60: Specify the FIFO size for the Flexcom UART Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 5/8] ARM: dts: at91: sam9x60: Add DMA bindings for the flexcom nodes Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 6/8] ARM: dts: at91: sam9x60: Add missing flexcom definitions Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:08 ` Claudiu.Beznea 2023-02-03 12:08 ` Claudiu.Beznea 2023-07-04 15:42 ` Alexander Dahl 2023-07-04 15:42 ` Alexander Dahl 2023-02-03 3:48 ` [PATCH v5 7/8] dt-bindings: arm: at91: Add info on sam9x60 curiosity Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 8:12 ` Krzysztof Kozlowski 2023-02-03 8:12 ` Krzysztof Kozlowski 2023-02-03 12:10 ` Claudiu.Beznea 2023-02-03 12:10 ` Claudiu.Beznea 2023-02-03 3:48 ` [PATCH v5 8/8] ARM: dts: at91: sam9x60_curiosity: Add device tree for sam9x60 curiosity board Durai Manickam KR 2023-02-03 3:48 ` Durai Manickam KR 2023-02-03 12:06 ` Claudiu.Beznea 2023-02-03 12:06 ` Claudiu.Beznea 2023-02-03 12:11 ` Claudiu.Beznea 2023-02-03 12:11 ` Claudiu.Beznea
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230203034833.451461-1-durai.manickamkr@microchip.com \ --to=durai.manickamkr@microchip.com \ --cc=Hari.PrasathGE@microchip.com \ --cc=Horatiu.Vultur@microchip.com \ --cc=Kavyasree.Kotagiri@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=andrew@lunn.ch \ --cc=arnd@arndb.de \ --cc=balakrishnan.s@microchip.com \ --cc=balamanikandan.gunasundar@microchip.com \ --cc=claudiu.beznea@microchip.com \ --cc=cristian.birsan@microchip.com \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=dharma.b@microchip.com \ --cc=jerry.ray@microchip.com \ --cc=krzysztof.kozlowski@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=manikandan.m@microchip.com \ --cc=michael@walle.cc \ --cc=nayabbasha.sayed@microchip.com \ --cc=nicolas.ferre@microchip.com \ --cc=olof@lixom.net \ --cc=robh+dt@kernel.org \ --cc=soc@kernel.org \ --cc=varshini.rajendran@microchip.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.