All of lore.kernel.org
 help / color / mirror / Atom feed
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Tom Joseph" <tjoseph@cadence.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH 13/14] PCI: j721e: move reset GPIO to device struct
Date: Mon, 15 Jan 2024 17:14:54 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v1-13-84e55da52400@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v1-0-84e55da52400@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Move reset GPIO to device struct, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 9b343a46da11..477275d72257 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc, true);

-- 
2.39.2


WARNING: multiple messages have this Message-ID (diff)
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Tom Joseph" <tjoseph@cadence.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH 13/14] PCI: j721e: move reset GPIO to device struct
Date: Mon, 15 Jan 2024 17:14:54 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v1-13-84e55da52400@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v1-0-84e55da52400@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Move reset GPIO to device struct, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 9b343a46da11..477275d72257 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc, true);

-- 
2.39.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Thomas Richard <thomas.richard@bootlin.com>
To: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <brgl@bgdev.pl>,
	"Andy Shevchenko" <andy@kernel.org>,
	"Tony Lindgren" <tony@atomide.com>,
	"Haojian Zhuang" <haojian.zhuang@linaro.org>,
	"Vignesh R" <vigneshr@ti.com>,
	"Aaro Koskinen" <aaro.koskinen@iki.fi>,
	"Janusz Krzysztofik" <jmkrzyszt@gmail.com>,
	"Andi Shyti" <andi.shyti@kernel.org>,
	"Peter Rosin" <peda@axentia.se>, "Vinod Koul" <vkoul@kernel.org>,
	"Kishon Vijay Abraham I" <kishon@kernel.org>,
	"Philipp Zabel" <p.zabel@pengutronix.de>,
	"Tom Joseph" <tjoseph@cadence.com>,
	"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
	"Krzysztof Wilczyński" <kw@linux.com>,
	"Rob Herring" <robh@kernel.org>,
	"Bjorn Helgaas" <bhelgaas@google.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
	 linux-arm-kernel@lists.infradead.org,
	linux-omap@vger.kernel.org,  linux-i2c@vger.kernel.org,
	linux-phy@lists.infradead.org,  linux-pci@vger.kernel.org,
	gregory.clement@bootlin.com,  theo.lebrun@bootlin.com,
	thomas.petazzoni@bootlin.com, u-kumar1@ti.com,
	 Thomas Richard <thomas.richard@bootlin.com>
Subject: [PATCH 13/14] PCI: j721e: move reset GPIO to device struct
Date: Mon, 15 Jan 2024 17:14:54 +0100	[thread overview]
Message-ID: <20240102-j7200-pcie-s2r-v1-13-84e55da52400@bootlin.com> (raw)
In-Reply-To: <20240102-j7200-pcie-s2r-v1-0-84e55da52400@bootlin.com>

From: Théo Lebrun <theo.lebrun@bootlin.com>

Move reset GPIO to device struct, so it can be used at suspend and
resume stages.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Thomas Richard <thomas.richard@bootlin.com>
---
 drivers/pci/controller/cadence/pci-j721e.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 9b343a46da11..477275d72257 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -54,6 +54,7 @@ struct j721e_pcie {
 	struct clk		*refclk;
 	u32			mode;
 	u32			num_lanes;
+	struct gpio_desc	*reset_gpio;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
 	u32			linkdown_irq_regfield;
@@ -359,7 +360,6 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 	struct j721e_pcie *pcie;
 	struct cdns_pcie_rc *rc = NULL;
 	struct cdns_pcie_ep *ep = NULL;
-	struct gpio_desc *gpiod;
 	void __iomem *base;
 	struct clk *clk;
 	u32 num_lanes;
@@ -468,9 +468,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	switch (mode) {
 	case PCI_MODE_RC:
-		gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
-		if (IS_ERR(gpiod)) {
-			ret = PTR_ERR(gpiod);
+		pcie->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+		if (IS_ERR(pcie->reset_gpio)) {
+			ret = PTR_ERR(pcie->reset_gpio);
 			if (ret != -EPROBE_DEFER)
 				dev_err(dev, "Failed to get reset GPIO\n");
 			goto err_get_sync;
@@ -504,9 +504,9 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		 * mode is selected while enabling the PHY. So deassert PERST#
 		 * after 100 us.
 		 */
-		if (gpiod) {
+		if (pcie->reset_gpio) {
 			usleep_range(100, 200);
-			gpiod_set_value_cansleep(gpiod, 1);
+			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}
 
 		ret = cdns_pcie_host_setup(rc, true);

