[PATCH V3 1/2] usb: gadget: u_ether: Convert prints to device prints

From: Jon Hunter <jonathanh@nvidia.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <linux-usb@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-tegra@vger.kernel.org>,
	Andrzej Pietrasiewicz <andrzej.p@collabora.com>,
	Jon Hunter <jonathanh@nvidia.com>
Subject: [PATCH V3 1/2] usb: gadget: u_ether: Convert prints to device prints
Date: Thu, 9 Feb 2023 12:53:18 +0000	[thread overview]
Message-ID: <20230209125319.18589-1-jonathanh@nvidia.com> (raw)

The USB ethernet gadget driver implements its own print macros which
call printk. Device drivers should use the device prints that print the
device name. Fortunately, the same macro names are defined in the header
file 'linux/usb/composite.h' and these use the device prints. Therefore,
remove the local definitions in the USB ethernet gadget driver and use
those in 'linux/usb/composite.h'. The only difference is that now the
device name is printed instead of the ethernet interface name.

Tested using ethernet gadget on Jetson AGX Orin.

Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
---
V3: Added this patch and dropped the patch in V2 that improved some of
    the prints.

 drivers/usb/gadget/function/u_ether.c | 36 +--------------------------
 1 file changed, 1 insertion(+), 35 deletions(-)

diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c
index 8f12f3f8f6ee..740331882e8d 100644
--- a/drivers/usb/gadget/function/u_ether.c
+++ b/drivers/usb/gadget/function/u_ether.c
@@ -17,6 +17,7 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/if_vlan.h>
+#include <linux/usb/composite.h>
 
 #include "u_ether.h"
 
@@ -103,41 +104,6 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult)
 
 /*-------------------------------------------------------------------------*/
 
-/* REVISIT there must be a better way than having two sets
- * of debug calls ...
- */
-
-#undef DBG
-#undef VDBG
-#undef ERROR
-#undef INFO
-
-#define xprintk(d, level, fmt, args...) \
-	printk(level "%s: " fmt , (d)->net->name , ## args)
-
-#ifdef DEBUG
-#undef DEBUG
-#define DBG(dev, fmt, args...) \
-	xprintk(dev , KERN_DEBUG , fmt , ## args)
-#else
-#define DBG(dev, fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-
-#ifdef VERBOSE_DEBUG
-#define VDBG	DBG
-#else
-#define VDBG(dev, fmt, args...) \
-	do { } while (0)
-#endif /* DEBUG */
-
-#define ERROR(dev, fmt, args...) \
-	xprintk(dev , KERN_ERR , fmt , ## args)
-#define INFO(dev, fmt, args...) \
-	xprintk(dev , KERN_INFO , fmt , ## args)
-
-/*-------------------------------------------------------------------------*/
-
 /* NETWORK DRIVER HOOKUP (to the layer above this driver) */
 
 static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
-- 
2.34.1

