All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alain Volmat <alain.volmat@foss.st.com>
To: Alain Volmat <alain.volmat@foss.st.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Kieran Bingham <kieran.bingham@ideasonboard.com>,
	Rob Herring <robh@kernel.org>, <linux-media@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH v2 2/3] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings
Date: Wed, 11 Oct 2023 19:57:29 +0200	[thread overview]
Message-ID: <20231011175735.1824782-3-alain.volmat@foss.st.com> (raw)
In-Reply-To: <20231011175735.1824782-1-alain.volmat@foss.st.com>

Introduction of the Galaxy Core GC2145 XVGA CMOS camera sensor.

Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
---
 .../bindings/media/i2c/galaxycore,gc2145.yaml | 104 ++++++++++++++++++
 1 file changed, 104 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
new file mode 100644
index 000000000000..94d194cf5452
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/galaxycore,gc2145.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/galaxycore,gc2145.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Galaxy Core 1/5'' UXGA CMOS Image Sensor
+
+maintainers:
+  - Alain Volmat <alain.volmat@foss.st.com>
+
+description:
+  The Galaxy Core GC2145 is a high quality 2 Mega CMOS image sensor, for mobile
+  phone camera applications and digital camera products. GC2145 incorporates a
+  1616V x 1232H active pixel array, on-chip 10-bit ADC, and image signal
+  processor. It is programmable through an I2C interface. Image data is sent
+  either through a parallel interface or through MIPI CSI-2.
+
+allOf:
+  - $ref: ../video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: galaxycore,gc2145
+
+  reg:
+    const: 0x3c
+
+  clocks:
+    maxItems: 1
+
+  powerdown-gpios:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  iovdd-supply:
+    description: Power Supply for I/O circuits (1.7 - 3V).
+
+  avdd-supply:
+    description: Power for analog circuit/sensor array (2.7 - 3V).
+
+  dvdd-supply:
+    description: Power for digital core (1.7 - 1.9V).
+
+  orientation: true
+
+  rotation: true
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+    required:
+      - endpoint
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - powerdown-gpios
+  - reset-gpios
+  - iovdd-supply
+  - avdd-supply
+  - dvdd-supply
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@3c {
+            compatible = "galaxycore,gc2145";
+            reg = <0x3c>;
+            clocks = <&clk_ext_camera>;
+            iovdd-supply = <&scmi_v3v3_sw>;
+            avdd-supply = <&scmi_v3v3_sw>;
+            dvdd-supply = <&scmi_v3v3_sw>;
+            powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+            reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>;
+
+            port {
+                endpoint {
+                    remote-endpoint = <&mipid02_0>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
+
+...
-- 
2.25.1


  parent reply	other threads:[~2023-10-11 17:58 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-11 17:57 [PATCH v2 0/3] media: i2c: gc2145: GC2145 sensor support Alain Volmat
2023-10-11 17:57 ` [PATCH v2 1/3] dt-bindings: vendor-prefixes: Add prefix for GalaxyCore Inc Alain Volmat
2023-10-12 18:02   ` Krzysztof Kozlowski
2023-10-11 17:57 ` Alain Volmat [this message]
2023-10-12 17:15   ` [PATCH v2 2/3] dt-bindings: media: i2c: add galaxycore,gc2145 dt-bindings Conor Dooley
2023-11-01 13:23   ` Sakari Ailus
2023-11-06 16:50     ` Alain Volmat
2023-10-11 17:57 ` [PATCH v2 3/3] media: i2c: gc2145: Galaxy Core GC2145 sensor support Alain Volmat
2023-10-23  8:38   ` Jacopo Mondi
2023-10-30 16:37     ` Alain Volmat
2023-10-31  8:05       ` Jacopo Mondi
2023-11-06  9:55         ` Alain Volmat
2023-11-06 10:48           ` Sakari Ailus

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231011175735.1824782-3-alain.volmat@foss.st.com \
    --to=alain.volmat@foss.st.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=mchehab@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.