-- 
2.39.2


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

  parent reply	other threads:[~2024-01-15 16:16 UTC|newest]

Thread overview: 144+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-15 16:14 [PATCH 00/14] Add suspend to ram support for PCIe on J7200 Thomas Richard
2024-01-15 16:14 ` Thomas Richard
2024-01-15 16:14 ` Thomas Richard
2024-01-15 16:14 ` [PATCH 01/14] gpio: pca953x: move suspend/resume to suspend_noirq/resume_noirq Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 19:56   ` Andy Shevchenko
2024-01-15 19:56     ` Andy Shevchenko
2024-01-15 19:56     ` Andy Shevchenko
2024-01-19 15:50     ` Thomas Richard
2024-01-19 15:50       ` Thomas Richard
2024-01-19 15:50       ` Thomas Richard
2024-01-16  7:43   ` Tony Lindgren
2024-01-16  7:43     ` Tony Lindgren
2024-01-16  7:43     ` Tony Lindgren
2024-01-19 17:01     ` Thomas Richard
2024-01-19 17:01       ` Thomas Richard
2024-01-19 17:01       ` Thomas Richard
2024-01-28  0:12       ` Linus Walleij
2024-01-28  0:12         ` Linus Walleij
2024-01-28  0:12         ` Linus Walleij
2024-02-08 16:19         ` Thomas Richard
2024-02-08 16:19           ` Thomas Richard
2024-02-08 16:19           ` Thomas Richard
2024-02-08 16:53           ` Bartosz Golaszewski
2024-02-08 16:53             ` Bartosz Golaszewski
2024-02-08 16:53             ` Bartosz Golaszewski
2024-02-08 21:29           ` Linus Walleij
2024-02-08 21:29             ` Linus Walleij
2024-02-08 21:29             ` Linus Walleij
2024-02-09  7:44             ` Thomas Richard
2024-02-09  7:44               ` Thomas Richard
2024-02-09  7:44               ` Thomas Richard
2024-02-09 10:50               ` Linus Walleij
2024-02-09 10:50                 ` Linus Walleij
2024-02-09 10:50                 ` Linus Walleij
2024-01-15 16:14 ` [PATCH 02/14] pinctrl: pinctrl-single: " Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 20:02   ` Andy Shevchenko
2024-01-15 20:02     ` Andy Shevchenko
2024-01-15 20:02     ` Andy Shevchenko
2024-01-19 16:08     ` Thomas Richard
2024-01-19 16:08       ` Thomas Richard
2024-01-19 16:08       ` Thomas Richard
2024-01-19 16:11       ` Andy Shevchenko
2024-01-19 16:11         ` Andy Shevchenko
2024-01-19 16:11         ` Andy Shevchenko
2024-01-22 14:33         ` Thomas Richard
2024-01-22 14:33           ` Thomas Richard
2024-01-22 14:33           ` Thomas Richard
2024-01-23 12:44           ` Andy Shevchenko
2024-01-23 12:44             ` Andy Shevchenko
2024-01-23 12:44             ` Andy Shevchenko
2024-01-31  8:05   ` Linus Walleij
2024-01-31  8:05     ` Linus Walleij
2024-01-31  8:05     ` Linus Walleij
2024-01-15 16:14 ` [PATCH 03/14] i2c: omap: wakeup the controller during suspend callback Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 20:03   ` Andy Shevchenko
2024-01-15 20:03     ` Andy Shevchenko
2024-01-15 20:03     ` Andy Shevchenko
2024-01-15 16:14 ` [PATCH 04/14] mux: mmio: Add resume support Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 20:05   ` Andy Shevchenko
2024-01-15 20:05     ` Andy Shevchenko
2024-01-15 20:05     ` Andy Shevchenko
2024-01-15 22:31   ` Peter Rosin
2024-01-15 22:31     ` Peter Rosin
2024-01-15 22:31     ` Peter Rosin
2024-01-19 16:25     ` Thomas Richard
2024-01-19 16:25       ` Thomas Richard
2024-01-19 16:25       ` Thomas Richard
2024-01-15 16:14 ` [PATCH 05/14] phy: ti: phy-j721e-wiz: make wiz_clock_init callable multiple times Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-23  7:18   ` Vinod Koul
2024-01-23  7:18     ` Vinod Koul
2024-01-23  7:18     ` Vinod Koul
