From: Andre Przywara <andre.przywara@arm.com> To: Vasily Khoruzhick <anarsoul@gmail.com>, Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Samuel Holland <samuel@sholland.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Zhang Rui <rui.zhang@intel.com>, Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Martin Botka <martin.botka@somainline.org>, Bob McChesney <bob@electricworry.net>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v3 6/6] arm64: dts: allwinner: h616: Add thermal sensor and zones Date: Tue, 28 Nov 2023 00:58:49 +0000 [thread overview] Message-ID: <20231128005849.19044-7-andre.przywara@arm.com> (raw) In-Reply-To: <20231128005849.19044-1-andre.przywara@arm.com> From: Martin Botka <martin.botka@somainline.org> There are four thermal sensors: - CPU - GPU - VE - DRAM Add the thermal sensor configuration and the thermal zones. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index d549d277d9729..94764f2bd375b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun50i-h616-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -138,6 +139,10 @@ sid: efuse@3006000 { reg = <0x03006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -511,6 +516,19 @@ mdio0: mdio { }; }; + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h616-ths"; + reg = <0x05070400 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + syscon = <&syscon>; + #thermal-sensor-cells = <1>; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb"; @@ -755,4 +773,74 @@ r_rsb: rsb@7083000 { #size-cells = <0>; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 2>; + sustainable-power = <1000>; + + trips { + cpu_threshold: cpu-trip-0 { + temperature = <60000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_target: cpu-trip-1 { + temperature = <70000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_critical: cpu-trip-2 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + sustainable-power = <1100>; + + trips { + gpu_temp_critical: gpu-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ve-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + ve_temp_critical: ve-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 3>; + + trips { + ddr_temp_critical: ddr-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + }; }; -- 2.35.8
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: Vasily Khoruzhick <anarsoul@gmail.com>, Yangtao Li <tiny.windzz@gmail.com>, Chen-Yu Tsai <wens@csie.org>, Jernej Skrabec <jernej.skrabec@gmail.com>, Samuel Holland <samuel@sholland.org> Cc: "Rafael J . Wysocki" <rafael@kernel.org>, Daniel Lezcano <daniel.lezcano@linaro.org>, Zhang Rui <rui.zhang@intel.com>, Lukasz Luba <lukasz.luba@arm.com>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>, Conor Dooley <conor+dt@kernel.org>, Martin Botka <martin.botka@somainline.org>, Bob McChesney <bob@electricworry.net>, linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-sunxi@lists.linux.dev Subject: [PATCH v3 6/6] arm64: dts: allwinner: h616: Add thermal sensor and zones Date: Tue, 28 Nov 2023 00:58:49 +0000 [thread overview] Message-ID: <20231128005849.19044-7-andre.przywara@arm.com> (raw) In-Reply-To: <20231128005849.19044-1-andre.przywara@arm.com> From: Martin Botka <martin.botka@somainline.org> There are four thermal sensors: - CPU - GPU - VE - DRAM Add the thermal sensor configuration and the thermal zones. Signed-off-by: Martin Botka <martin.botka@somainline.org> Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 88 +++++++++++++++++++ 1 file changed, 88 insertions(+) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi index d549d277d9729..94764f2bd375b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi @@ -9,6 +9,7 @@ #include <dt-bindings/clock/sun6i-rtc.h> #include <dt-bindings/reset/sun50i-h616-ccu.h> #include <dt-bindings/reset/sun50i-h6-r-ccu.