[PATCH v12 12/19] PCI: dwc: Add EDMA_UNROLL capability flag

[Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>]

One of PCIe controllers have an unexpected register value on
the dbi+0x97b register. So, add a new capability flag "EDMA_UNROLL"
which would force the unrolled eDMA mapping for the problematic
device, as suggested by Serge Semin.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
---
 drivers/pci/controller/dwc/pcie-designware.c | 8 +++++++-
 drivers/pci/controller/dwc/pcie-designware.h | 5 +++--
 2 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-designware.c b/drivers/pci/controller/dwc/pcie-designware.c
index 2413cd39310c..feb6ab9d4944 100644
--- a/drivers/pci/controller/dwc/pcie-designware.c
+++ b/drivers/pci/controller/dwc/pcie-designware.c
@@ -920,8 +920,14 @@ static int dw_pcie_edma_find_chip(struct dw_pcie *pci)
 	 * Indirect eDMA CSRs access has been completely removed since v5.40a
 	 * thus no space is now reserved for the eDMA channels viewport and
 	 * former DMA CTRL register is no longer fixed to FFs.
+	 *
+	 * Note some devices for unknown reason may have zeros in the eDMA CTRL
+	 * register even though the HW-manual explicitly states there must FFs
+	 * if the unrolled mapping is enabled. For such cases the low-level
+	 * drivers are supposed to manually activate the unrolled mapping to
+	 * bypass the auto-detection procedure.
 	 */
-	if (dw_pcie_ver_is_ge(pci, 540A))
+	if (dw_pcie_ver_is_ge(pci, 540A) || dw_pcie_cap_is(pci, EDMA_UNROLL))
 		val = 0xFFFFFFFF;
 	else
 		val = dw_pcie_readl_dbi(pci, PCIE_DMA_VIEWPORT_BASE + PCIE_DMA_CTRL);
diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
index 5ec046744bb6..c4190bb7984f 100644
--- a/drivers/pci/controller/dwc/pcie-designware.h
+++ b/drivers/pci/controller/dwc/pcie-designware.h
@@ -54,8 +54,9 @@
 
 /* DWC PCIe controller capabilities */
 #define DW_PCIE_CAP_REQ_RES		0
-#define DW_PCIE_CAP_IATU_UNROLL		1
-#define DW_PCIE_CAP_CDM_CHECK		2
+#define DW_PCIE_CAP_EDMA_UNROLL		1
+#define DW_PCIE_CAP_IATU_UNROLL		2
+#define DW_PCIE_CAP_CDM_CHECK		3
 
 #define dw_pcie_cap_is(_pci, _cap) \
 	test_bit(DW_PCIE_CAP_ ## _cap, &(_pci)->caps)
-- 
2.25.1