From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de>, linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings Date: Tue, 23 May 2023 17:06:19 +0300 [thread overview] Message-ID: <20230523140622.265692-9-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230523140622.265692-1-dmitry.baryshkov@linaro.org> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2273fa571988..628f3cead829 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2018,7 +2018,7 @@ ufs_mem_hc: ufshc@1d84000 { <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2063,10 +2063,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8150-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2076,16 +2074,10 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { -- 2.39.2 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Vinod Koul <vkoul@kernel.org>, Kishon Vijay Abraham I <kishon@kernel.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: Philipp Zabel <p.zabel@pengutronix.de>, linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH v3 08/11] arm64: dts: qcom: sm8150: switch UFS QMP PHY to new style of bindings Date: Tue, 23 May 2023 17:06:19 +0300 [thread overview] Message-ID: <20230523140622.265692-9-dmitry.baryshkov@linaro.org> (raw) In-Reply-To: <20230523140622.265692-1-dmitry.baryshkov@linaro.org> Change the UFS QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- arch/arm64/boot/dts/qcom/sm8150.dtsi | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 2273fa571988..628f3cead829 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -2018,7 +2018,7 @@ ufs_mem_hc: ufshc@1d84000 { <0 0x01d90000 0 0x8000>; reg-names = "std", "ice"; interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>; - phys = <&ufs_mem_phy_lanes>; + phys = <&ufs_mem_phy>; phy-names = "ufsphy"; lanes-per-direction = <2>; #reset-cells = <1>; @@ -2063,10 +2063,8 @@ ufs_mem_hc: ufshc@1d84000 { ufs_mem_phy: phy@1d87000 { compatible = "qcom,sm8150-qmp-ufs-phy"; - reg = <0 0x01d87000 0 0x1c0>; - #address-cells = <2>; - #size-cells = <2>; - ranges; + reg = <0 0x01d87000 0 0x1000>; + clock-names = "ref", "ref_aux"; clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>, @@ -2076,16 +2074,10 @@ ufs_mem_phy: phy@1d87000 { resets = <&ufs_mem_hc 0>; reset-names = "ufsphy"; - status = "disabled"; - ufs_mem_phy_lanes: phy@1d87400 { - reg = <0 0x01d87400 0 0x16c>, - <0 0x01d87600 0 0x200>, - <0 0x01d87c00 0 0x200>, - <0 0x01d87800 0 0x16c>, - <0 0x01d87a00 0 0x200>; - #phy-cells = <0>; - }; + #phy-cells = <0>; + + status = "disabled"; }; tcsr_mutex: hwlock@1f40000 { -- 2.39.2
next prev parent reply other threads:[~2023-05-23 14:07 UTC|newest] Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-05-23 14:06 [PATCH v3 00/11] phy: qcom-qmp-ufs: convert to newer style of bindings Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 01/11] dt-bindings: phy: migrate QMP UFS PHY bindings to qcom,sc8280xp-qmp-ufs-phy.yaml Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-06-25 15:57 ` Krzysztof Kozlowski 2023-06-25 15:57 ` Krzysztof Kozlowski 2023-07-11 4:59 ` Vinod Koul 2023-07-11 4:59 ` Vinod Koul 2023-05-23 14:06 ` [PATCH v3 02/11] phy: qcom-qmp-ufs: populate offsets configuration Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-06-13 22:15 ` Bjorn Andersson 2023-06-13 22:15 ` Bjorn Andersson 2023-05-23 14:06 ` [PATCH v3 03/11] arm64: dts: qcom: msm8996: switch UFS QMP PHY to new style of bindings Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 04/11] arm64: dts: qcom: msm8998: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 17:34 ` Konrad Dybcio 2023-05-23 17:34 ` Konrad Dybcio 2023-05-23 14:06 ` [PATCH v3 05/11] arm64: dts: qcom: sdm845: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 17:34 ` Konrad Dybcio 2023-05-23 17:34 ` Konrad Dybcio 2023-05-23 14:06 ` [PATCH v3 06/11] arm64: dts: qcom: sm6115: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 07/11] arm64: dts: qcom: sm6350: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov [this message] 2023-05-23 14:06 ` [PATCH v3 08/11] arm64: dts: qcom: sm8150: " Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 09/11] arm64: dts: qcom: sm8250: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 10/11] arm64: dts: qcom: sm8350: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-05-23 14:06 ` [PATCH v3 11/11] arm64: dts: qcom: sm8450: " Dmitry Baryshkov 2023-05-23 14:06 ` Dmitry Baryshkov 2023-07-12 5:01 ` (subset) [PATCH v3 00/11] phy: qcom-qmp-ufs: convert to newer " Vinod Koul 2023-07-12 5:01 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20230523140622.265692-9-dmitry.baryshkov@linaro.org \ --to=dmitry.baryshkov@linaro.org \ --cc=agross@kernel.org \ --cc=andersson@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=kishon@kernel.org \ --cc=konrad.dybcio@linaro.org \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-phy@lists.infradead.org \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.