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>; @@ -138,6 +139,10 @@ sid: efuse@3006000 { reg = <0x03006000 0x1000>; #address-cells = <1>; #size-cells = <1>; + + ths_calibration: thermal-sensor-calibration@14 { + reg = <0x14 0x8>; + }; }; watchdog: watchdog@30090a0 { @@ -511,6 +516,19 @@ mdio0: mdio { }; }; + ths: thermal-sensor@5070400 { + compatible = "allwinner,sun50i-h616-ths"; + reg = <0x05070400 0x400>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_THS>; + clock-names = "bus"; + resets = <&ccu RST_BUS_THS>; + nvmem-cells = <&ths_calibration>; + nvmem-cell-names = "calibration"; + syscon = <&syscon>; + #thermal-sensor-cells = <1>; + }; + usbotg: usb@5100000 { compatible = "allwinner,sun50i-h616-musb", "allwinner,sun8i-h3-musb"; @@ -755,4 +773,74 @@ r_rsb: rsb@7083000 { #size-cells = <0>; }; }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 2>; + sustainable-power = <1000>; + + trips { + cpu_threshold: cpu-trip-0 { + temperature = <60000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_target: cpu-trip-1 { + temperature = <70000>; + type = "passive"; + hysteresis = <0>; + }; + cpu_critical: cpu-trip-2 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + gpu-thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + thermal-sensors = <&ths 0>; + sustainable-power = <1100>; + + trips { + gpu_temp_critical: gpu-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ve-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 1>; + + trips { + ve_temp_critical: ve-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + + ddr-thermal { + polling-delay-passive = <0>; + polling-delay = <0>; + thermal-sensors = <&ths 3>; + + trips { + ddr_temp_critical: ddr-trip-0 { + temperature = <110000>; + type = "critical"; + hysteresis = <0>; + }; + }; + }; + }; }; -- 2.35.8 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-28 1:00 UTC|newest] Thread overview: 56+ messages / expand[flat|nested] mbox.gz Atom feed top 2023-11-28 0:58 [PATCH v3 0/6] Add support for H616 Thermal system Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-11-28 0:58 ` [PATCH v3 1/6] soc: sunxi: sram: export register 0 for THS on H616 Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-11-28 0:58 ` [PATCH v3 2/6] dt-bindings: thermal: sun8i: Add H616 THS controller Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-11-28 7:41 ` Krzysztof Kozlowski 2023-11-28 7:41 ` Krzysztof Kozlowski 2023-11-28 0:58 ` [PATCH v3 3/6] thermal: sun8i: explain unknown H6 register value Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-11-28 0:58 ` [PATCH v3 4/6] thermal: sun8i: add syscon register access code Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-11-28 7:43 ` Krzysztof Kozlowski 2023-11-28 7:43 ` Krzysztof Kozlowski 2023-11-28 7:50 ` Chen-Yu Tsai 2023-11-28 7:50 ` Chen-Yu Tsai 2023-11-28 8:29 ` Krzysztof Kozlowski 2023-11-28 8:29 ` Krzysztof Kozlowski 2023-11-28 8:59 ` Chen-Yu Tsai 2023-11-28 8:59 ` Chen-Yu Tsai 2023-11-28 9:02 ` Chen-Yu Tsai 2023-11-28 9:02 ` Chen-Yu Tsai 2023-11-28 9:09 ` Chen-Yu Tsai 2023-11-28 9:09 ` Chen-Yu Tsai 2023-11-28 9:13 ` Krzysztof Kozlowski 2023-11-28 9:13 ` Krzysztof Kozlowski 2023-11-28 14:11 ` Krzysztof Kozlowski 2023-11-28 14:11 ` Krzysztof Kozlowski 2023-11-28 14:33 ` Andre Przywara 2023-11-28 14:33 ` Andre Przywara 2023-11-28 14:48 ` Krzysztof Kozlowski 2023-11-28 14:48 ` Krzysztof Kozlowski 2023-11-28 16:10 ` Andre Przywara 2023-11-28 16:10 ` Andre Przywara 2023-11-28 16:39 ` Chen-Yu Tsai 2023-11-28 16:39 ` Chen-Yu Tsai 2023-11-28 16:50 ` Rob Herring 2023-11-28 16:50 ` Rob Herring 2023-11-29 17:03 ` Andre Przywara 2023-11-29 17:03 ` Andre Przywara 2023-11-29 17:09 ` Chen-Yu Tsai 2023-11-29 17:09 ` Chen-Yu Tsai 2023-11-28 0:58 ` [PATCH v3 5/6] thermal: sun8i: add support for H616 THS controller Andre Przywara 2023-11-28 0:58 ` Andre Przywara 2023-12-09 10:44 ` Maksim Kiselev 2023-12-09 10:44 ` Maksim Kiselev 2023-12-11 0:05 ` Andre Przywara 2023-12-11 0:05 ` Andre Przywara 2023-12-12 18:09 ` Maxim Kiselev 2023-12-12 18:09 ` Maxim Kiselev 2023-12-14 9:59 ` Andre Przywara 2023-12-14 9:59 ` Andre Przywara 2023-12-17 14:16 ` Maxim Kiselev 2023-12-17 14:16 ` Maxim Kiselev 2023-11-28 0:58 ` Andre Przywara [this message] 2023-11-28 0:58 ` [PATCH v3 6/6] arm64: dts: allwinner: h616: Add thermal sensor and zones Andre Przywara
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20231128005849.19044-7-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=anarsoul@gmail.com \ --cc=bob@electricworry.net \ --cc=conor+dt@kernel.org \ --cc=daniel.lezcano@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=jernej.skrabec@gmail.com \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ --cc=linux-sunxi@lists.linux.dev \ --cc=lukasz.luba@arm.com \ --cc=martin.botka@somainline.org \ --cc=rafael@kernel.org \ --cc=robh+dt@kernel.org \ --cc=rui.zhang@intel.com \ --cc=samuel@sholland.org \ --cc=tiny.windzz@gmail.com \ --cc=wens@csie.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.