[PATCH v6 0/7] arm64: dts: add description for solidrun am642 som and hummingboard evb

[Josua Mayer <josua@solid-run.com>]

This series adds DT bindings and dts descriptions for SolidRun AM642
based SoM and Hummingboard EVB.

Additionally a commit from downstream vendor kernel are included,
enhancing support for pru based ethernet.
I wasn't sure how to properly annotate it in commit description /
signed-off area ...:

1. add description for "Industrial Ethernet Peripherals" (IEP) to am64
   https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/commit/arch/arm64/boot/dts/ti/k3-am64-main.dtsi?h=ti-linux-6.1.y-cicd&id=5afb73d82a014b59462162d960b350b8c58e5ae6
   IEP is already supported in-tree by a driver, and used in
   k3-am65-main.dtsi.

Unfortunately dtbs_check still reports one problem:

- 'mux-controller' does not match any of the regexes
  The expectation seems to be that a mux-controller at minimum has an
  address, something to put behind an @, e.g. "mux-controller@7".
  However this mux is not on a bus, it is just a gpio-mux,
  not sure how to name it better.

Signed-off-by: Josua Mayer <josua@solid-run.com>
---
Changes in v6:
- renamed pinctrl nodes to *-default-pins
  (reported by Vignesh Raghavendra <vigneshr@ti.com>)
  (dropped Reviewed-by: Andrew Davis <afd@ti.com>)
- removed tabs from pinctrl comments to shorten lines
- updated humidity sensor yaml with interrupts property
- updated spi-nor flash yaml with interrupts property
- Link to v5: https://lore.kernel.org/r/20240211-add-am64-som-v5-0-790ed7121249@solid-run.com

Changes in v5:
- abracon,abx80x.yaml:
  - reworded 'compatible' description
  - removed $ref to interrupts.yaml
  - nested example in fake i2c
  - changed maintainer to rtc list
  (reported by Conor Dooley <conor@kernel.org>)
- patch 4/5 dts:
  - re-added status properties for sdhci nodes
    k3-am64-main.dtsi has been changed in-tree since v1
    such that sdhci nodes are explicitly status disabled now.
  - picked up reviewed-by
  (reported by Andrew Davis <afd@ti.com>)
- Link to v4: https://lore.kernel.org/r/20240202-add-am64-som-v4-0-5f8b12af5e71@solid-run.com

Changes in v4:
- abracon,abx80x.yaml: fixed dtc error in example irq reference
- Link to v3: https://lore.kernel.org/r/20240202-add-am64-som-v3-0-2f44023d50e9@solid-run.com

Changes in v3:
- removed lots more status properties, double-checked against soc dtsi
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
  (reported by Andrew Davis <afd@ti.com>)
- removed intentionally-disabled pcie node from dts
- rewrote yaml bindings to use enum instead of anyof+const+description
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
- abracon yaml
  - added missing maintainer
  - added diode type property type
  - added example
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
  - added reference to /schemas/interrupts.yaml#
- use generic name for pru ethernet controller node
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>)
- removed unnamed dmas from pru ethernet controller node
- moved pcie/usb3 features to dtb overlays
- Link to v2: https://lore.kernel.org/r/20240112-add-am64-som-v2-0-1385246c428c@solid-run.com

Changes in v2:
- reordered patchset to drop separate patch adding iep handle to som
- moved dtbs_check warnings to cover letter
- converted abracon abx80x rtc bindings to yaml
- updated dts:
  - remove unnecessary status properties
  - changed non-generic node names
  - use color property for led descriptions,
    they have no default function on evaluation board
  - drop earlycon bootargs from chosen node
  (reported by Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>)
- converted charger node to comment, part not assembled, has no bindings
- picked up acked-by on board bindings patch
- Link to v1: https://lore.kernel.org/r/20240103-add-am64-som-v1-0-dda1f9227aef@solid-run.com

---
Josua Mayer (6):
      dt-bindings: arm: ti: Add bindings for SolidRun AM642 HummingBoard-T
      dt-bindings: rtc: abx80x: convert to yaml
      dt-bindings: iio: humidity: hdc20x0: add optional interrupts property
      dt-bindings: mtd: spi-nor: add optional interrupts property
      arm64: dts: add description for solidrun am642 som and evaluation board
      arm64: dts: ti: hummingboard-t: add overlays for m.2 pci-e and usb-3

Suman Anna (1):
      arm64: dts: ti: k3-am64-main: Add ICSSG IEP nodes

 Documentation/devicetree/bindings/arm/ti/k3.yaml   |   7 +
 .../bindings/iio/humidity/ti,hdc2010.yaml          |   3 +
 .../devicetree/bindings/mtd/jedec,spi-nor.yaml     |   3 +
 .../devicetree/bindings/rtc/abracon,abx80x.txt     |  31 --
 .../devicetree/bindings/rtc/abracon,abx80x.yaml    |  79 +++
 arch/arm64/boot/dts/ti/Makefile                    |   7 +
 arch/arm64/boot/dts/ti/k3-am64-main.dtsi           |  24 +
 .../boot/dts/ti/k3-am642-hummingboard-t-pcie.dtso  |  45 ++
 .../boot/dts/ti/k3-am642-hummingboard-t-usb3.dtso  |  44 ++
 arch/arm64/boot/dts/ti/k3-am642-hummingboard-t.dts | 292 ++++++++++
 arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi        | 594 +++++++++++++++++++++
 11 files changed, 1098 insertions(+), 31 deletions(-)
---
base-commit: 83d0ff463b50d2395e05339a34e35d14ba82043f
change-id: 20240101-add-am64-som-51a1ca47edf3

Sincerely,
-- 
Josua Mayer <josua@solid-run.com>