2024-01-23  8:20     ` Thomas Richard
2024-01-23  8:20       ` Thomas Richard
2024-01-23  8:20       ` Thomas Richard
2024-01-23 14:02       ` Vinod Koul
2024-01-23 14:02         ` Vinod Koul
2024-01-23 14:02         ` Vinod Koul
2024-01-15 16:14 ` [PATCH 06/14] phy: ti: phy-j721e-wiz: add resume support Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` [PATCH 07/14] phy: cadence-torrent: extract calls to clk_get from cdns_torrent_clk Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` [PATCH 08/14] phy: cadence-torrent: register resets even if the phy is already configured Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` [PATCH 09/14] phy: cadence-torrent: move already_configured to struct cdns_torrent_phy Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` [PATCH 10/14] phy: cadence-torrent: remove noop_ops phy operations Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` [PATCH 11/14] phy: cadence-torrent: add suspend and resume support Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-16 18:22   ` Bjorn Helgaas
2024-01-16 18:22     ` Bjorn Helgaas
2024-01-16 18:22     ` Bjorn Helgaas
2024-01-22 14:24     ` Thomas Richard
2024-01-22 14:24       ` Thomas Richard
2024-01-22 14:24       ` Thomas Richard
2024-01-17 15:12   ` Philipp Zabel
2024-01-17 15:12     ` Philipp Zabel
2024-01-17 15:12     ` Philipp Zabel
2024-01-22 14:28     ` Thomas Richard
2024-01-22 14:28       ` Thomas Richard
2024-01-22 14:28       ` Thomas Richard
2024-01-15 16:14 ` [PATCH 12/14] PCI: cadence: add resume support to cdns_pcie_host_setup() Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14 ` Thomas Richard [this message]
2024-01-15 16:14   ` [PATCH 13/14] PCI: j721e: move reset GPIO to device struct Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 20:08   ` Andy Shevchenko
2024-01-15 20:08     ` Andy Shevchenko
2024-01-15 20:08     ` Andy Shevchenko
2024-01-16 18:19   ` Bjorn Helgaas
2024-01-16 18:19     ` Bjorn Helgaas
2024-01-16 18:19     ` Bjorn Helgaas
2024-01-15 16:14 ` [PATCH 14/14] PCI: j721e: add suspend and resume support Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 16:14   ` Thomas Richard
2024-01-15 20:13   ` Andy Shevchenko
2024-01-15 20:13     ` Andy Shevchenko
2024-01-15 20:13     ` Andy Shevchenko
2024-01-22 15:30     ` Thomas Richard
2024-01-22 15:30       ` Thomas Richard
2024-01-22 15:30       ` Thomas Richard
2024-01-22 21:36       ` Andy Shevchenko
2024-01-22 21:36         ` Andy Shevchenko
2024-01-22 21:36         ` Andy Shevchenko
2024-01-24 14:09         ` Thomas Richard
2024-01-24 14:09           ` Thomas Richard
2024-01-24 14:09           ` Thomas Richard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240102-j7200-pcie-s2r-v1-13-84e55da52400@bootlin.com \
    --to=thomas.richard@bootlin.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=andi.shyti@kernel.org \
    --cc=andy@kernel.org \
    --cc=bhelgaas@google.com \
    --cc=brgl@bgdev.pl \
    --cc=gregory.clement@bootlin.com \
    --cc=haojian.zhuang@linaro.org \
    --cc=jmkrzyszt@gmail.com \
    --cc=kishon@kernel.org \
    --cc=kw@linux.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-i2c@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=lpieralisi@kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=peda@axentia.se \
    --cc=robh@kernel.org \
    --cc=theo.lebrun@bootlin.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tjoseph@cadence.com \
    --cc=tony@atomide.com \
    --cc=u-kumar1@ti.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.